mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Niklas Cassel <niklas.cassel@axis.com>
To: Jingoo Han <jingoohan1@gmail.com>,
	Joao Pinto <Joao.Pinto@synopsys.com>,
	Bjorn Helgaas <bhelgaas@google.com>
Cc: Niklas Cassel <niklass@axis.com>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 03/17] PCI: designware-ep: Read-only registers need DBI_RO_WR_EN to be writable
Date: Tue, 31 Oct 2017 23:39:21 +0100	[thread overview]
Message-ID: <20171031223936.27549-4-niklas.cassel@axis.com> (raw)
In-Reply-To: <20171031223936.27549-1-niklas.cassel@axis.com>

Certain registers that pcie-designware-ep tries to write are read-only
registers. However, these registers can become read/write if we first
enable the DBI_RO_WR_EN bit.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
V3:
* No change.

 drivers/pci/dwc/pcie-designware-ep.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c
index c92ab87fd660..3fb34be99715 100644
--- a/drivers/pci/dwc/pcie-designware-ep.c
+++ b/drivers/pci/dwc/pcie-designware-ep.c
@@ -35,8 +35,10 @@ static void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)
 	u32 reg;
 
 	reg = PCI_BASE_ADDRESS_0 + (4 * bar);
+	dw_pcie_dbi_ro_wr_en(pci);
 	dw_pcie_writel_dbi2(pci, reg, 0x0);
 	dw_pcie_writel_dbi(pci, reg, 0x0);
+	dw_pcie_dbi_ro_wr_dis(pci);
 }
 
 static int dw_pcie_ep_write_header(struct pci_epc *epc,
@@ -45,6 +47,7 @@ static int dw_pcie_ep_write_header(struct pci_epc *epc,
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
 
+	dw_pcie_dbi_ro_wr_en(pci);
 	dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, hdr->vendorid);
 	dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, hdr->deviceid);
 	dw_pcie_writeb_dbi(pci, PCI_REVISION_ID, hdr->revid);
@@ -58,6 +61,7 @@ static int dw_pcie_ep_write_header(struct pci_epc *epc,
 	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_ID, hdr->subsys_id);
 	dw_pcie_writeb_dbi(pci, PCI_INTERRUPT_PIN,
 			   hdr->interrupt_pin);
+	dw_pcie_dbi_ro_wr_dis(pci);
 
 	return 0;
 }
@@ -142,8 +146,10 @@ static int dw_pcie_ep_set_bar(struct pci_epc *epc, enum pci_barno bar,
 	if (ret)
 		return ret;
 
+	dw_pcie_dbi_ro_wr_en(pci);
 	dw_pcie_writel_dbi2(pci, reg, size - 1);
 	dw_pcie_writel_dbi(pci, reg, flags);
+	dw_pcie_dbi_ro_wr_dis(pci);
 
 	return 0;
 }
@@ -223,7 +229,9 @@ static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 encode_int)
 	val = dw_pcie_readw_dbi(pci, MSI_MESSAGE_CONTROL);
 	val &= ~MSI_CAP_MMC_MASK;
 	val |= (encode_int << MSI_CAP_MMC_SHIFT) & MSI_CAP_MMC_MASK;
+	dw_pcie_dbi_ro_wr_en(pci);
 	dw_pcie_writew_dbi(pci, MSI_MESSAGE_CONTROL, val);
+	dw_pcie_dbi_ro_wr_dis(pci);
 
 	return 0;
 }
-- 
2.14.2

  parent reply	other threads:[~2017-10-31 22:39 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-31 22:39 [PATCH v3 00/17] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 01/17] PCI: dwc: Use DMA-API for allocating MSI data Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 02/17] PCI: designware-ep: dw_pcie_ep_set_msi() should only set MMC bits Niklas Cassel
2017-10-31 22:39 ` Niklas Cassel [this message]
2017-10-31 22:39 ` [PATCH v3 04/17] PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 05/17] PCI: designware-ep: Remove static keyword from dw_pcie_ep_reset_bar() Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 06/17] PCI: designware-ep: Add generic function for raising MSI irq Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 07/17] PCI: dwc: dra7xx: Refactor Kconfig and Makefile handling for host/ep mode Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 08/17] PCI: dwc: dra7xx: Assign pp->ops in dra7xx_add_pcie_port() rather than in probe Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 09/17] PCI: dwc: dra7xx: Add ifdefs for host/ep specific code Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 10/17] PCI: dwc: artpec6: Remove unused defines Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 11/17] PCI: dwc: artpec6: Use BIT and GENMASK macros Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 12/17] PCI: dwc: artpec6: Split artpec6_pcie_establish_link to smaller functions Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 13/17] bindings: PCI: artpec: Add support for endpoint mode Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 14/17] PCI: dwc: artpec6: " Niklas Cassel
2017-11-02  9:13   ` Arnd Bergmann
2017-11-03  9:56     ` Niklas Cassel
2017-11-03 10:23       ` Arnd Bergmann
2017-11-03 14:16         ` Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 15/17] PCI: dwc: Make cpu_addr_fixup take struct dw_pcie as argument Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 16/17] bindings: PCI: artpec: Add support for the ARTPEC-7 SoC Niklas Cassel
2017-10-31 22:39 ` [PATCH v3 17/17] PCI: dwc: artpec6: " Niklas Cassel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171031223936.27549-4-niklas.cassel@axis.com \
    --to=niklas.cassel@axis.com \
    --cc=Joao.Pinto@synopsys.com \
    --cc=bhelgaas@google.com \
    --cc=jingoohan1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=niklass@axis.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome