mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Borislav Petkov <bp@alien8.de>
To: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: X86 ML <x86@kernel.org>, Andy Lutomirski <luto@amacapital.net>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Peter Zijlstra <peterz@infradead.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 8/9] x86/dumpstack: Save first regs set for the executive summary
Date: Fri, 16 Mar 2018 12:48:49 +0100	[thread overview]
Message-ID: <20180316114849.GD5852@pd.tnic> (raw)
In-Reply-To: <20180315190132.2d653yu7ezf2zplh@treble>

On Thu, Mar 15, 2018 at 02:01:32PM -0500, Josh Poimboeuf wrote:
> no_context() has the following line, right before it calls oops_end():
> 
> 	/* Executive summary in case the body of the oops scrolled away */
> 	printk(KERN_DEFAULT "CR2: %016lx\n", address);
> 
> I think that line can now be removed, since the executive summary
> __show_regs() will include CR2.

Good idea. Done. It adds three more lines to the executive summary but I
think they're worth it.

[ 4020.804801] Modules linked in:
[ 4020.840092] ---[ end trace 13285dfd393b58bd ]---
[ 4020.840828] RIP: 0010:sysrq_handle_crash+0x17/0x20
[ 4020.841731] Code: d1 e8 6d 08 b7 ff 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 e8 76 1f bd ff c7 05 a4 12 19 01 01 00 00 00 0f ae f8 <c6> 04 25 00 00 00 00 01 c3 0f 1f 44 00 00 e8 c6 1b c2 ff fb e9 80 
[ 4020.845056] RSP: 0018:ffffc9000085bdf0 EFLAGS: 00010246
[ 4020.845760] RAX: 0000000000000000 RBX: 0000000000000063 RCX: 0000000000000000
[ 4020.846704] RDX: 0000000000000000 RSI: ffffffff81101e0a RDI: 0000000000000063
[ 4020.847630] RBP: ffffffff822714c0 R08: 0000000000000185 R09: 00000000000c303e
[ 4020.848658] R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000000a
[ 4020.849678] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 4020.850644] FS:  00007ffff7fdb700(0000) GS:ffff88007ec40000(0000) knlGS:0000000000000000
[ 4020.851688] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4020.852994] CR2: 0000000000000000 CR3: 000000007a0f9000 CR4: 00000000000406e0
[ 4020.854018] Kernel panic - not syncing: Fatal exception
[ 4020.855256] Kernel Offset: disabled
[ 4020.855730] ---[ end Kernel panic - not syncing: Fatal exception ]---

> > @@ -352,26 +357,14 @@ int __die(const char *str, struct pt_regs *regs, long err)
> >  	       IS_ENABLED(CONFIG_PAGE_TABLE_ISOLATION) ?
> >  	       (boot_cpu_has(X86_FEATURE_PTI) ? " PTI" : " NOPTI") : "");
> >  
> > +	show_regs(regs);
> > +
> >  	if (notify_die(DIE_OOPS, str, regs, err,
> >  			current->thread.trap_nr, SIGSEGV) == NOTIFY_STOP)
> >  		return 1;
> >  
> >  	print_modules();
> > -	show_regs(regs);
> 
> Was moving the show_regs() call intentional?

Yes. It'd be prudent for registers to come out unconditionally and
not some of the notifiers to make us exit early. Which kinda needs
print_modules() to go up too. Fixed.

> I didn't see it mentioned in the changelog.

Fixed.

> Doesn't this hunk belong in the previous patch, which added the
> __show_regs -> show_ip() -> show_opcodes() call path?

Yeah, and the PAGE_OFFSET check needs to happen in show_ip() too.

Thanks for the detailed review, here's the current splat format:

[   29.046500] sysrq: SysRq : Trigger a crash
[   29.048605] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[   29.051639] PGD 79afd067 P4D 79afd067 PUD 7a1a2067 PMD 0 
[   29.052557] Oops: 0002 [#1] PREEMPT SMP
[   29.052557] CPU: 7 PID: 3693 Comm: bash Not tainted 4.16.0-rc5+ #8
[   29.052557] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[   29.052557] RIP: 0010:sysrq_handle_crash+0x17/0x20
[   29.052557] Code: d1 e8 6d 08 b7 ff 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 e8 76 1f bd ff c7 05 a4 12 19 01 01 00 00 00 0f ae f8 <c6> 04 25 00 00 00 00 01 c3 0f 1f 44 00 00 e8 c6 1b c2 ff fb e9 80 
[   29.052557] RSP: 0018:ffffc900007cbdf0 EFLAGS: 00010246
[   29.052557] RAX: 0000000000000000 RBX: 0000000000000063 RCX: 0000000000000000
[   29.052557] RDX: 0000000000000000 RSI: ffffffff81101e0a RDI: 0000000000000063
[   29.052557] RBP: ffffffff822714c0 R08: 0000000000000185 R09: 000000000000b5a4
[   29.052557] R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000000a
[   29.052557] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[   29.052557] FS:  00007ffff7fdb700(0000) GS:ffff88007edc0000(0000) knlGS:0000000000000000
[   29.052557] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   29.052557] CR2: 0000000000000000 CR3: 00000000799e1000 CR4: 00000000000406e0
[   29.052557] Call Trace:
[   29.052557]  __handle_sysrq+0x9e/0x160
[   29.052557]  write_sysrq_trigger+0x2b/0x30
[   29.052557]  proc_reg_write+0x38/0x70
[   29.052557]  __vfs_write+0x36/0x160
[   29.052557]  ? __fd_install+0x69/0x110
[   29.052557]  ? preempt_count_add+0x74/0xb0
[   29.052557]  ? _raw_spin_lock+0x13/0x30
[   29.052557]  ? set_close_on_exec+0x41/0x80
[   29.052557]  ? preempt_count_sub+0xa8/0x100
[   29.052557]  vfs_write+0xc0/0x190
[   29.052557]  SyS_write+0x64/0xe0
[   29.052557]  ? trace_hardirqs_off_thunk+0x1a/0x1c
[   29.052557]  do_syscall_64+0x70/0x130
[   29.052557]  entry_SYSCALL_64_after_hwframe+0x42/0xb7
[   29.052557] RIP: 0033:0x7ffff74b9620
[   29.052557] Code: Bad RIP value.
[   29.052557] RSP: 002b:00007fffffffe6f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[   29.052557] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007ffff74b9620
[   29.052557] RDX: 0000000000000002 RSI: 0000000000705408 RDI: 0000000000000001
[   29.052557] RBP: 0000000000705408 R08: 000000000000000a R09: 00007ffff7fdb700
[   29.052557] R10: 00007ffff77826a0 R11: 0000000000000246 R12: 00007ffff77842a0
[   29.052557] R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000
[   29.052557] Modules linked in:
[   29.085219] ---[ end trace c579921b8f40a393 ]---
[   29.085920] RIP: 0010:sysrq_handle_crash+0x17/0x20
[   29.086704] Code: d1 e8 6d 08 b7 ff 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 e8 76 1f bd ff c7 05 a4 12 19 01 01 00 00 00 0f ae f8 <c6> 04 25 00 00 00 00 01 c3 0f 1f 44 00 00 e8 c6 1b c2 ff fb e9 80 
[   29.089439] RSP: 0018:ffffc900007cbdf0 EFLAGS: 00010246
[   29.090117] RAX: 0000000000000000 RBX: 0000000000000063 RCX: 0000000000000000
[   29.091039] RDX: 0000000000000000 RSI: ffffffff81101e0a RDI: 0000000000000063
[   29.091959] RBP: ffffffff822714c0 R08: 0000000000000185 R09: 000000000000b5a4
[   29.092935] R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000000a
[   29.093948] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[   29.094885] FS:  00007ffff7fdb700(0000) GS:ffff88007edc0000(0000) knlGS:0000000000000000
[   29.095925] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   29.096731] CR2: 0000000000000000 CR3: 00000000799e1000 CR4: 00000000000406e0
[   29.097784] Kernel panic - not syncing: Fatal exception
[   29.098882] Kernel Offset: disabled
[   29.099351] ---[ end Kernel panic - not syncing: Fatal exception ]---

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

  reply	other threads:[~2018-03-16 11:49 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-15 15:44 [PATCH 0/9] x86/dumpstack: Cleanups and user opcode bytes Code: section, v2 Borislav Petkov
2018-03-15 15:44 ` [PATCH 1/9] x86/dumstack: Remove code_bytes Borislav Petkov
2018-03-15 18:12   ` Josh Poimboeuf
2018-03-15 15:44 ` [PATCH 2/9] x86/dumpstack: Unexport oops_begin() Borislav Petkov
2018-03-15 15:44 ` [PATCH 3/9] x86/dumpstack: Carve out Code: dumping into a function Borislav Petkov
2018-03-15 15:44 ` [PATCH 4/9] x86/dumpstack: Improve opcodes dumping in the Code: section Borislav Petkov
2018-03-15 18:10   ` Josh Poimboeuf
2018-03-15 18:16     ` Borislav Petkov
2018-03-15 19:06       ` Josh Poimboeuf
2018-03-16 11:57       ` David Laight
2018-03-15 18:19   ` Josh Poimboeuf
2018-03-15 18:23   ` Josh Poimboeuf
2018-03-15 15:44 ` [PATCH 5/9] x86/dumpstack: Add loglevel argument to show_opcodes() Borislav Petkov
2018-03-15 15:44 ` [PATCH 6/9] x86/fault: Dump user opcode bytes on fatal faults Borislav Petkov
2018-03-15 15:44 ` [PATCH 7/9] x86/dumpstack: Add a show_ip() function Borislav Petkov
2018-03-15 18:34   ` Josh Poimboeuf
2018-03-15 18:55     ` Borislav Petkov
2018-03-15 15:44 ` [PATCH 8/9] x86/dumpstack: Save first regs set for the executive summary Borislav Petkov
2018-03-15 19:01   ` Josh Poimboeuf
2018-03-16 11:48     ` Borislav Petkov [this message]
2018-03-16 12:01       ` Josh Poimboeuf
2018-03-16 12:11         ` Borislav Petkov
2018-03-16 13:16           ` Josh Poimboeuf
2018-03-16 13:44             ` Borislav Petkov
2018-03-16 17:22       ` Linus Torvalds
2018-03-16 17:40         ` Josh Poimboeuf
2018-03-16 17:45         ` Borislav Petkov
2018-03-16 18:38           ` Josh Poimboeuf
2018-03-15 15:44 ` [PATCH 9/9] x86/dumpstack: Explain the reasoning for the prologue and buffer size Borislav Petkov
2018-03-15 18:07   ` Josh Poimboeuf
2018-03-15 18:17     ` Borislav Petkov
2018-03-15 17:51 ` [PATCH 0/9] x86/dumpstack: Cleanups and user opcode bytes Code: section, v2 Linus Torvalds
2018-04-17 14:40   ` Borislav Petkov
2018-04-17 20:16     ` Josh Poimboeuf
2018-04-17 21:06       ` Borislav Petkov
2018-04-18 13:26         ` Josh Poimboeuf
2018-04-17 16:11 [PATCH 0/9] x86/dumpstack: Cleanups and user opcode bytes Code: section, v3 Borislav Petkov
2018-04-17 16:11 ` [PATCH 8/9] x86/dumpstack: Save first regs set for the executive summary Borislav Petkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180316114849.GD5852@pd.tnic \
    --to=bp@alien8.de \
    --cc=jpoimboe@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@amacapital.net \
    --cc=peterz@infradead.org \
    --cc=torvalds@linux-foundation.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome