From: Peter Williams <pwil3058@bigpond.net.au>
To: Mike Galbraith <efault@gmx.de>
Cc: Con Kolivas <kernel@kolivas.org>,
Peter Williams <pwil3058@bigpond.net.au>,
Linux Kernel <linux-kernel@vger.kernel.org>,
Kingsley Cheung <kingsley@aurema.com>,
Ingo Molnar <mingo@elte.hu>,
Rene Herman <rene.herman@keyaccess.nl>
Subject: [RFC 3/5] sched: Add CPU rate hard caps
Date: Fri, 26 May 2006 14:20:51 +1000 [thread overview]
Message-ID: <20060526042051.2886.70594.sendpatchset@heathwren.pw.nest> (raw)
In-Reply-To: <20060526042021.2886.4957.sendpatchset@heathwren.pw.nest>
This patch implements hard CPU rate caps per task as a proportion of a
single CPU's capacity expressed in parts per thousand.
Signed-off-by: Peter Williams <pwil3058@bigpond.com.au>
include/linux/sched.h | 8 ++
kernel/Kconfig.caps | 14 +++-
kernel/sched.c | 154 ++++++++++++++++++++++++++++++++++++++++++++++++--
3 files changed, 168 insertions(+), 8 deletions(-)
Index: MM-2.6.17-rc4-mm3/include/linux/sched.h
===================================================================
--- MM-2.6.17-rc4-mm3.orig/include/linux/sched.h 2006-05-26 10:46:35.000000000 +1000
+++ MM-2.6.17-rc4-mm3/include/linux/sched.h 2006-05-26 11:00:07.000000000 +1000
@@ -796,6 +796,10 @@ struct task_struct {
#ifdef CONFIG_CPU_RATE_CAPS
unsigned long long avg_cpu_per_cycle, avg_cycle_length;
unsigned int cpu_rate_cap;
+#ifdef CONFIG_CPU_RATE_HARD_CAPS
+ unsigned int cpu_rate_hard_cap;
+ struct timer_list sinbin_timer;
+#endif
#endif
enum sleep_type sleep_type;
@@ -994,6 +998,10 @@ struct task_struct {
#ifdef CONFIG_CPU_RATE_CAPS
unsigned int get_cpu_rate_cap(const struct task_struct *);
int set_cpu_rate_cap(struct task_struct *, unsigned int);
+#ifdef CONFIG_CPU_RATE_HARD_CAPS
+unsigned int get_cpu_rate_hard_cap(const struct task_struct *);
+int set_cpu_rate_hard_cap(struct task_struct *, unsigned int);
+#endif
#endif
static inline pid_t process_group(struct task_struct *tsk)
Index: MM-2.6.17-rc4-mm3/kernel/Kconfig.caps
===================================================================
--- MM-2.6.17-rc4-mm3.orig/kernel/Kconfig.caps 2006-05-26 10:45:26.000000000 +1000
+++ MM-2.6.17-rc4-mm3/kernel/Kconfig.caps 2006-05-26 11:00:07.000000000 +1000
@@ -3,11 +3,21 @@
#
config CPU_RATE_CAPS
- bool "Support (soft) CPU rate caps"
+ bool "Support CPU rate caps"
default n
---help---
- Say y here if you wish to be able to put a (soft) upper limit on
+ Say y here if you wish to be able to put a soft upper limit on
the rate of CPU usage by individual tasks. A task which has been
allocated a soft CPU rate cap will be limited to that rate of CPU
usage unless there is spare CPU resources available after the needs
of uncapped tasks are met.
+
+config CPU_RATE_HARD_CAPS
+ bool "Support CPU rate hard caps"
+ depends on CPU_RATE_CAPS
+ default n
+ ---help---
+ Say y here if you wish to be able to put a hard upper limit on
+ the rate of CPU usage by individual tasks. A task which has been
+ allocated a hard CPU rate cap will be limited to that rate of CPU
+ usage regardless of whether there is spare CPU resources available.
Index: MM-2.6.17-rc4-mm3/kernel/sched.c
===================================================================
--- MM-2.6.17-rc4-mm3.orig/kernel/sched.c 2006-05-26 11:00:02.000000000 +1000
+++ MM-2.6.17-rc4-mm3/kernel/sched.c 2006-05-26 13:50:11.000000000 +1000
@@ -201,21 +201,33 @@ static inline unsigned int task_timeslic
#ifdef CONFIG_CPU_RATE_CAPS
#define CAP_STATS_OFFSET 8
+#ifdef CONFIG_CPU_RATE_HARD_CAPS
+static void sinbin_release_fn(unsigned long arg);
+#define min_cpu_rate_cap(p) min((p)->cpu_rate_cap, (p)->cpu_rate_hard_cap)
+#else
+#define min_cpu_rate_cap(p) (p)->cpu_rate_cap
+#endif
#define task_has_cap(p) unlikely((p)->flags & PF_HAS_CAP)
/* this assumes that p is not a real time task */
#define task_is_background(p) unlikely((p)->cpu_rate_cap == 0)
#define task_being_capped(p) unlikely((p)->prio >= CAPPED_PRIO)
-#define cap_load_weight(p) (((p)->cpu_rate_cap * SCHED_LOAD_SCALE) / 1000)
+#define cap_load_weight(p) ((min_cpu_rate_cap(p) * SCHED_LOAD_SCALE) / 1000)
static void init_cpu_rate_caps(task_t *p)
{
p->cpu_rate_cap = 1000;
p->flags &= ~PF_HAS_CAP;
+#ifdef CONFIG_CPU_RATE_HARD_CAPS
+ p->cpu_rate_hard_cap = 1000;
+ init_timer(&p->sinbin_timer);
+ p->sinbin_timer.function = sinbin_release_fn;
+ p->sinbin_timer.data = (unsigned long) p;
+#endif
}
static inline void set_cap_flag(task_t *p)
{
- if (p->cpu_rate_cap < 1000 && !has_rt_policy(p))
+ if (min_cpu_rate_cap(p) < 1000 && !has_rt_policy(p))
p->flags |= PF_HAS_CAP;
else
p->flags &= ~PF_HAS_CAP;
@@ -223,7 +235,7 @@ static inline void set_cap_flag(task_t *
static inline int task_exceeding_cap(const task_t *p)
{
- return (p->avg_cpu_per_cycle * 1000) > (p->avg_cycle_length * p->cpu_rate_cap);
+ return (p->avg_cpu_per_cycle * 1000) > (p->avg_cycle_length * min_cpu_rate_cap(p));
}
#ifdef CONFIG_SCHED_SMT
@@ -257,7 +269,7 @@ static int task_exceeding_cap_now(const
delta = (now > p->timestamp) ? (now - p->timestamp) : 0;
lhs = (p->avg_cpu_per_cycle + delta) * 1000;
- rhs = (p->avg_cycle_length + delta) * p->cpu_rate_cap;
+ rhs = (p->avg_cycle_length + delta) * min_cpu_rate_cap(p);
return lhs > rhs;
}
@@ -266,6 +278,10 @@ static inline void init_cap_stats(task_t
{
p->avg_cpu_per_cycle = 0;
p->avg_cycle_length = 0;
+#ifdef CONFIG_CPU_RATE_HARD_CAPS
+ init_timer(&p->sinbin_timer);
+ p->sinbin_timer.data = (unsigned long) p;
+#endif
}
static inline void inc_cap_stats_cycle(task_t *p, unsigned long long now)
@@ -1213,6 +1229,64 @@ static void deactivate_task(struct task_
p->array = NULL;
}
+#ifdef CONFIG_CPU_RATE_HARD_CAPS
+#define task_has_hard_cap(p) unlikely((p)->cpu_rate_hard_cap < 1000)
+
+/*
+ * Release a task from the sinbin
+ */
+static void sinbin_release_fn(unsigned long arg)
+{
+ unsigned long flags;
+ struct task_struct *p = (struct task_struct*)arg;
+ struct runqueue *rq = task_rq_lock(p, &flags);
+
+ p->prio = effective_prio(p);
+
+ __activate_task(p, rq);
+
+ task_rq_unlock(rq, &flags);
+}
+
+static unsigned long reqd_sinbin_ticks(const task_t *p)
+{
+ unsigned long long res;
+
+ res = p->avg_cpu_per_cycle * 1000;
+
+ if (res > p->avg_cycle_length * p->cpu_rate_hard_cap) {
+ (void)do_div(res, p->cpu_rate_hard_cap);
+ res -= p->avg_cpu_per_cycle;
+ /*
+ * IF it was available we'd also subtract
+ * the average sleep per cycle here
+ */
+ res >>= CAP_STATS_OFFSET;
+ (void)do_div(res, (1000000000 / HZ));
+
+ return res ? : 1;
+ }
+
+ return 0;
+}
+
+static void sinbin_task(task_t *p, unsigned long durn)
+{
+ if (durn == 0)
+ return;
+ deactivate_task(p, task_rq(p));
+ p->sinbin_timer.expires = jiffies + durn;
+ add_timer(&p->sinbin_timer);
+}
+#else
+#define task_has_hard_cap(p) 0
+#define reqd_sinbin_ticks(p) 0
+
+static inline void sinbin_task(task_t *p, unsigned long durn)
+{
+}
+#endif
+
/*
* resched_task - mark a task 'to be rescheduled now'.
*
@@ -3508,9 +3582,16 @@ need_resched_nonpreemptible:
}
}
- /* do this now so that stats are correct for SMT code */
- if (task_has_cap(prev))
+ if (task_has_cap(prev)) {
inc_cap_stats_both(prev, now);
+ if (task_has_hard_cap(prev) && !prev->state &&
+ !rt_task(prev) && !signal_pending(prev)) {
+ unsigned long sinbin_ticks = reqd_sinbin_ticks(prev);
+
+ if (sinbin_ticks)
+ sinbin_task(prev, sinbin_ticks);
+ }
+ }
cpu = smp_processor_id();
if (unlikely(!rq->nr_running)) {
@@ -4539,6 +4620,67 @@ out:
}
EXPORT_SYMBOL(set_cpu_rate_cap);
+
+#ifdef CONFIG_CPU_RATE_HARD_CAPS
+unsigned int get_cpu_rate_hard_cap(const struct task_struct *p)
+{
+ return p->cpu_rate_hard_cap;
+}
+
+EXPORT_SYMBOL(get_cpu_rate_hard_cap);
+
+/*
+ * Require: 1 <= new_cap <= 1000
+ */
+int set_cpu_rate_hard_cap(struct task_struct *p, unsigned int new_cap)
+{
+ int is_allowed;
+ unsigned long flags;
+ struct runqueue *rq;
+ int delta;
+
+ if (new_cap > 1000 && new_cap > 0)
+ return -EINVAL;
+ is_allowed = capable(CAP_SYS_NICE);
+ /*
+ * We have to be careful, if called from /proc code,
+ * the task might be in the middle of scheduling on another CPU.
+ */
+ rq = task_rq_lock(p, &flags);
+ delta = new_cap - p->cpu_rate_hard_cap;
+ if (!is_allowed) {
+ /*
+ * Ordinary users can set/change caps on their own tasks
+ * provided that the new setting is MORE constraining
+ */
+ if (((current->euid != p->uid) && (current->uid != p->uid)) || (delta > 0)) {
+ task_rq_unlock(rq, &flags);
+ return -EPERM;
+ }
+ }
+ /*
+ * The RT tasks don't have caps, but we still allow the caps to be
+ * set - but as expected it wont have any effect on scheduling until
+ * the task becomes SCHED_NORMAL/SCHED_BATCH:
+ */
+ p->cpu_rate_hard_cap = new_cap;
+
+ if (has_rt_policy(p))
+ goto out;
+
+ if (p->array)
+ dec_raw_weighted_load(rq, p);
+ set_load_weight(p);
+ if (p->array)
+ inc_raw_weighted_load(rq, p);
+out:
+ task_rq_unlock(rq, &flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(set_cpu_rate_hard_cap);
+#endif
#endif
long sched_setaffinity(pid_t pid, cpumask_t new_mask)
--
Peter Williams pwil3058@bigpond.net.au
"Learning, n. The kind of ignorance distinguishing the studious."
-- Ambrose Bierce
next prev parent reply other threads:[~2006-05-26 4:21 UTC|newest]
Thread overview: 100+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-26 4:20 [RFC 0/5] sched: Add CPU rate caps Peter Williams
2006-05-26 4:20 ` [RFC 1/5] sched: Fix priority inheritence before CPU rate soft caps Peter Williams
2006-05-26 4:20 ` [RFC 2/5] sched: Add " Peter Williams
2006-05-26 10:48 ` Con Kolivas
2006-05-26 11:15 ` Mike Galbraith
2006-05-26 11:17 ` Con Kolivas
2006-05-26 11:30 ` Mike Galbraith
2006-05-26 13:55 ` Peter Williams
2006-05-27 6:31 ` Balbir Singh
2006-05-27 7:03 ` Peter Williams
2006-05-28 0:11 ` Peter Williams
2006-05-28 7:38 ` Balbir Singh
2006-05-28 13:35 ` Peter Williams
2006-05-28 14:42 ` Balbir Singh
2006-05-28 23:27 ` Peter Williams
2006-05-31 13:17 ` Kirill Korotaev
2006-05-31 23:39 ` Peter Williams
2006-06-01 8:09 ` Kirill Korotaev
2006-06-01 23:38 ` Peter Williams
2006-06-02 1:35 ` Peter Williams
2006-05-26 4:20 ` Peter Williams [this message]
2006-05-26 6:58 ` [RFC 3/5] sched: Add CPU rate hard caps Kari Hurtta
2006-05-27 1:00 ` Peter Williams
2006-05-26 11:00 ` Con Kolivas
2006-05-26 13:59 ` Peter Williams
2006-05-26 14:12 ` Con Kolivas
2006-05-26 14:23 ` Mike Galbraith
2006-05-27 0:16 ` Peter Williams
2006-05-27 9:28 ` Mike Galbraith
2006-05-28 2:09 ` Peter Williams
2006-05-27 6:48 ` Balbir Singh
2006-05-27 8:44 ` Peter Williams
2006-05-31 13:10 ` Kirill Korotaev
2006-05-31 15:59 ` Balbir Singh
2006-05-31 18:09 ` Mike Galbraith
2006-06-01 7:41 ` Kirill Korotaev
2006-06-01 8:34 ` Balbir Singh
2006-06-01 18:43 ` [ckrm-tech] " Chandra Seetharaman
2006-06-01 23:26 ` Peter Williams
2006-06-02 2:02 ` Chandra Seetharaman
2006-06-02 3:21 ` Peter Williams
2006-06-02 8:32 ` Balbir Singh
2006-06-02 13:30 ` Peter Williams
2006-06-02 18:58 ` Balbir Singh
2006-06-02 23:49 ` Peter Williams
2006-06-03 4:59 ` Balbir Singh
2006-06-02 19:06 ` Chandra Seetharaman
2006-06-03 0:04 ` Peter Williams
2006-06-02 0:36 ` Con Kolivas
2006-06-02 2:03 ` [ckrm-tech] " Chandra Seetharaman
2006-06-02 5:55 ` [ckrm-tech] [RFC 3/5] " Peter Williams
2006-06-02 7:47 ` Kirill Korotaev
2006-06-02 13:34 ` Peter Williams
2006-06-05 22:11 ` Sam Vilain
2006-06-06 8:24 ` Kirill Korotaev
2006-06-06 9:13 ` Con Kolivas
2006-06-06 9:28 ` Kirill Korotaev
2006-06-02 8:46 ` Mike Galbraith
2006-06-02 13:18 ` Peter Williams
2006-06-02 14:47 ` Mike Galbraith
2006-06-03 0:08 ` Peter Williams
2006-06-03 6:02 ` Mike Galbraith
2006-06-03 11:03 ` Peter Williams
2006-06-06 11:26 ` Srivatsa Vaddagiri
2006-06-02 7:34 ` Kirill Korotaev
2006-06-02 21:23 ` Shailabh Nagar
2006-06-01 23:47 ` Sam Vilain
2006-06-01 23:43 ` Peter Williams
2006-05-31 23:28 ` Peter Williams
2006-06-01 7:44 ` Kirill Korotaev
2006-06-01 23:21 ` Peter Williams
2006-05-26 4:21 ` [RFC 4/5] sched: Add procfs interface for CPU rate soft caps Peter Williams
2006-05-26 4:21 ` [RFC 5/5] sched: Add procfs interface for CPU rate hard caps Peter Williams
2006-05-26 8:04 ` [RFC 0/5] sched: Add CPU rate caps Mike Galbraith
2006-05-26 16:11 ` Björn Steinbrink
2006-05-28 22:46 ` Sam Vilain
2006-05-28 23:30 ` Peter Williams
2006-05-29 3:09 ` Sam Vilain
2006-05-29 3:41 ` Peter Williams
2006-05-29 21:16 ` Sam Vilain
2006-05-29 23:12 ` Peter Williams
2006-05-30 2:07 ` Sam Vilain
2006-05-30 2:45 ` Peter Williams
2006-05-30 22:05 ` Sam Vilain
2006-05-30 23:22 ` Peter Williams
2006-05-30 23:25 ` Peter Williams
2006-06-05 23:56 ` Peter Williams
2006-05-27 0:16 ` Peter Williams
2006-05-26 10:41 ` Con Kolivas
2006-05-27 1:28 ` Peter Williams
2006-05-27 1:42 ` Con Kolivas
2006-05-26 11:09 ` Con Kolivas
2006-05-26 14:00 ` Peter Williams
2006-05-26 11:29 ` Balbir Singh
2006-05-27 1:40 ` Peter Williams
2006-06-01 21:03 [RFC 3/5] sched: Add CPU rate hard caps Al Boldi
2006-06-02 1:33 ` Peter Williams
2006-06-02 11:23 ` Matt Helsley
2006-06-02 13:16 ` Peter Williams
2006-06-06 10:47 ` Srivatsa Vaddagiri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060526042051.2886.70594.sendpatchset@heathwren.pw.nest \
--to=pwil3058@bigpond.net.au \
--cc=efault@gmx.de \
--cc=kernel@kolivas.org \
--cc=kingsley@aurema.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=rene.herman@keyaccess.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®