From: Lee Jones <lee.jones@linaro.org>
To: Julia Cartwright <julia@ni.com>
Cc: linux-kernel@vger.kernel.org, Thomas Gleixner <tglx@linutronix.de>
Subject: Re: [PATCH 14/19] mfd: t7l66xb: make use of raw_spinlock variants
Date: Wed, 15 Mar 2017 11:17:44 +0000 [thread overview]
Message-ID: <20170315111744.nb67cjfkjwtrjvcf@dell> (raw)
In-Reply-To: <72bbb1d0c4a9ae4c4f6d9dfadfdf870a03c522e0.1489015238.git.julia@ni.com>
On Thu, 09 Mar 2017, Julia Cartwright wrote:
> The t7l66xb mfd driver currently implements an irq_chip for handling
> interrupts; due to how irq_chip handling is done, it's necessary for the
> irq_chip methods to be invoked from hardirq context, even on a a
> real-time kernel. Because the spinlock_t type becomes a "sleeping"
> spinlock w/ RT kernels, it is not suitable to be used with irq_chips.
>
> A quick audit of the operations under the lock reveal that they do only
> minimal, bounded work, and are therefore safe to do under a raw spinlock.
>
> Signed-off-by: Julia Cartwright <julia@ni.com>
> ---
> drivers/mfd/t7l66xb.c | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
Can the 3 MFD patches in this set be applied on their own, or is there
a dependency somewhere else in the set?
NB: It's normally a good idea to send the set to everyone, or at the
very least, the 00/00th patch.
> diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
> index 94bd89cb1f06..22c811396edc 100644
> --- a/drivers/mfd/t7l66xb.c
> +++ b/drivers/mfd/t7l66xb.c
> @@ -69,7 +69,7 @@ static const struct resource t7l66xb_mmc_resources[] = {
> struct t7l66xb {
> void __iomem *scr;
> /* Lock to protect registers requiring read/modify/write ops. */
> - spinlock_t lock;
> + raw_spinlock_t lock;
>
> struct resource rscr;
> struct clk *clk48m;
> @@ -89,13 +89,13 @@ static int t7l66xb_mmc_enable(struct platform_device *mmc)
>
> clk_prepare_enable(t7l66xb->clk32k);
>
> - spin_lock_irqsave(&t7l66xb->lock, flags);
> + raw_spin_lock_irqsave(&t7l66xb->lock, flags);
>
> dev_ctl = tmio_ioread8(t7l66xb->scr + SCR_DEV_CTL);
> dev_ctl |= SCR_DEV_CTL_MMC;
> tmio_iowrite8(dev_ctl, t7l66xb->scr + SCR_DEV_CTL);
>
> - spin_unlock_irqrestore(&t7l66xb->lock, flags);
> + raw_spin_unlock_irqrestore(&t7l66xb->lock, flags);
>
> tmio_core_mmc_enable(t7l66xb->scr + 0x200, 0,
> t7l66xb_mmc_resources[0].start & 0xfffe);
> @@ -110,13 +110,13 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc)
> unsigned long flags;
> u8 dev_ctl;
>
> - spin_lock_irqsave(&t7l66xb->lock, flags);
> + raw_spin_lock_irqsave(&t7l66xb->lock, flags);
>
> dev_ctl = tmio_ioread8(t7l66xb->scr + SCR_DEV_CTL);
> dev_ctl &= ~SCR_DEV_CTL_MMC;
> tmio_iowrite8(dev_ctl, t7l66xb->scr + SCR_DEV_CTL);
>
> - spin_unlock_irqrestore(&t7l66xb->lock, flags);
> + raw_spin_unlock_irqrestore(&t7l66xb->lock, flags);
>
> clk_disable_unprepare(t7l66xb->clk32k);
>
> @@ -206,11 +206,11 @@ static void t7l66xb_irq_mask(struct irq_data *data)
> unsigned long flags;
> u8 imr;
>
> - spin_lock_irqsave(&t7l66xb->lock, flags);
> + raw_spin_lock_irqsave(&t7l66xb->lock, flags);
> imr = tmio_ioread8(t7l66xb->scr + SCR_IMR);
> imr |= 1 << (data->irq - t7l66xb->irq_base);
> tmio_iowrite8(imr, t7l66xb->scr + SCR_IMR);
> - spin_unlock_irqrestore(&t7l66xb->lock, flags);
> + raw_spin_unlock_irqrestore(&t7l66xb->lock, flags);
> }
>
> static void t7l66xb_irq_unmask(struct irq_data *data)
> @@ -219,11 +219,11 @@ static void t7l66xb_irq_unmask(struct irq_data *data)
> unsigned long flags;
> u8 imr;
>
> - spin_lock_irqsave(&t7l66xb->lock, flags);
> + raw_spin_lock_irqsave(&t7l66xb->lock, flags);
> imr = tmio_ioread8(t7l66xb->scr + SCR_IMR);
> imr &= ~(1 << (data->irq - t7l66xb->irq_base));
> tmio_iowrite8(imr, t7l66xb->scr + SCR_IMR);
> - spin_unlock_irqrestore(&t7l66xb->lock, flags);
> + raw_spin_unlock_irqrestore(&t7l66xb->lock, flags);
> }
>
> static struct irq_chip t7l66xb_chip = {
> @@ -321,7 +321,7 @@ static int t7l66xb_probe(struct platform_device *dev)
> if (!t7l66xb)
> return -ENOMEM;
>
> - spin_lock_init(&t7l66xb->lock);
> + raw_spin_lock_init(&t7l66xb->lock);
>
> platform_set_drvdata(dev, t7l66xb);
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2017-03-15 11:19 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-09 16:21 [PATCH 00/19] fixup usage of non-raw spinlocks in irqchips Julia Cartwright
2017-03-09 16:21 ` [PATCH 01/19] Coccinelle: locks: identify callers of spin_lock{,_irq,_irqsave}() in irqchip implementations Julia Cartwright
2017-03-09 20:15 ` Julia Lawall
2017-03-09 21:37 ` Julia Cartwright
2017-03-09 16:21 ` [PATCH 02/19] gpio: altera: make use of raw_spinlock variants Julia Cartwright
2017-03-15 9:53 ` Linus Walleij
2017-03-09 16:21 ` [PATCH 03/19] alpha: marvel: " Julia Cartwright
2017-03-12 2:58 ` kbuild test robot
2017-03-09 16:21 ` [PATCH 04/19] powerpc: mpc52xx_gpt: " Julia Cartwright
2017-03-09 16:21 ` [PATCH 05/19] gpio: 104-dio-48e: " Julia Cartwright
2017-03-09 18:35 ` William Breathitt Gray
2017-03-15 9:54 ` Linus Walleij
2017-03-09 16:21 ` [PATCH 06/19] gpio: ath79: " Julia Cartwright
2017-03-13 19:51 ` Alban
2017-03-15 9:59 ` Linus Walleij
2017-03-09 16:21 ` [PATCH 07/19] gpio: bcm-kona: " Julia Cartwright
2017-03-10 17:28 ` Ray Jui
2017-03-10 19:35 ` Julia Cartwright
2017-03-15 9:57 ` Linus Walleij
2017-03-15 9:56 ` Linus Walleij
2017-03-09 16:21 ` [PATCH 08/19] gpio: etraxfs: " Julia Cartwright
2017-03-15 10:00 ` Linus Walleij
2017-03-09 16:21 ` [PATCH 09/19] gpio: pl061: " Julia Cartwright
2017-03-15 10:01 ` Linus Walleij
2017-03-09 16:21 ` [PATCH 10/19] gpio: ws16c48: " Julia Cartwright
2017-03-09 18:36 ` William Breathitt Gray
2017-03-15 10:02 ` Linus Walleij
2017-03-09 16:21 ` [PATCH 11/19] gpio: zx: " Julia Cartwright
2017-03-15 10:03 ` Linus Walleij
2017-03-09 16:21 ` [PATCH 12/19] i2c: mux: pca954x: " Julia Cartwright
2017-03-16 19:38 ` Peter Rosin
2017-03-09 16:22 ` [PATCH 13/19] mfd: asic3: " Julia Cartwright
2017-03-09 16:22 ` [PATCH 14/19] mfd: t7l66xb: " Julia Cartwright
2017-03-15 11:17 ` Lee Jones [this message]
2017-03-15 19:07 ` Julia Cartwright
2017-03-16 9:22 ` Lee Jones
2017-03-09 16:22 ` [PATCH 15/19] mfd: tc6393xb: " Julia Cartwright
2017-03-09 16:22 ` [PATCH 16/19] pinctrl: bcm: " Julia Cartwright
2017-03-15 10:11 ` Linus Walleij
2017-03-09 16:22 ` [PATCH 17/19] pinctrl: amd: " Julia Cartwright
2017-03-15 10:12 ` Linus Walleij
2017-03-09 16:22 ` [PATCH 18/19] pinctrl: sirf: atlas7: " Julia Cartwright
2017-03-15 10:13 ` Linus Walleij
2017-03-09 16:22 ` [PATCH 19/19] pinctrl: sunxi: " Julia Cartwright
2017-03-15 10:14 ` Linus Walleij
2017-03-15 9:51 ` [PATCH 00/19] fixup usage of non-raw spinlocks in irqchips Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170315111744.nb67cjfkjwtrjvcf@dell \
--to=lee.jones@linaro.org \
--cc=julia@ni.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®