mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Alejandro Jimenez <alejandro.j.jimenez@oracle.com>,
	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
	Maxim Levitsky <mlevitsk@redhat.com>,
	Li RongQing <lirongqing@baidu.com>
Subject: [PATCH v3 22/28] KVM: SVM: Inhibit AVIC if vCPUs are aliased in logical mode
Date: Tue, 20 Sep 2022 23:31:28 +0000	[thread overview]
Message-ID: <20220920233134.940511-23-seanjc@google.com> (raw)
In-Reply-To: <20220920233134.940511-1-seanjc@google.com>

Inhibit SVM's AVIC if multiple vCPUs are aliased to the same logical ID.
Architecturally, all CPUs whose logical ID matches the MDA are supposed
to receive the interrupt; overwriting existing entries in AVIC's
logical=>physical map can result in missed IPIs.

Fixes: 18f40c53e10f ("svm: Add VMEXIT handlers for AVIC")
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
 arch/x86/include/asm/kvm_host.h | 6 ++++++
 arch/x86/kvm/lapic.c            | 5 +++++
 arch/x86/kvm/svm/avic.c         | 3 ++-
 3 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 594674eefe59..32c0bca052e3 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1152,6 +1152,12 @@ enum kvm_apicv_inhibit {
 	 * APIC base.  For simplicity, this is sticky.
 	 */
 	APICV_INHIBIT_REASON_X2APIC,
+
+	/*
+	 * AVIC is disabled because not all vCPUs with a valid LDR have a 1:1
+	 * mapping between logical ID and vCPU.
+	 */
+	APICV_INHIBIT_REASON_LOGICAL_ID_ALIASED,
 };
 
 struct kvm_arch {
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 4db162b1f0b1..804d529d9bfb 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -391,6 +391,11 @@ void kvm_recalculate_apic_map(struct kvm *kvm)
 	else
 		kvm_clear_apicv_inhibit(kvm, APICV_INHIBIT_REASON_PHYSICAL_ID_ALIASED);
 
+	if (!new || new->logical_mode == KVM_APIC_MODE_MAP_DISABLED)
+		kvm_set_apicv_inhibit(kvm, APICV_INHIBIT_REASON_LOGICAL_ID_ALIASED);
+	else
+		kvm_clear_apicv_inhibit(kvm, APICV_INHIBIT_REASON_LOGICAL_ID_ALIASED);
+
 	old = rcu_dereference_protected(kvm->arch.apic_map,
 			lockdep_is_held(&kvm->arch.apic_map_lock));
 	rcu_assign_pointer(kvm->arch.apic_map, new);
diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index 2908adc79ea6..27d5abc15a91 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -968,7 +968,8 @@ bool avic_check_apicv_inhibit_reasons(enum kvm_apicv_inhibit reason)
 			  BIT(APICV_INHIBIT_REASON_PHYSICAL_ID_ALIASED) |
 			  BIT(APICV_INHIBIT_REASON_APIC_ID_MODIFIED) |
 			  BIT(APICV_INHIBIT_REASON_APIC_BASE_MODIFIED) |
-			  BIT(APICV_INHIBIT_REASON_X2APIC);
+			  BIT(APICV_INHIBIT_REASON_X2APIC) |
+			  BIT(APICV_INHIBIT_REASON_LOGICAL_ID_ALIASED);
 
 	return supported & BIT(reason);
 }
-- 
2.37.3.968.ga6b4b080e4-goog


  parent reply	other threads:[~2022-09-20 23:33 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-20 23:31 [PATCH v3 00/28] KVM: x86: AVIC and local APIC fixes+cleanups Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 01/28] KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 02/28] KVM: x86: Purge "highest ISR" cache when updating APICv state Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 03/28] KVM: SVM: Flush the "current" TLB when activating AVIC Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 04/28] KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 05/28] KVM: x86: Don't inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID Sean Christopherson
2022-09-28  3:15   ` Alejandro Jimenez
2022-09-28  5:55     ` Maxim Levitsky
2022-09-28 16:51       ` Sean Christopherson
2022-09-28 17:51         ` Maxim Levitsky
2022-09-28 18:03           ` Sean Christopherson
2022-09-28 18:16             ` Maxim Levitsky
2022-09-28 20:44               ` Sean Christopherson
2022-09-28 20:50         ` Alejandro Jimenez
2022-09-20 23:31 ` [PATCH v3 06/28] KVM: x86: Move APIC access page helper to common x86 code Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 07/28] KVM: x86: Inhibit APIC memslot if x2APIC and AVIC are enabled Sean Christopherson
2022-09-23 10:27   ` Maxim Levitsky
2022-09-26 17:00     ` Sean Christopherson
2022-09-28  6:21       ` Maxim Levitsky
2022-09-28 16:33         ` Sean Christopherson
2022-09-28 17:40           ` Maxim Levitsky
2022-09-28 22:35             ` Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 08/28] KVM: SVM: Don't put/load AVIC when setting virtual APIC mode Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 09/28] KVM: SVM: Replace "avic_mode" enum with "x2avic_enabled" boolean Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 10/28] KVM: SVM: Compute dest based on sender's x2APIC status for AVIC kick Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 11/28] KVM: SVM: Fix x2APIC Logical ID calculation for avic_kick_target_vcpus_fast Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 12/28] Revert "KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible" Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 13/28] KVM: SVM: Document that vCPU ID == APIC ID in AVIC kick fastpatch Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 14/28] KVM: SVM: Add helper to perform final AVIC "kick" of single vCPU Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 15/28] KVM: x86: Explicitly skip optimized logical map setup if vCPU's LDR==0 Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 16/28] KVM: x86: Explicitly track all possibilities for APIC map's logical modes Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 17/28] KVM: x86: Skip redundant x2APIC logical mode optimized cluster setup Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 18/28] KVM: x86: Disable APIC logical map if logical ID covers multiple MDAs Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 19/28] KVM: x86: Disable APIC logical map if vCPUs are aliased in logical mode Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 20/28] KVM: x86: Honor architectural behavior for aliased 8-bit APIC IDs Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 21/28] KVM: x86: Inhibit APICv/AVIC if the optimized physical map is disabled Sean Christopherson
2022-09-20 23:31 ` Sean Christopherson [this message]
2022-09-20 23:31 ` [PATCH v3 23/28] KVM: SVM: Always update local APIC on writes to logical dest register Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 24/28] KVM: SVM: Update svm->ldr_reg cache even if LDR is "bad" Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 25/28] KVM: SVM: Require logical ID to be power-of-2 for AVIC entry Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 26/28] KVM: SVM: Handle multiple logical targets in AVIC kick fastpath Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 27/28] KVM: SVM: Ignore writes to Remote Read Data on AVIC write traps Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 28/28] Revert "KVM: SVM: Do not throw warning when calling avic_vcpu_load on a running vcpu" Sean Christopherson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220920233134.940511-23-seanjc@google.com \
    --to=seanjc@google.com \
    --cc=alejandro.j.jimenez@oracle.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lirongqing@baidu.com \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=suravee.suthikulpanit@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®