mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Niklas Cassel <niklas.cassel@axis.com>
To: Niklas Cassel <niklass@axis.com>,
	Jesper Nilsson <jespern@axis.com>,
	Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-arm-kernel@axis.com, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 12/17] PCI: dwc: artpec6: Split artpec6_pcie_establish_link to smaller functions
Date: Tue, 31 Oct 2017 23:39:30 +0100	[thread overview]
Message-ID: <20171031223936.27549-13-niklas.cassel@axis.com> (raw)
In-Reply-To: <20171031223936.27549-1-niklas.cassel@axis.com>

This is done to better match other drivers such as dra7xx and imx6,
but also to prepare for endpoint mode support.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
V3:
* No change.

 drivers/pci/dwc/pcie-artpec6.c | 53 +++++++++++++++++++++++-------------------
 1 file changed, 29 insertions(+), 24 deletions(-)

diff --git a/drivers/pci/dwc/pcie-artpec6.c b/drivers/pci/dwc/pcie-artpec6.c
index 18075e0fab80..3b635e745d25 100644
--- a/drivers/pci/dwc/pcie-artpec6.c
+++ b/drivers/pci/dwc/pcie-artpec6.c
@@ -80,18 +80,23 @@ static u64 artpec6_pcie_cpu_addr_fixup(u64 pci_addr)
 	return pci_addr & ARTPEC6_CPU_TO_BUS_ADDR;
 }
 
-static int artpec6_pcie_establish_link(struct artpec6_pcie *artpec6_pcie)
+static int artpec6_pcie_establish_link(struct dw_pcie *pci)
 {
-	struct dw_pcie *pci = artpec6_pcie->pci;
-	struct pcie_port *pp = &pci->pp;
+	struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci);
 	u32 val;
-	unsigned int retries;
 
-	/* Hold DW core in reset */
 	val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
-	val |= PCIECFG_CORE_RESET_REQ;
+	val |= PCIECFG_LTSSM_ENABLE;
 	artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
 
+	return 0;
+}
+
+static void artpec6_pcie_init_phy(struct artpec6_pcie *artpec6_pcie)
+{
+	u32 val;
+	unsigned int retries;
+
 	val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
 	val |=  PCIECFG_RISRCREN |	/* Receiver term. 50 Ohm */
 		PCIECFG_MODE_TX_DRV_EN |
@@ -131,30 +136,25 @@ static int artpec6_pcie_establish_link(struct artpec6_pcie *artpec6_pcie)
 		val = readl(artpec6_pcie->phy_base + PHY_STATUS);
 		retries--;
 	} while (retries && !(val & PHY_COSPLLLOCK));
+}
+
+static void artpec6_pcie_assert_core_reset(struct artpec6_pcie *artpec6_pcie)
+{
+	u32 val;
 
-	/* Take DW core out of reset */
 	val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
-	val &= ~PCIECFG_CORE_RESET_REQ;
+	val |= PCIECFG_CORE_RESET_REQ;
 	artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
-	usleep_range(100, 200);
+}
 
-	/* setup root complex */
-	dw_pcie_setup_rc(pp);
+static void artpec6_pcie_deassert_core_reset(struct artpec6_pcie *artpec6_pcie)
+{
+	u32 val;
 
-	/* assert LTSSM enable */
 	val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
-	val |= PCIECFG_LTSSM_ENABLE;
+	val &= ~PCIECFG_CORE_RESET_REQ;
 	artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
-
-	/* check if the link is up or not */
-	if (!dw_pcie_wait_for_link(pci))
-		return 0;
-
-	dev_dbg(pci->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
-		dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R0),
-		dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1));
-
-	return -ETIMEDOUT;
+	usleep_range(100, 200);
 }
 
 static void artpec6_pcie_enable_interrupts(struct artpec6_pcie *artpec6_pcie)
@@ -171,7 +171,12 @@ static int artpec6_pcie_host_init(struct pcie_port *pp)
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci);
 
-	artpec6_pcie_establish_link(artpec6_pcie);
+	artpec6_pcie_assert_core_reset(artpec6_pcie);
+	artpec6_pcie_init_phy(artpec6_pcie);
+	artpec6_pcie_deassert_core_reset(artpec6_pcie);
+	dw_pcie_setup_rc(pp);
+	artpec6_pcie_establish_link(pci);
+	dw_pcie_wait_for_link(pci);
 	artpec6_pcie_enable_interrupts(artpec6_pcie);
 
 	return 0;
-- 
2.14.2

  parent reply	other threads:[~2017-10-31 22:40 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-31 22:39 [PATCH v3 00/17] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 01/17] PCI: dwc: Use DMA-API for allocating MSI data Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 02/17] PCI: designware-ep: dw_pcie_ep_set_msi() should only set MMC bits Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 03/17] PCI: designware-ep: Read-only registers need DBI_RO_WR_EN to be writable Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 04/17] PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 05/17] PCI: designware-ep: Remove static keyword from dw_pcie_ep_reset_bar() Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 06/17] PCI: designware-ep: Add generic function for raising MSI irq Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 07/17] PCI: dwc: dra7xx: Refactor Kconfig and Makefile handling for host/ep mode Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 08/17] PCI: dwc: dra7xx: Assign pp->ops in dra7xx_add_pcie_port() rather than in probe Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 09/17] PCI: dwc: dra7xx: Add ifdefs for host/ep specific code Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 10/17] PCI: dwc: artpec6: Remove unused defines Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 11/17] PCI: dwc: artpec6: Use BIT and GENMASK macros Niklas Cassel
2017-10-31 22:39 ` Niklas Cassel [this message]
2017-10-31 22:39 ` [PATCH v3 13/17] bindings: PCI: artpec: Add support for endpoint mode Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 14/17] PCI: dwc: artpec6: " Niklas Cassel
2017-11-02  9:13   ` Arnd Bergmann
2017-11-03  9:56     ` Niklas Cassel
2017-11-03 10:23       ` Arnd Bergmann
2017-11-03 14:16         ` Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 15/17] PCI: dwc: Make cpu_addr_fixup take struct dw_pcie as argument Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 16/17] bindings: PCI: artpec: Add support for the ARTPEC-7 SoC Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 17/17] PCI: dwc: artpec6: " Niklas Cassel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171031223936.27549-13-niklas.cassel@axis.com \
    --to=niklas.cassel@axis.com \
    --cc=bhelgaas@google.com \
    --cc=jespern@axis.com \
    --cc=linux-arm-kernel@axis.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=niklass@axis.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome