From: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
To: Christoph Hellwig <hch@infradead.org>,
David Smith <dsmith@redhat.com>,
linux-kernel@vger.kernel.org, shemminger@osdl.org
Subject: Re: [PATCH 1/3] Kprobes: Make kprobe modules more portable
Date: Fri, 11 Aug 2006 14:23:31 +0530 [thread overview]
Message-ID: <20060811085331.GA7816@in.ibm.com> (raw)
In-Reply-To: <20060809161854.GA13622@infradead.org>
On Wed, Aug 09, 2006 at 05:18:54PM +0100, Christoph Hellwig wrote:
> On Wed, Aug 09, 2006 at 05:10:39PM +0100, Christoph Hellwig wrote:
> > On Wed, Aug 09, 2006 at 11:01:45AM -0500, David Smith wrote:
> > > > + if (p->symbol_name) {
> > > > + if (p->addr)
> > > > + return -EINVAL;
> > > > + p->addr = kprobe_lookup_name(p->symbol_name) + p->offset;
> > > > + }
> > >
> > > What if kprobe_lookup_name() fails
> >
> > for that case we need the check in your snipplet below.
> >
> > > or if CONFIG_KALLSYMS isn't set?
> >
> > I think we should just disallow that case. having kprobes without kallsyms
> > is rather pointless. I'll send a patch to add the dependency to the Kconfig
> > files.
>
> Here's an updated version of that patch that a) adds a KALLYMS dependency
> and b) adds a check for p->addr. Note that this check is outside the
> if (p->symbol_name) block so it also returns EINVAL if the user didn't
> specifcy either and address or a symbol name.
...
>
> Index: linux-2.6/kernel/kprobes.c
> ===================================================================
> --- linux-2.6.orig/kernel/kprobes.c 2006-08-09 13:44:39.000000000 +0200
> +++ linux-2.6/kernel/kprobes.c 2006-08-09 18:12:47.000000000 +0200
> @@ -37,6 +37,7 @@
> #include <linux/slab.h>
> #include <linux/module.h>
> #include <linux/moduleloader.h>
> +#include <linux/kallsyms.h>
> #include <asm-generic/sections.h>
> #include <asm/cacheflush.h>
> #include <asm/errno.h>
> @@ -45,6 +46,16 @@
> #define KPROBE_HASH_BITS 6
> #define KPROBE_TABLE_SIZE (1 << KPROBE_HASH_BITS)
>
> +
> +/*
> + * Some oddball architectures like 64bit powerpc have function descriptors
> + * so this must be overridable.
> + */
> +#ifndef kprobe_lookup_name
> +#define kprobe_lookup_name(name) \
> + ((kprobe_opcode_t *)(kallsyms_lookup_name(name))
This is missing a ')'. Updated patch below...
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
---
arch/i386/Kconfig | 2 +-
arch/ia64/Kconfig | 2 +-
arch/powerpc/Kconfig | 2 +-
arch/sparc64/Kconfig | 2 +-
arch/x86_64/Kconfig | 2 +-
include/asm-powerpc/kprobes.h | 3 +++
include/linux/kprobes.h | 6 ++++++
kernel/kallsyms.c | 1 -
kernel/kprobes.c | 26 ++++++++++++++++++++++++++
net/ipv4/tcp_probe.c | 6 ++++--
10 files changed, 44 insertions(+), 8 deletions(-)
Index: linux-2.6.18-rc4/arch/i386/Kconfig
===================================================================
--- linux-2.6.18-rc4.orig/arch/i386/Kconfig
+++ linux-2.6.18-rc4/arch/i386/Kconfig
@@ -1129,7 +1129,7 @@ source "arch/i386/oprofile/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
- depends on EXPERIMENTAL && MODULES
+ depends on KALLSYMS && EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
Index: linux-2.6.18-rc4/arch/ia64/Kconfig
===================================================================
--- linux-2.6.18-rc4.orig/arch/ia64/Kconfig
+++ linux-2.6.18-rc4/arch/ia64/Kconfig
@@ -510,7 +510,7 @@ source "arch/ia64/oprofile/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
- depends on EXPERIMENTAL && MODULES
+ depends on KALLSYMS && EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
Index: linux-2.6.18-rc4/arch/powerpc/Kconfig
===================================================================
--- linux-2.6.18-rc4.orig/arch/powerpc/Kconfig
+++ linux-2.6.18-rc4/arch/powerpc/Kconfig
@@ -1045,7 +1045,7 @@ source "arch/powerpc/oprofile/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
- depends on PPC64 && EXPERIMENTAL && MODULES
+ depends on PPC64 && KALLSYMS && EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
Index: linux-2.6.18-rc4/arch/sparc64/Kconfig
===================================================================
--- linux-2.6.18-rc4.orig/arch/sparc64/Kconfig
+++ linux-2.6.18-rc4/arch/sparc64/Kconfig
@@ -416,7 +416,7 @@ source "arch/sparc64/oprofile/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
- depends on EXPERIMENTAL && MODULES
+ depends on KALLSYMS && EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
Index: linux-2.6.18-rc4/arch/x86_64/Kconfig
===================================================================
--- linux-2.6.18-rc4.orig/arch/x86_64/Kconfig
+++ linux-2.6.18-rc4/arch/x86_64/Kconfig
@@ -639,7 +639,7 @@ source "arch/x86_64/oprofile/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
- depends on EXPERIMENTAL && MODULES
+ depends on KALLSYMS && EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
Index: linux-2.6.18-rc4/include/asm-powerpc/kprobes.h
===================================================================
--- linux-2.6.18-rc4.orig/include/asm-powerpc/kprobes.h
+++ linux-2.6.18-rc4/include/asm-powerpc/kprobes.h
@@ -44,6 +44,9 @@ typedef unsigned int kprobe_opcode_t;
#define IS_TDI(instr) (((instr) & 0xfc000000) == 0x08000000)
#define IS_TWI(instr) (((instr) & 0xfc000000) == 0x0c000000)
+#define kprobe_lookup_name(name) \
+ (*((kprobe_opcode_t **)kallsyms_lookup_name(name)))
+
#define JPROBE_ENTRY(pentry) (kprobe_opcode_t *)((func_descr_t *)pentry)
#define is_trap(instr) (IS_TW(instr) || IS_TD(instr) || \
Index: linux-2.6.18-rc4/include/linux/kprobes.h
===================================================================
--- linux-2.6.18-rc4.orig/include/linux/kprobes.h
+++ linux-2.6.18-rc4/include/linux/kprobes.h
@@ -77,6 +77,12 @@ struct kprobe {
/* location of the probe point */
kprobe_opcode_t *addr;
+ /* Allow user to indicate symbol name of the probe point */
+ char *symbol_name;
+
+ /* Offset into the symbol */
+ unsigned int offset;
+
/* Called before addr is executed. */
kprobe_pre_handler_t pre_handler;
Index: linux-2.6.18-rc4/kernel/kallsyms.c
===================================================================
--- linux-2.6.18-rc4.orig/kernel/kallsyms.c
+++ linux-2.6.18-rc4/kernel/kallsyms.c
@@ -154,7 +154,6 @@ unsigned long kallsyms_lookup_name(const
}
return module_kallsyms_lookup_name(name);
}
-EXPORT_SYMBOL_GPL(kallsyms_lookup_name);
/*
* Lookup an address
Index: linux-2.6.18-rc4/kernel/kprobes.c
===================================================================
--- linux-2.6.18-rc4.orig/kernel/kprobes.c
+++ linux-2.6.18-rc4/kernel/kprobes.c
@@ -37,6 +37,7 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/moduleloader.h>
+#include <linux/kallsyms.h>
#include <asm-generic/sections.h>
#include <asm/cacheflush.h>
#include <asm/errno.h>
@@ -45,6 +46,16 @@
#define KPROBE_HASH_BITS 6
#define KPROBE_TABLE_SIZE (1 << KPROBE_HASH_BITS)
+
+/*
+ * Some oddball architectures like 64bit powerpc have function descriptors
+ * so this must be overridable.
+ */
+#ifndef kprobe_lookup_name
+#define kprobe_lookup_name(name) \
+ ((kprobe_opcode_t *)(kallsyms_lookup_name(name)))
+#endif
+
static struct hlist_head kprobe_table[KPROBE_TABLE_SIZE];
static struct hlist_head kretprobe_inst_table[KPROBE_TABLE_SIZE];
static atomic_t kprobe_count;
@@ -447,6 +458,21 @@ static int __kprobes __register_kprobe(s
struct kprobe *old_p;
struct module *probed_mod;
+ /*
+ * If we have a symbol_name argument look it up,
+ * and add it to the address. That way the addr
+ * field can either be global or relative to a symbol.
+ */
+ if (p->symbol_name) {
+ if (p->addr)
+ return -EINVAL;
+ p->addr = kprobe_lookup_name(p->symbol_name);
+ }
+
+ if (!p->addr)
+ return -EINVAL;
+ p->addr += p->offset;
+
if ((!kernel_text_address((unsigned long) p->addr)) ||
in_kprobes_functions((unsigned long) p->addr))
return -EINVAL;
Index: linux-2.6.18-rc4/net/ipv4/tcp_probe.c
===================================================================
--- linux-2.6.18-rc4.orig/net/ipv4/tcp_probe.c
+++ linux-2.6.18-rc4/net/ipv4/tcp_probe.c
@@ -99,8 +99,10 @@ static int jtcp_sendmsg(struct kiocb *io
}
static struct jprobe tcp_send_probe = {
- .kp = { .addr = (kprobe_opcode_t *) &tcp_sendmsg, },
- .entry = (kprobe_opcode_t *) &jtcp_sendmsg,
+ .kp = {
+ .symbol_name = "tcp_sendmsg",
+ },
+ .entry = JPROBE_ENTRY(jtcp_sendmsg),
};
next prev parent reply other threads:[~2006-08-11 8:52 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-07 11:55 Ananth N Mavinakayanahalli
2006-08-07 12:00 ` [PATCH 2/3] Kprobes: Define retval helper Ananth N Mavinakayanahalli
2006-08-07 12:04 ` [PATCH 3/3] Kprobes: Update Documentation/kprobes.txt Ananth N Mavinakayanahalli
2006-08-08 16:27 ` Christoph Hellwig
2006-08-09 9:48 ` Ananth N Mavinakayanahalli
2006-08-09 10:24 ` Ananth N Mavinakayanahalli
2006-08-08 16:25 ` [PATCH 2/3] Kprobes: Define retval helper Christoph Hellwig
2006-08-09 4:37 ` Andi Kleen
2006-08-09 9:43 ` Ananth N Mavinakayanahalli
2006-08-09 9:45 ` Christoph Hellwig
2006-08-09 9:55 ` Andi Kleen
2006-08-09 10:19 ` Ananth N Mavinakayanahalli
2006-08-09 10:28 ` Martin Schwidefsky
2006-08-09 13:16 ` David Howells
2006-08-09 15:20 ` Ananth N Mavinakayanahalli
2006-08-07 12:06 ` [PATCH 1/3] Kprobes: Make kprobe modules more portable Ananth N Mavinakayanahalli
2006-08-08 16:24 ` Christoph Hellwig
2006-08-08 16:34 ` Stephen Hemminger
2006-08-08 16:40 ` Christoph Hellwig
2006-08-08 17:28 ` Paulo Marques
2006-08-08 17:32 ` Christoph Hellwig
2006-08-09 9:51 ` Ananth N Mavinakayanahalli
2006-08-09 16:01 ` David Smith
2006-08-09 16:10 ` Christoph Hellwig
2006-08-09 16:18 ` Christoph Hellwig
2006-08-10 14:10 ` Keshavamurthy Anil S
2006-08-16 13:20 ` Christoph Hellwig
2006-08-11 8:53 ` Ananth N Mavinakayanahalli [this message]
2006-08-10 6:18 ` Ananth N Mavinakayanahalli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060811085331.GA7816@in.ibm.com \
--to=ananth@in.ibm.com \
--cc=dsmith@redhat.com \
--cc=hch@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=shemminger@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome