mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Niklas Cassel <niklas.cassel@axis.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Niklas Cassel <niklass@axis.com>,
	Jesper Nilsson <jespern@axis.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	Joao Pinto <Joao.Pinto@synopsys.com>
Cc: linux-omap@vger.kernel.org, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-arm-kernel@axis.com
Subject: [PATCH v3 15/17] PCI: dwc: Make cpu_addr_fixup take struct dw_pcie as argument
Date: Tue, 31 Oct 2017 23:39:33 +0100	[thread overview]
Message-ID: <20171031223936.27549-16-niklas.cassel@axis.com> (raw)
In-Reply-To: <20171031223936.27549-1-niklas.cassel@axis.com>

There is no need to hard code the cpu to bus address fixup mask.
The PCIe controller has a global address on the AXI bus, however,
from the perspective of the PCIe controller, its base starts at 0x0,
so the local address is 0x0. To get the bus address, simply subtract
the global address from the cpu address. The global address is taken
from device tree.

Also for ARTPEC-7, hard coding the cpu to bus address fixup mask is
not possible, since it uses a High Address Bits Look Up Table, which
means that it can, at runtime, map the PCIe window to an arbitrary
address in the 32-bit address space.

This also fixes a bug for ARTPEC-6, where the cpu to bus address
fixup mask previously was off by one (GENMASK(27, 0), rather than
GENMASK(28, 0)), which is another reason why the it is a good idea
to calculate the mask by using values from device tree.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
V3:
* No change.

 drivers/pci/dwc/pci-dra7xx.c      |  2 +-
 drivers/pci/dwc/pcie-artpec6.c    | 18 ++++++++++++++----
 drivers/pci/dwc/pcie-designware.c |  2 +-
 drivers/pci/dwc/pcie-designware.h |  2 +-
 4 files changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index b4c204aa932a..4d5cff76e64a 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -109,7 +109,7 @@ static inline void dra7xx_pcie_writel(struct dra7xx_pcie *pcie, u32 offset,
 	writel(value, pcie->base + offset);
 }
 
-static u64 dra7xx_pcie_cpu_addr_fixup(u64 pci_addr)
+static u64 dra7xx_pcie_cpu_addr_fixup(struct dw_pcie *pci, u64 pci_addr)
 {
 	return pci_addr & DRA7XX_CPU_TO_BUS_ADDR;
 }
diff --git a/drivers/pci/dwc/pcie-artpec6.c b/drivers/pci/dwc/pcie-artpec6.c
index 413683d7bd9d..e5b5665786ab 100644
--- a/drivers/pci/dwc/pcie-artpec6.c
+++ b/drivers/pci/dwc/pcie-artpec6.c
@@ -69,8 +69,6 @@ static const struct of_device_id artpec6_pcie_of_match[];
 #define PHY_STATUS			0x118
 #define  PHY_COSPLLLOCK			BIT(0)
 
-#define ARTPEC6_CPU_TO_BUS_ADDR		GENMASK(27, 0)
-
 static u32 artpec6_pcie_readl(struct artpec6_pcie *artpec6_pcie, u32 offset)
 {
 	u32 val;
@@ -84,9 +82,21 @@ static void artpec6_pcie_writel(struct artpec6_pcie *artpec6_pcie, u32 offset, u
 	regmap_write(artpec6_pcie->regmap, offset, val);
 }
 
-static u64 artpec6_pcie_cpu_addr_fixup(u64 pci_addr)
+static u64 artpec6_pcie_cpu_addr_fixup(struct dw_pcie *pci, u64 pci_addr)
 {
-	return pci_addr & ARTPEC6_CPU_TO_BUS_ADDR;
+	struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci);
+	struct pcie_port *pp = &pci->pp;
+	struct dw_pcie_ep *ep = &pci->ep;
+
+	switch (artpec6_pcie->mode) {
+	case DW_PCIE_RC_TYPE:
+		return pci_addr - pp->cfg0_base;
+	case DW_PCIE_EP_TYPE:
+		return pci_addr - ep->phys_base;
+	default:
+		dev_err(pci->dev, "UNKNOWN device type\n");
+	}
+	return pci_addr;
 }
 
 static int artpec6_pcie_establish_link(struct dw_pcie *pci)
diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
index 88abdddee2ad..800be7a4f087 100644
--- a/drivers/pci/dwc/pcie-designware.c
+++ b/drivers/pci/dwc/pcie-designware.c
@@ -149,7 +149,7 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
 	u32 retries, val;
 
 	if (pci->ops->cpu_addr_fixup)
-		cpu_addr = pci->ops->cpu_addr_fixup(cpu_addr);
+		cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr);
 
 	if (pci->iatu_unroll_enabled) {
 		dw_pcie_prog_outbound_atu_unroll(pci, index, type, cpu_addr,
diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h
index 24edac035160..cca5a81c1c74 100644
--- a/drivers/pci/dwc/pcie-designware.h
+++ b/drivers/pci/dwc/pcie-designware.h
@@ -205,7 +205,7 @@ struct dw_pcie_ep {
 };
 
 struct dw_pcie_ops {
-	u64	(*cpu_addr_fixup)(u64 cpu_addr);
+	u64	(*cpu_addr_fixup)(struct dw_pcie *pcie, u64 cpu_addr);
 	u32	(*read_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg,
 			    size_t size);
 	void	(*write_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg,
-- 
2.14.2

  parent reply	other threads:[~2017-10-31 22:41 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-31 22:39 [PATCH v3 00/17] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 01/17] PCI: dwc: Use DMA-API for allocating MSI data Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 02/17] PCI: designware-ep: dw_pcie_ep_set_msi() should only set MMC bits Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 03/17] PCI: designware-ep: Read-only registers need DBI_RO_WR_EN to be writable Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 04/17] PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 05/17] PCI: designware-ep: Remove static keyword from dw_pcie_ep_reset_bar() Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 06/17] PCI: designware-ep: Add generic function for raising MSI irq Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 07/17] PCI: dwc: dra7xx: Refactor Kconfig and Makefile handling for host/ep mode Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 08/17] PCI: dwc: dra7xx: Assign pp->ops in dra7xx_add_pcie_port() rather than in probe Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 09/17] PCI: dwc: dra7xx: Add ifdefs for host/ep specific code Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 10/17] PCI: dwc: artpec6: Remove unused defines Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 11/17] PCI: dwc: artpec6: Use BIT and GENMASK macros Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 12/17] PCI: dwc: artpec6: Split artpec6_pcie_establish_link to smaller functions Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 13/17] bindings: PCI: artpec: Add support for endpoint mode Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 14/17] PCI: dwc: artpec6: " Niklas Cassel
2017-11-02  9:13   ` Arnd Bergmann
2017-11-03  9:56     ` Niklas Cassel
2017-11-03 10:23       ` Arnd Bergmann
2017-11-03 14:16         ` Niklas Cassel
2017-10-31 22:39 ` Niklas Cassel [this message]
2017-10-31 22:39 ` [PATCH v3 16/17] bindings: PCI: artpec: Add support for the ARTPEC-7 SoC Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 17/17] PCI: dwc: artpec6: " Niklas Cassel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171031223936.27549-16-niklas.cassel@axis.com \
    --to=niklas.cassel@axis.com \
    --cc=Joao.Pinto@synopsys.com \
    --cc=bhelgaas@google.com \
    --cc=jespern@axis.com \
    --cc=jingoohan1@gmail.com \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@axis.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=niklass@axis.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome