mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Niklas Cassel <niklas.cassel@axis.com>
To: Niklas Cassel <niklass@axis.com>,
	Jesper Nilsson <jespern@axis.com>,
	Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-arm-kernel@axis.com, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 11/17] PCI: dwc: artpec6: Use BIT and GENMASK macros
Date: Tue, 31 Oct 2017 23:39:29 +0100	[thread overview]
Message-ID: <20171031223936.27549-12-niklas.cassel@axis.com> (raw)
In-Reply-To: <20171031223936.27549-1-niklas.cassel@axis.com>

This greatly improves readability.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
V3:
* No change.

 drivers/pci/dwc/pcie-artpec6.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/pci/dwc/pcie-artpec6.c b/drivers/pci/dwc/pcie-artpec6.c
index 4b8ef266dc2f..18075e0fab80 100644
--- a/drivers/pci/dwc/pcie-artpec6.c
+++ b/drivers/pci/dwc/pcie-artpec6.c
@@ -39,28 +39,28 @@ struct artpec6_pcie {
 
 /* ARTPEC-6 specific registers */
 #define PCIECFG				0x18
-#define  PCIECFG_DBG_OEN		(1 << 24)
-#define  PCIECFG_CORE_RESET_REQ		(1 << 21)
-#define  PCIECFG_LTSSM_ENABLE		(1 << 20)
-#define  PCIECFG_CLKREQ_B		(1 << 11)
-#define  PCIECFG_REFCLK_ENABLE		(1 << 10)
-#define  PCIECFG_PLL_ENABLE		(1 << 9)
-#define  PCIECFG_PCLK_ENABLE		(1 << 8)
-#define  PCIECFG_RISRCREN		(1 << 4)
-#define  PCIECFG_MODE_TX_DRV_EN		(1 << 3)
-#define  PCIECFG_CISRREN		(1 << 2)
-#define  PCIECFG_MACRO_ENABLE		(1 << 0)
+#define  PCIECFG_DBG_OEN		BIT(24)
+#define  PCIECFG_CORE_RESET_REQ		BIT(21)
+#define  PCIECFG_LTSSM_ENABLE		BIT(20)
+#define  PCIECFG_CLKREQ_B		BIT(11)
+#define  PCIECFG_REFCLK_ENABLE		BIT(10)
+#define  PCIECFG_PLL_ENABLE		BIT(9)
+#define  PCIECFG_PCLK_ENABLE		BIT(8)
+#define  PCIECFG_RISRCREN		BIT(4)
+#define  PCIECFG_MODE_TX_DRV_EN		BIT(3)
+#define  PCIECFG_CISRREN		BIT(2)
+#define  PCIECFG_MACRO_ENABLE		BIT(0)
 
 #define NOCCFG				0x40
-#define NOCCFG_ENABLE_CLK_PCIE		(1 << 4)
-#define NOCCFG_POWER_PCIE_IDLEACK	(1 << 3)
-#define NOCCFG_POWER_PCIE_IDLE		(1 << 2)
-#define NOCCFG_POWER_PCIE_IDLEREQ	(1 << 1)
+#define  NOCCFG_ENABLE_CLK_PCIE		BIT(4)
+#define  NOCCFG_POWER_PCIE_IDLEACK	BIT(3)
+#define  NOCCFG_POWER_PCIE_IDLE		BIT(2)
+#define  NOCCFG_POWER_PCIE_IDLEREQ	BIT(1)
 
 #define PHY_STATUS			0x118
-#define PHY_COSPLLLOCK			(1 << 0)
+#define  PHY_COSPLLLOCK			BIT(0)
 
-#define ARTPEC6_CPU_TO_BUS_ADDR		0x0fffffff
+#define ARTPEC6_CPU_TO_BUS_ADDR		GENMASK(27, 0)
 
 static u32 artpec6_pcie_readl(struct artpec6_pcie *artpec6_pcie, u32 offset)
 {
-- 
2.14.2

  parent reply	other threads:[~2017-10-31 22:45 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-31 22:39 [PATCH v3 00/17] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 01/17] PCI: dwc: Use DMA-API for allocating MSI data Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 02/17] PCI: designware-ep: dw_pcie_ep_set_msi() should only set MMC bits Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 03/17] PCI: designware-ep: Read-only registers need DBI_RO_WR_EN to be writable Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 04/17] PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 05/17] PCI: designware-ep: Remove static keyword from dw_pcie_ep_reset_bar() Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 06/17] PCI: designware-ep: Add generic function for raising MSI irq Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 07/17] PCI: dwc: dra7xx: Refactor Kconfig and Makefile handling for host/ep mode Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 08/17] PCI: dwc: dra7xx: Assign pp->ops in dra7xx_add_pcie_port() rather than in probe Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 09/17] PCI: dwc: dra7xx: Add ifdefs for host/ep specific code Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 10/17] PCI: dwc: artpec6: Remove unused defines Niklas Cassel
2017-10-31 22:39 ` Niklas Cassel [this message]
2017-10-31 22:39 ` [PATCH v3 12/17] PCI: dwc: artpec6: Split artpec6_pcie_establish_link to smaller functions Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 13/17] bindings: PCI: artpec: Add support for endpoint mode Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 14/17] PCI: dwc: artpec6: " Niklas Cassel
2017-11-02  9:13   ` Arnd Bergmann
2017-11-03  9:56     ` Niklas Cassel
2017-11-03 10:23       ` Arnd Bergmann
2017-11-03 14:16         ` Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 15/17] PCI: dwc: Make cpu_addr_fixup take struct dw_pcie as argument Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 16/17] bindings: PCI: artpec: Add support for the ARTPEC-7 SoC Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 17/17] PCI: dwc: artpec6: " Niklas Cassel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171031223936.27549-12-niklas.cassel@axis.com \
    --to=niklas.cassel@axis.com \
    --cc=bhelgaas@google.com \
    --cc=jespern@axis.com \
    --cc=linux-arm-kernel@axis.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=niklass@axis.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome