mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Cyrill Gorcunov <gorcunov@gmail.com>
To: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
	"H. Peter Anvin" <hpa@zytor.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] x86: add show_lapic=
Date: Sun, 27 Sep 2009 12:06:05 +0400	[thread overview]
Message-ID: <20090927080605.GA4984@lenovo> (raw)
In-Reply-To: <4ABF0DE0.1030400@kernel.org>

[Yinghai Lu - Sun, Sep 27, 2009 at 12:01:52AM -0700]
| 
| so could use that together with apci=debug to print less cpu apic.
| 
| otherwise for system have more cpus will take a while
| 
| also move apic_verbosity check to print_all_ICs
| 
| Signed-off-by: Yinghai Lu <yinghai@kernel.org>
| 
| ---
|  arch/x86/kernel/apic/io_apic.c |   42 ++++++++++++++++++++++++++---------------
|  1 file changed, 27 insertions(+), 15 deletions(-)
...

Hi Yinghai, good idea!

I've tuned your patch a bit together with changelog.

1) show_lapic=1 by default does change current kernel behaviour
   so it should be set to max cpu available.
2) show_lapic contains the max number of lapics being printed
   so we need to count them instead of plain comparation with
   cpu number, as a result I've changed print_local_APICs. Or
   you meant _exactly_ cpuid number? In meaning like
   show_lapic=max_cpuid. Hmm?

Someting like this perhaps?

(I keep you SOB since I've touched a few lines only)

How do you think?
---
[PATCH -tip] x86,apic: introduce show_lapic setup option

In case if a system has a large number of cpus printing apics
contents may consume a long time period. So to control it
we introduce "show_lapic" setup option which allow us to limit
the number of APICs being dumped.

Also move apic_verbosity check up so helpers routine do not
need to check it.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
---
 arch/x86/kernel/apic/io_apic.c |   43 ++++++++++++++++++++++++++---------------
 1 file changed, 28 insertions(+), 15 deletions(-)

Index: linux-2.6.git/arch/x86/kernel/apic/io_apic.c
=====================================================================
--- linux-2.6.git.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6.git/arch/x86/kernel/apic/io_apic.c
@@ -1599,9 +1599,6 @@ __apicdebuginit(void) print_IO_APIC(void
 	struct irq_desc *desc;
 	unsigned int irq;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
 	for (i = 0; i < nr_ioapics; i++)
 		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
@@ -1708,9 +1705,6 @@ __apicdebuginit(void) print_APIC_field(i
 {
 	int i;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG);
 
 	for (i = 0; i < 8; i++)
@@ -1724,9 +1718,6 @@ __apicdebuginit(void) print_local_APIC(v
 	unsigned int i, v, ver, maxlvt;
 	u64 icr;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
 	v = apic_read(APIC_ID);
@@ -1824,13 +1815,19 @@ __apicdebuginit(void) print_local_APIC(v
 	printk("\n");
 }
 
-__apicdebuginit(void) print_all_local_APICs(void)
+__apicdebuginit(void) print_local_APICs(int napics)
 {
 	int cpu;
 
+	if (!napics)
+		return;
+
 	preempt_disable();
-	for_each_online_cpu(cpu)
+	for_each_online_cpu(cpu) {
+		if (!napics--)
+			break;
 		smp_call_function_single(cpu, print_local_APIC, NULL, 1);
+	}
 	preempt_enable();
 }
 
@@ -1839,7 +1836,7 @@ __apicdebuginit(void) print_PIC(void)
 	unsigned int v;
 	unsigned long flags;
 
-	if (apic_verbosity == APIC_QUIET || !nr_legacy_irqs)
+	if (!nr_legacy_irqs)
 		return;
 
 	printk(KERN_DEBUG "\nprinting PIC contents\n");
@@ -1866,21 +1863,37 @@ __apicdebuginit(void) print_PIC(void)
 	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
 }
 
-__apicdebuginit(int) print_all_ICs(void)
+static int __initdata show_lapic = NR_CPUS;
+static __init int setup_show_lapic(char *arg)
 {
+	int num;
+
+	get_option(&arg, &num);
+	if (num >= 0)
+		show_lapic = num;
+
+	return 1;
+}
+__setup("show_lapic=", setup_show_lapic);
+
+__apicdebuginit(int) print_ICs(void)
+{
+	if (apic_verbosity == APIC_QUIET)
+		return 0;
+
 	print_PIC();
 
 	/* don't print out if apic is not there */
 	if (!cpu_has_apic && !apic_from_smp_config())
 		return 0;
 
-	print_all_local_APICs();
+	print_local_APICs(show_lapic);
 	print_IO_APIC();
 
 	return 0;
 }
 
-fs_initcall(print_all_ICs);
+fs_initcall(print_ICs);
 
 
 /* Where if anywhere is the i8259 connect in external int mode */

  reply	other threads:[~2009-09-27  8:06 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-09-27  7:01 Yinghai Lu
2009-09-27  8:06 ` Cyrill Gorcunov [this message]
2009-09-27  8:29   ` Yinghai Lu
2009-09-27  8:54     ` Cyrill Gorcunov
2009-09-27 10:28       ` Cyrill Gorcunov
2009-09-27 14:40         ` Cyrill Gorcunov
2009-09-27 17:42           ` Cyrill Gorcunov
2009-09-28 16:07             ` Cyrill Gorcunov
2009-09-28 17:46               ` Yinghai Lu
2009-09-28 18:02                 ` Cyrill Gorcunov
2009-09-30 15:26                   ` Cyrill Gorcunov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090927080605.GA4984@lenovo \
    --to=gorcunov@gmail.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=tglx@linutronix.de \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®