Re: [PATCH] Kconfig powernow-k8 driver should depend on ACPI P-States driver

[Joshua Hoblitt <jhoblitt@ifa.hawaii.edu>]

[-- Attachment #1: Type: text/plain, Size: 2897 bytes --]

On Fri, May 18, 2007 at 12:01:08PM -0400, Dave Jones wrote:
> On Fri, May 18, 2007 at 12:09:38AM -0400, Ed Sweetman wrote:
[snip]
> still has unnecessary whitespace changes
[snip]
> and still wordwrapped.
> (also capitalise ACPI)

I haven't seen any more e-mail traffic on this topic so I'm assuming
that the ball has been dropped.  Please excuse me if an acceptable patch
has been submitted that I wasn't CC'd on. 

Here is cleaned up version of Ed's patch that I believe addresses Dave's
stylistic concerns applies the relevant changes to both x86 & x86_64.

Signed-off-by: Joshua Hoblitt <jhoblitt@ifa.hawaii.edu>
--
 i386/kernel/cpu/cpufreq/Kconfig |   13 ++++++++++---
 x86_64/kernel/cpufreq/Kconfig   |   13 ++++++++++---
 2 files changed, 20 insertions(+), 6 deletions(-)

diff -Nurp linux-2.6.22-rc1-mm1.orig/arch/i386/kernel/cpu/cpufreq/Kconfig linux-2.6.22-rc1-mm1/arch/i386/kernel/cpu/cpufreq/Kconfig
--- linux-2.6.22-rc1-mm1.orig/arch/i386/kernel/cpu/cpufreq/Kconfig	2007-04-27 11:49:26.000000000 -1000
+++ linux-2.6.22-rc1-mm1/arch/i386/kernel/cpu/cpufreq/Kconfig	2007-05-21 16:20:47.000000000 -1000
@@ -90,10 +90,17 @@ config X86_POWERNOW_K8
 	  If in doubt, say N.
 
 config X86_POWERNOW_K8_ACPI
-	bool
-	depends on X86_POWERNOW_K8 && ACPI_PROCESSOR
-	depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
+	bool "ACPI Support"
+	select ACPI_PROCESSOR
+	depends on X86_POWERNOW_K8
 	default y
+	help
+	  This provides access to the K8s Processor Performance States via ACPI.
+	  This driver is probably required for CPUFreq to work with multi-socket and
+	  SMP systems.  It is not required on at least some single-socket yet
+	  multi-core systems, even if SMP is enabled.
+
+	  It is safe to say Y here.
 
 config X86_GX_SUSPMOD
 	tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
diff -Nurp linux-2.6.22-rc1-mm1.orig/arch/x86_64/kernel/cpufreq/Kconfig linux-2.6.22-rc1-mm1/arch/x86_64/kernel/cpufreq/Kconfig
--- linux-2.6.22-rc1-mm1.orig/arch/x86_64/kernel/cpufreq/Kconfig	2007-05-21 16:11:16.000000000 -1000
+++ linux-2.6.22-rc1-mm1/arch/x86_64/kernel/cpufreq/Kconfig	2007-05-21 16:29:11.000000000 -1000
@@ -24,10 +24,17 @@ config X86_POWERNOW_K8
 	  If in doubt, say N.
 
 config X86_POWERNOW_K8_ACPI
-	bool
-	depends on X86_POWERNOW_K8 && ACPI_PROCESSOR
-	depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
+	bool "ACPI Support"
+	select ACPI_PROCESSOR
+	depends on X86_POWERNOW_K8
 	default y
+	help
+	  This provides access to the K8s Processor Performance States via ACPI.
+	  This driver is probably required for CPUFreq to work with multi-socket and
+	  SMP systems.  It is not required on at least some single-socket yet
+	  multi-core systems, even if SMP is enabled.
+	
+	  It is safe to say Y here.
 
 config X86_SPEEDSTEP_CENTRINO
 	tristate "Intel Enhanced SpeedStep (deprecated)"

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]