mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* kernel: ata1: DMA timeout, stat 0x1
@ 2003-11-04 12:51 Erno Rigo
  2003-11-04 13:01 ` Erno Rigo
  0 siblings, 1 reply; 3+ messages in thread
From: Erno Rigo @ 2003-11-04 12:51 UTC (permalink / raw)
  To: linux-kernel; +Cc: jgarzik


Hello!

[1.] One line summary of the problem:

kernel: ata1: DMA timeout, stat 0x1

[2.] Full description of the problem/report:

I've just purchased a VIA KT600 based mainboard and a Seagate Barracuda 120G 
SATA drive. The controller and the drive is properly recognized, but after a 
while, independent of the workload, I get the above error, and the drive 
bails out. (It's unaccessible from the point I get the message).

I've also tried the backport in 2.4.22-ac4, it's a bit more verbose, and 
complains about a 'scsi Media Sense error' before the dma timeout.

[3.] Keywords (i.e., modules, networking, kernel):

VIA, SATA

[4.] Kernel version (from /proc/version):

Linux version 2.6.0-test9 (root@mcree) (gcc version 3.3.2 20030908 (Debian 
prerelease)) #6 Tue Nov 4 13:11:19 CET 2003

[5.] Output of Oops.. message (if applicable) with symbolic information
     resolved (see Documentation/oops-tracing.txt)

N/A

[6.] A small shell script or example program which triggers the
     problem (if possible)

Normal usage. (Sometimes I can cp tens of gigabytes, sometimes I can't even 
change to a directory)

[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)

Linux mcree 2.6.0-test9 #6 Tue Nov 4 13:11:19 CET 2003 i686 GNU/Linux

Gnu C                  3.3.2
Gnu make               3.80
util-linux             2.12
mount                  2.12
module-init-tools      0.9.15-pre2
e2fsprogs              1.35-WIP
Linux C Library        2.3.2
Dynamic linker (ldd)   2.3.2
Procps                 3.1.12
Net-tools              1.60
Console-tools          0.2.3
Sh-utils               5.0.90
Modules Loaded

[7.2.] Processor information (from /proc/cpuinfo):

processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 6
model           : 8
model name      : AMD Athlon(TM) XP 2100+
stepping        : 1
cpu MHz         : 1734.223
cache size      : 256 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips        : 3416.06

[7.3.] Module information (from /proc/modules):

empty

[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)

[root@mcree| /usr/src/linux-2.6.0-test9/scripts]#cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
8400-84ff : 0000:00:13.0
  8400-84ff : tulip
8800-881f : 0000:00:10.3
9000-901f : 0000:00:10.2
9400-941f : 0000:00:10.1
9800-981f : 0000:00:10.0
a000-a00f : 0000:00:0f.1
  a000-a007 : ide0
  a008-a00f : ide1
a400-a4ff : 0000:00:0f.0
  a400-a4ff : libata
a800-a80f : 0000:00:0f.0
  a800-a80f : libata
b000-b003 : 0000:00:0f.0
  b000-b003 : libata
b400-b407 : 0000:00:0f.0
  b400-b407 : libata
b800-b803 : 0000:00:0f.0
  b800-b803 : libata
d000-d007 : 0000:00:0f.0
  d000-d007 : libata
d400-d43f : 0000:00:0e.0
d800-d8ff : 0000:00:09.0

[root@mcree| /usr/src/linux-2.6.0-test9/scripts]#cat /proc/iomem
00000000-0009d7ff : System RAM
0009d800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-1fffbfff : System RAM
  00100000-0034aa64 : Kernel code
  0034aa65-004195ff : Kernel data
1fffc000-1fffefff : ACPI Tables
1ffff000-1fffffff : ACPI Non-volatile Storage
ea800000-ea8003ff : 0000:00:13.0
  ea800000-ea8003ff : tulip
eb000000-eb0000ff : 0000:00:10.4
eb800000-eb803fff : 0000:00:09.0
ec000000-edefffff : PCI Bus #01
  ec000000-ecffffff : 0000:01:00.0
ee000000-ee000fff : 0000:00:0d.1
ee800000-ee800fff : 0000:00:0d.0
  ee800000-ee800fff : bttv0
ef700000-f7ffffff : PCI Bus #01
  ef800000-ef87ffff : 0000:01:00.0
  f0000000-f7ffffff : 0000:01:00.0
f8000000-fbffffff : 0000:00:00.0
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved

[7.5.] PCI information ('lspci -vvv' as root)

[root@mcree| /usr/src/linux-2.6.0-test9/scripts]#lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge 
(rev 80)
        Subsystem: Asustek Computer, Inc.: Unknown device 807f
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [80] AGP version 3.5
                Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 
64bit- FW- AGP3- Rate=x1,x2,x4
                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- 
Rate=<none>
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device b198 (prog-if 00 
[Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000e000-0000dfff
        Memory behind bridge: ec000000-edefffff
        Prefetchable memory behind bridge: ef700000-f7ffffff
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.0 Ethernet controller: 3Com Corporation: Unknown device 1700 (rev 12)
        Subsystem: Asustek Computer, Inc.: Unknown device 80eb
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (5750ns min, 7750ns max), cache line size 08
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at eb800000 (32-bit, non-prefetchable) [disabled] 
[size=16K]
        Region 1: I/O ports at d800 [disabled] [size=256]
        Capabilities: [48] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2
+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=7 DScale=1 PME-
        Capabilities: [50] Vital Product Data

00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture 
(rev 11)
        Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (4000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at ee800000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 
11)
        Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver, 
audio section)
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (1000ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at ee000000 (32-bit, prefetchable) [disabled] 
[size=4K]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0e.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
        Subsystem: Ensoniq Creative Sound Blaster AudioPCI128
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (3000ns min, 32000ns max)
        Interrupt: pin A routed to IRQ 0
        Region 0: I/O ports at d400 [disabled] [size=64]
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.0 RAID bus controller: VIA Technologies, Inc.: Unknown device 3149 (rev 
80)
        Subsystem: Asustek Computer, Inc.: Unknown device 80ed
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32
        Interrupt: pin A routed to IRQ 9
        Region 0: I/O ports at d000 [size=8]
        Region 1: I/O ports at b800 [size=4]
        Region 2: I/O ports at b400 [size=8]
        Region 3: I/O ports at b000 [size=4]
        Region 4: I/O ports at a800 [size=16]
        Region 5: I/O ports at a400 [size=256]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus 
Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
        Subsystem: Asustek Computer, Inc.: Unknown device 80ed
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32
        Interrupt: pin A routed to IRQ 3
        Region 4: I/O ports at a000 [size=16]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 81) (prog-if 00 
[UHCI])
        Subsystem: Asustek Computer, Inc.: Unknown device 80ed
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, cache line size 08
        Interrupt: pin A routed to IRQ 9
        Region 4: I/O ports at 9800 [size=32]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2
+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 81) (prog-if 00 
[UHCI])
        Subsystem: Asustek Computer, Inc.: Unknown device 80ed
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, cache line size 08
        Interrupt: pin A routed to IRQ 9
        Region 4: I/O ports at 9400 [size=32]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2
+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 81) (prog-if 00 
[UHCI])
        Subsystem: Asustek Computer, Inc.: Unknown device 80ed
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, cache line size 08
        Interrupt: pin B routed to IRQ 11
        Region 4: I/O ports at 9000 [size=32]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2
+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.3 USB Controller: VIA Technologies, Inc. USB (rev 81) (prog-if 00 
[UHCI])
        Subsystem: Asustek Computer, Inc.: Unknown device 80ed
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, cache line size 08
        Interrupt: pin B routed to IRQ 11
        Region 4: I/O ports at 8800 [size=32]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2
+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 
[EHCI])
        Subsystem: Asustek Computer, Inc.: Unknown device 80ed
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, cache line size 08
        Interrupt: pin C routed to IRQ 10
        Region 0: Memory at eb000000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2
+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.0 ISA bridge: VIA Technologies, Inc.: Unknown device 3227
        Subsystem: Asustek Computer, Inc.: Unknown device 80ed
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping+ SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:13.0 Ethernet controller: Accton Technology Corporation EN-1216 Ethernet 
Adapter (rev 11)
        Subsystem: Standard Microsystems Corp [SMC]: Unknown device 1255
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (63750ns min, 63750ns max), cache line size 08
        Interrupt: pin A routed to IRQ 5
        Region 0: I/O ports at 8400 [size=256]
        Region 1: Memory at ea800000 (32-bit, non-prefetchable) [size=1K]
        Expansion ROM at <unassigned> [disabled] [size=128K]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA PME(D0+,D1+,D2
+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] 
(rev a3) (prog-if 00 [VGA])
        Subsystem: ABIT Computer Corp. Abit Siluro GeForce4MX440
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
        Region 2: Memory at ef800000 (32-bit, prefetchable) [size=512K]
        Expansion ROM at ef7e0000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [44] AGP version 2.0
                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 
64bit- FW+ AGP3- Rate=x1,x2,x4
                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- 
Rate=<none>

[7.6.] SCSI information (from /proc/scsi/scsi)

[root@mcree| /usr/src/linux-2.6.0-test9/scripts]#cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: ST3120026AS      Rev: 0.75
  Type:   Direct-Access                    ANSI SCSI revision: 05


[7.7.] Other information that might be relevant to the problem
       (please look in /proc and include all information that you
       think to be relevant):

[root@mcree| /usr/src/linux-2.6.0-test9/scripts]#hdparm /dev/scsi/host0/bus0/
target0/lun0/disc

/dev/scsi/host0/bus0/target0/lun0/disc:
 readonly     =  0 (off)

(Hangs here in kernel mode - unable to kill -9 it)

[X.] Other notes, patches, fixes, workarounds:

Please CC your additional questions to mcree@freemail.hu, as I'm not on the 
kernel mailing list.

-- 
McRee

^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-11-04 13:47 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-11-04 12:51 kernel: ata1: DMA timeout, stat 0x1 Erno Rigo
2003-11-04 13:01 ` Erno Rigo
2003-11-04 13:48   ` Erno Rigo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®