[PATCH v3 06/17] mtd: spinand: Define default ctrl_ops in the core

[Apurva Nandan <a-nandan@ti.com>]

Add default ctrl_ops in the core, which can be used when the op
templates are commonly used ones. Till now, the core had used only
fixed ctrl operations, so the default 'ctrl_ops' is just these ops
macros initialized with default arguments. The default protocol is
1S_1S_1S.

Signed-off-by: Apurva Nandan <a-nandan@ti.com>
---
 drivers/mtd/nand/spi/core.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 481516c9db79..4a75eb06bb52 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -904,6 +904,16 @@ static const struct spinand_manufacturer *spinand_manufacturers[] = {
 	&winbond_spinand_manufacturer,
 };
 
+static const struct spinand_ctrl_ops spinand_default_ctrl_ops =
+			SPINAND_CTRL_OPS(SPINAND_1S_1S_1S,
+					 SPINAND_RESET_OP,
+					 SPINAND_GET_FEATURE_OP(0, NULL),
+					 SPINAND_SET_FEATURE_OP(0, NULL),
+					 SPINAND_WR_EN_DIS_OP(true),
+					 SPINAND_BLK_ERASE_OP(0),
+					 SPINAND_PAGE_READ_OP(0),
+					 SPINAND_PROG_EXEC_OP(0));
+
 static int spinand_manufacturer_match(struct spinand_device *spinand,
 				      enum spinand_readid_method rdid_method)
 {
@@ -1156,6 +1166,8 @@ static void spinand_mtd_resume(struct mtd_info *mtd)
 	int ret;
 
 	spinand->protocol = SPINAND_1S_1S_1S;
+	spinand->ctrl_ops = &spinand_default_ctrl_ops;
+
 	ret = spinand_reset_op(spinand);
 	if (ret)
 		return;
@@ -1183,6 +1195,8 @@ static int spinand_init(struct spinand_device *spinand)
 		return -ENOMEM;
 
 	spinand->protocol = SPINAND_1S_1S_1S;
+	spinand->ctrl_ops = &spinand_default_ctrl_ops;
+
 	ret = spinand_detect(spinand);
 	if (ret)
 		goto err_free_bufs;
-- 
2.25.1