mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jan Kara <jack@suse.cz>
To: Rik van Riel <riel@redhat.com>
Cc: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
	esandeen@redhat.com, jmoyer@redhat.com,
	linux-fsdevel@vger.kernel.org
Subject: Re: [PATCH] clear PageError bit in msync & fsync
Date: Tue, 9 Nov 2010 22:39:40 +0100	[thread overview]
Message-ID: <20101109213940.GG4936@quack.suse.cz> (raw)
In-Reply-To: <20101109114422.3918e7f6@annuminas.surriel.com>

On Tue 09-11-10 11:44:22, Rik van Riel wrote:
> Temporary IO failures, eg. due to loss of both multipath paths, can
> permanently leave the PageError bit set on a page, resulting in
> msync or fsync returning -EIO over and over again, even if IO is
> now getting to the disk correctly.
> 
> We already clear the AS_ENOSPC and AS_IO bits in mapping->flags in
> the filemap_fdatawait_range function.  Also clearing the PageError
> bit on the page allows subsequent msync or fsync calls on this file
> to return without an error, if the subsequent IO succeeds.
> 
> Unfortunately data written out in the msync or fsync call that
> returned -EIO can still get lost, because the page dirty bit appears
> to not get restored on IO error.  However, the alternative could be
> potentially all of memory filling up with uncleanable dirty pages,
> hanging the system, so there is no nice choice here...
> 
> Signed-off-by: Rik van Riel <riel@redhat.com>
  The patch looks OK to me so feel free to add
Acked-by: Jan Kara <jack@suse.cz>

But I'd like to talk about what you write in the last paragraph because
that is bugging me for some time as well and I believe we *should* find a
reasonable answer to that.

As you write above, it's not a big deal to keep page with IO error dirty
but we have to come up with a reasonable way for kernel to eventually get
rid of dirty pages it is unable to write. I think it is possible to handle
without any in-kernel magic. The most common case is when the device just
does not respond for some time - all processes writing to the device would
soon block in balance_dirty_pages() so they don't bring the kernel OOM.
Then we just need to provide for userspace a way to discard all pages
backed by given device including dirty pages - that way userspace could
tell, when there's no way the device is going back and processes would get
unblocked and start getting EIO. Only userspace would have to be careful
not to get blocked in balance_dirty_pages() while trying to prune the
cache.

I think this would be good enough, what do you think?

								Honza

> diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
> index 5f38c46..4805fde 100644
> --- a/include/linux/page-flags.h
> +++ b/include/linux/page-flags.h
> @@ -198,7 +198,7 @@ static inline int __TestClearPage##uname(struct page *page) { return 0; }
>  struct page;	/* forward declaration */
>  
>  TESTPAGEFLAG(Locked, locked) TESTSETFLAG(Locked, locked)
> -PAGEFLAG(Error, error)
> +PAGEFLAG(Error, error) TESTCLEARFLAG(Error, error)
>  PAGEFLAG(Referenced, referenced) TESTCLEARFLAG(Referenced, referenced)
>  PAGEFLAG(Dirty, dirty) TESTSCFLAG(Dirty, dirty) __CLEARPAGEFLAG(Dirty, dirty)
>  PAGEFLAG(LRU, lru) __CLEARPAGEFLAG(LRU, lru)
> diff --git a/mm/filemap.c b/mm/filemap.c
> index 61ba5e4..ba27b83 100644
> --- a/mm/filemap.c
> +++ b/mm/filemap.c
> @@ -296,7 +296,7 @@ int filemap_fdatawait_range(struct address_space *mapping, loff_t start_byte,
>  				continue;
>  
>  			wait_on_page_writeback(page);
> -			if (PageError(page))
> +			if (TestClearPageError(page))
>  				ret = -EIO;
>  		}
>  		pagevec_release(&pvec);
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
-- 
Jan Kara <jack@suse.cz>
SUSE Labs, CR

      parent reply	other threads:[~2010-11-09 21:39 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-09 16:44 Rik van Riel
2010-11-09 18:09 ` Valerie Aurora
2010-11-09 19:21 ` Jeff Layton
2010-11-09 19:33   ` Rik van Riel
2010-11-09 21:07     ` Ted Ts'o
2010-11-09 21:15       ` Rik van Riel
2010-11-09 21:41         ` Andrew Morton
2010-11-12  4:36           ` Rik van Riel
2010-11-12 15:52             ` Jeff Layton
2010-11-12 17:04               ` Rik van Riel
2010-11-09 21:44         ` Jan Kara
2010-11-11 16:31       ` Rik van Riel
2010-11-09 21:21     ` Zan Lynx
2010-11-09 21:24       ` Rik van Riel
2010-11-12 20:51         ` Eric Sandeen
2010-11-12 21:36           ` Jeff Layton
2010-11-09 21:39 ` Jan Kara [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20101109213940.GG4936@quack.suse.cz \
    --to=jack@suse.cz \
    --cc=akpm@linux-foundation.org \
    --cc=esandeen@redhat.com \
    --cc=jmoyer@redhat.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=riel@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®