mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Apurva Nandan <a-nandan@ti.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Mark Brown <broonie@kernel.org>, Apurva Nandan <a-nandan@ti.com>,
	Patrice Chotard <patrice.chotard@foss.st.com>,
	Christophe Kerello <christophe.kerello@foss.st.com>,
	Boris Brezillon <boris.brezillon@collabora.com>,
	Daniel Palmer <daniel@0x0f.com>,
	Alexander Lobakin <alobakin@pm.me>,
	<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	<linux-spi@vger.kernel.org>
Cc: <p.yadav@ti.com>
Subject: [PATCH v3 17/17] mtd: spinand: winbond: Add support for Winbond W35N01JW SPI NAND flash
Date: Sat, 1 Jan 2022 13:12:50 +0530	[thread overview]
Message-ID: <20220101074250.14443-18-a-nandan@ti.com> (raw)
In-Reply-To: <20220101074250.14443-1-a-nandan@ti.com>

Winbond W35N01JW is a SPI NAND flash supporting Octal DTR SPI protocol.
Add op_variants and ctrl_ops_variants for W35N01JW, thus adding all
required Octal DTR ops. Add W35N01JW's OOB layout functions for the
mtd_ooblayout_ops. Finally, add an entry for W35N01JW in spinand_info
table.

Datasheet: https://www.winbond.com/export/sites/winbond/datasheet/W35N01JW_Datasheet_Brief.pdf

Signed-off-by: Apurva Nandan <a-nandan@ti.com>
---
 drivers/mtd/nand/spi/winbond.c | 71 ++++++++++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)

diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index 5b943169120e..42fdb578f731 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -42,6 +42,37 @@ static SPINAND_OP_VARIANTS(update_cache_variants_w25xxgv,
 		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
 		SPINAND_PROG_LOAD(false, 0, NULL, 0));
 
+static SPINAND_OP_VARIANTS(read_cache_variants_w35n01jw,
+		SPINAND_PAGE_READ_FROM_CACHE_OCTALIO_DTR_OP(0, 24, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants_w35n01jw,
+		SPINAND_PROG_LOAD_OCTALIO_DTR(true, 0, NULL, 0),
+		SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants_w35n01jw,
+		SPINAND_PROG_LOAD_OCTALIO_DTR(false, 0, NULL, 0),
+		SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+static SPINAND_CTRL_OPS_VARIANTS(ctrl_ops_variants_w35n01jw,
+		SPINAND_CTRL_OPS(SPINAND_8D_8D_8D,
+				 SPINAND_RESET_OP_OCTAL_DTR,
+				 SPINAND_GET_FEATURE_OP_OCTAL_DTR(0, NULL),
+				 SPINAND_SET_FEATURE_OP_OCTAL_DTR(0, NULL),
+				 SPINAND_WR_EN_DIS_OP_OCTAL_DTR(true),
+				 SPINAND_BLK_ERASE_OP_OCTAL_DTR(0),
+				 SPINAND_PAGE_READ_OP_OCTAL_DTR(0),
+				 SPINAND_PROG_EXEC_OP_OCTAL_DTR(0)),
+		SPINAND_CTRL_OPS(SPINAND_1S_1S_1S,
+				 SPINAND_RESET_OP,
+				 SPINAND_GET_FEATURE_OP(0, NULL),
+				 SPINAND_SET_FEATURE_OP(0, NULL),
+				 SPINAND_WR_EN_DIS_OP(true),
+				 SPINAND_BLK_ERASE_OP(0),
+				 SPINAND_PAGE_READ_OP(0),
+				 SPINAND_PROG_EXEC_OP(0)));
+
 static int w25m02gv_ooblayout_ecc(struct mtd_info *mtd, int section,
 				  struct mtd_oob_region *region)
 {
@@ -66,11 +97,40 @@ static int w25m02gv_ooblayout_free(struct mtd_info *mtd, int section,
 	return 0;
 }
 
+static int w35n01jw_ooblayout_ecc(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *region)
+{
+	if (section > 7)
+		return -ERANGE;
+
+	region->offset = (16 * section) + 12;
+	region->length = 4;
+
+	return 0;
+}
+
+static int w35n01jw_ooblayout_free(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
+{
+	if (section > 7)
+		return -ERANGE;
+
+	region->offset = (16 * section) + 2;
+	region->length = 10;
+
+	return 0;
+}
+
 static const struct mtd_ooblayout_ops w25m02gv_ooblayout = {
 	.ecc = w25m02gv_ooblayout_ecc,
 	.free = w25m02gv_ooblayout_free,
 };
 
+static const struct mtd_ooblayout_ops w35n01jw_ooblayout = {
+	.ecc = w35n01jw_ooblayout_ecc,
+	.free = w35n01jw_ooblayout_free,
+};
+
 static int w25m02gv_select_target(struct spinand_device *spinand,
 				  unsigned int target)
 {
@@ -105,6 +165,17 @@ static const struct spinand_info winbond_spinand_table[] = {
 					      &update_cache_variants_w25xxgv),
 		     0,
 		     SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL)),
+	SPINAND_INFO("W35N01JW",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xdc),
+		     NAND_MEMORG(1, 4096, 128, 64, 512, 20, 1, 1, 1),
+		     NAND_ECCREQ(1, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_w35n01jw,
+					      &write_cache_variants_w35n01jw,
+					      &update_cache_variants_w35n01jw),
+		     SPINAND_HAS_OCTAL_DTR_BIT | SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&w35n01jw_ooblayout, NULL),
+		     SPINAND_INFO_CTRL_OPS_VARIANTS(&ctrl_ops_variants_w35n01jw)),
+
 };
 
 static int winbond_spinand_init(struct spinand_device *spinand)
-- 
2.25.1


      parent reply	other threads:[~2022-01-01  7:44 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-01  7:42 [PATCH v3 00/17] mtd: spinand: Add Octal DTR SPI (8D-8D-8D) mode support Apurva Nandan
2022-01-01  7:42 ` [PATCH v3 01/17] spi: spi-mem: Add DTR templates for cmd, address, dummy and data phase Apurva Nandan
2022-01-04 14:52   ` Mark Brown
2022-01-04 15:31   ` Boris Brezillon
2022-01-05  5:50     ` Pratyush Yadav
2022-01-05  7:36       ` Boris Brezillon
2022-01-05  8:24     ` Tudor.Ambarus
2022-01-01  7:42 ` [PATCH v3 02/17] mtd: spinand: Define macros for Octal DTR ops Apurva Nandan
2022-01-01  7:42 ` [PATCH v3 03/17] mtd: spinand: Add enum spinand_protocol to indicate current SPI IO mode Apurva Nandan
2022-01-03 10:05   ` Boris Brezillon
2022-01-01  7:42 ` [PATCH v3 04/17] mtd: spinand: Rename 'op_templates' to 'data_ops' Apurva Nandan
2022-01-03  9:48   ` Boris Brezillon
2022-01-01  7:42 ` [PATCH v3 05/17] mtd: spinand: Define ctrl_ops for non-page read/write op templates Apurva Nandan
2022-01-03 10:01   ` Boris Brezillon
2022-01-03 10:36     ` Boris Brezillon
2022-02-15 15:33     ` Apurva Nandan
2022-02-15 17:37       ` Boris Brezillon
2022-03-02 15:30         ` Apurva Nandan
2022-03-02 20:05           ` Boris Brezillon
2022-03-10  7:57         ` Apurva Nandan
2022-03-10  8:40           ` Boris Brezillon
2022-03-14 11:47             ` Apurva Nandan
2022-01-01  7:42 ` [PATCH v3 06/17] mtd: spinand: Define default ctrl_ops in the core Apurva Nandan
2022-01-01  7:42 ` [PATCH v3 07/17] mtd: spinand: Switch from op macros usage to 'ctrl_ops' " Apurva Nandan
2022-01-01  7:42 ` [PATCH v3 08/17] mtd: spinand: Add support for manufacturer-based ctrl_ops variations Apurva Nandan
2022-01-01  7:42 ` [PATCH v3 09/17] mtd: spinand: Add change_mode() in manufacturer_ops Apurva Nandan
2022-01-05  9:52   ` Boris Brezillon
2022-01-01  7:42 ` [PATCH v3 10/17] mtd: spinand: Add pointer to probed flash's spinand_info Apurva Nandan
2022-01-01  7:42 ` [PATCH v3 11/17] mtd: spinand: Allow enabling/disabling Octal DTR mode in the core Apurva Nandan
2022-01-03 10:14   ` Boris Brezillon
2022-01-01  7:42 ` [PATCH v3 12/17] mtd: spinand: Add mtd_suspend() to disable Octal DTR mode at suspend Apurva Nandan
2022-01-03 10:17   ` Boris Brezillon
2022-01-01  7:42 ` [PATCH v3 13/17] mtd: spinand: winbond: Add support for write volatile configuration register op Apurva Nandan
2022-01-01  7:42 ` [PATCH v3 14/17] mtd: spinand: winbond: Add octal_dtr_enable/disable() in manufacturer_ops Apurva Nandan
2022-01-01  7:42 ` [PATCH v3 15/17] mtd: spianand: winbond: Add change_mode() manufacturer_ops Apurva Nandan
2022-01-03 10:27   ` Boris Brezillon
2022-01-01  7:42 ` [PATCH v3 16/17] mtd: spinand: winbond: Rename cache op_variants struct variable Apurva Nandan
2022-01-01  7:42 ` Apurva Nandan [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220101074250.14443-18-a-nandan@ti.com \
    --to=a-nandan@ti.com \
    --cc=alobakin@pm.me \
    --cc=boris.brezillon@collabora.com \
    --cc=broonie@kernel.org \
    --cc=christophe.kerello@foss.st.com \
    --cc=daniel@0x0f.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=p.yadav@ti.com \
    --cc=patrice.chotard@foss.st.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®