fglrx

fglrx

[Justin Mattock]

Hello;  bob knight
thank you again for helping me out with fglrx, The build did worked
this time, I received an invalid lvalue with cap_t, but was able to
carry through with just using an old capability.h file.
As for the change_page_attr (I dont think I would of ever gotten that)
nice work; here is what dmesg says:

[    8.823442] Symbol init_mm is marked as UNUSED, however this module
is using it.
[    8.823446] This symbol will go away in the future.
[    8.823448] Please evalute if this is the right api to use, and if
it really is, submit a report the linux kernel mailinglist together
with submitting your code for inclusion.
[    8.842105] [fglrx] Maximum main memory to use for locked dma
buffers: 913 MBytes.
[    8.842133] [fglrx] ASYNCIO init succeed!
[    8.843985] [fglrx] PAT is enabled successfully!
[    8.844006] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[   54.527129] [fglrx] Reserve Block - 0 offset =  0X7ffb000 length = 0X5000
[   54.527135] [fglrx] Reserve Block - 1 offset =  0X0 length = 0X1000000
[   54.527138] [fglrx] Reserve Block - 2 offset =  0X7fbb000 length = 0X40000
[   54.785599] [fglrx] interrupt source 20008000 successfully enabled
[   54.785599] [fglrx] enable ID = 0x00000008
[   54.785599] [fglrx] Receive enable interrupt message with
irqEnableMask: 20008000
[   54.785599] [fglrx] interrupt source 10000000 successfully enabled
[   54.785599] [fglrx] enable ID = 0x00000009
[   54.785599] [fglrx] Receive enable interrupt message with
irqEnableMask: 10000000

I looked on google but didnt find much about init_mm
I'll paste what you gave me on the mactel site so anybody who needs
fglrx on 2.6.25 can get it working to somewhat of an extent.
regards;


-- 
Justin P. Mattock

Re: fglrx

[Christoph Hellwig]

On Thu, Mar 20, 2008 at 11:00:21PM +0000, Justin Mattock wrote:
> Hello;  bob knight
> thank you again for helping me out with fglrx, The build did worked
> this time, I received an invalid lvalue with cap_t, but was able to
> carry through with just using an old capability.h file.
> As for the change_page_attr (I dont think I would of ever gotten that)
> nice work; here is what dmesg says:

Please complain to ati about your binary only crap or even better
support open source development by switching to the free xorg 'ati' driver.

fglrx

[Justin Mattock]

Hello; I appoligize.

-- 
Justin P. Mattock

Re: fglrx

[Justin Mattock]

Hello;
O.K., sorry for the confusion. I will keep my messages in the context
of kernel-development only.
As for reply-to-all I will do that also(hopefully I do this correctly).
regards

        Justin P. Mattock

On Fri, Mar 21, 2008 at 4:46 PM, Randy Dunlap <rdunlap@xenotime.net> wrote:
> On Fri, 21 Mar 2008 16:33:24 +0000 Justin Mattock wrote:
>
>  > Hello; I appoligize.
>
>  Hello;
>  Could you also use reply-to-all and threaded email messages
>  instead of a new message each time?
>  with a decent subject line also?
>
>  Thanks.
>
>  ---
>  ~Randy
>



-- 
Justin P. Mattock

fglrx

[Justin Mattock]

Hello; fair enough, I did ask ati about what I should do, but there
wasn't much help. Overall its not pretty, but If you are impatient for
ati to come out with an update then this should get you going(for 3D).
The problem I see is, SELinux is going out of whack due to fglrx
wanting a cap_t effective vector.  So on the secure side I probably
wont use fglrx until there is support for the proper capability.
or take you're approach and look at the open ati driver.


-- 
Justin P. Mattock

Re: fglrx

[Adrian Bunk]

On Fri, Mar 21, 2008 at 04:25:00PM +0000, Justin Mattock wrote:
> Hello; fair enough, I did ask ati about what I should do, but there
> wasn't much help. Overall its not pretty, but If you are impatient for
> ati to come out with an update then this should get you going(for 3D).
> The problem I see is, SELinux is going out of whack due to fglrx
> wanting a cap_t effective vector.  So on the secure side I probably
> wont use fglrx until there is support for the proper capability.
> or take you're approach and look at the open ati driver.

Please stop discussing binary-only drivers on linux-kernel.

That's 100% off-topic here.

> Justin P. Mattock

Thanks
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed

Re: fglrx

[Gerhard Mack]

On Fri, 21 Mar 2008, Justin Mattock wrote:

> Hello; fair enough, I did ask ati about what I should do, but there
> wasn't much help. Overall its not pretty, but If you are impatient for
> ati to come out with an update then this should get you going(for 3D).
> The problem I see is, SELinux is going out of whack due to fglrx
> wanting a cap_t effective vector.  So on the secure side I probably
> wont use fglrx until there is support for the proper capability.
> or take you're approach and look at the open ati driver.
> 

The only fix is to get rid of the ATI video card.  I've had this problem 
in the past with their stuff and just ended up beating my head against a 
wall.  It's not worth it .. trust me.  The fglrx driver has been crap for 
over two years and the open sourced versions are slow leaving me to give 
up and just buy something else.


Gerhard


--
Gerhard Mack

gmack@innerfire.net

<>< As a computer I find your faith in technology amusing.

Re: fglrx

[Alexey Dobriyan]

On Sat, Mar 22, 2008 at 04:44:04PM -0400, Gerhard Mack wrote:
>                                        The fglrx driver has been crap for 
> over two years and the open sourced versions are slow leaving me to give 
> up and just buy something else.

Slow with what exactly?

Re: fglrx

[Gerhard Mack]

On Sun, 23 Mar 2008, Alexey Dobriyan wrote:

> On Sat, Mar 22, 2008 at 04:44:04PM -0400, Gerhard Mack wrote:
> >                                        The fglrx driver has been crap for 
> > over two years and the open sourced versions are slow leaving me to give 
> > up and just buy something else.
> 
> Slow with what exactly?

Slow with anything needing 3d accel ??

	Gerhard
 

--
Gerhard Mack

gmack@innerfire.net

<>< As a computer I find your faith in technology amusing.

fglrx

[Justin Mattock]

Hello;
Thank you very much for the diffs on fglrx to get it working.


-- 
Justin P. Mattock