From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Alejandro Jimenez <alejandro.j.jimenez@oracle.com>,
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
Li RongQing <lirongqing@baidu.com>
Subject: [PATCH v3 26/28] KVM: SVM: Handle multiple logical targets in AVIC kick fastpath
Date: Tue, 20 Sep 2022 23:31:32 +0000 [thread overview]
Message-ID: <20220920233134.940511-27-seanjc@google.com> (raw)
In-Reply-To: <20220920233134.940511-1-seanjc@google.com>
Iterate over all target logical IDs in the AVIC kick fastpath instead of
bailing if there is more than one target. Now that KVM inhibits AVIC if
vCPUs aren't mapped 1:1 with logical IDs, each bit in the destination is
guaranteed to match to at most one vCPU, i.e. iterating over the bitmap
is guaranteed to kick each valid target exactly once.
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/kvm/svm/avic.c | 112 ++++++++++++++++++++++------------------
1 file changed, 63 insertions(+), 49 deletions(-)
diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index a9e4e09f83fc..17e64b056e4e 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -327,6 +327,50 @@ static void avic_kick_vcpu(struct kvm_vcpu *vcpu, u32 icrl)
icrl & APIC_VECTOR_MASK);
}
+static void avic_kick_vcpu_by_physical_id(struct kvm *kvm, u32 physical_id,
+ u32 icrl)
+{
+ /*
+ * KVM inhibits AVIC if any vCPU ID diverges from the vCPUs APIC ID,
+ * i.e. APIC ID == vCPU ID.
+ */
+ struct kvm_vcpu *target_vcpu = kvm_get_vcpu_by_id(kvm, physical_id);
+
+ /* Once again, nothing to do if the target vCPU doesn't exist. */
+ if (unlikely(!target_vcpu))
+ return;
+
+ avic_kick_vcpu(target_vcpu, icrl);
+}
+
+static void avic_kick_vcpu_by_logical_id(struct kvm *kvm, u32 *avic_logical_id_table,
+ u32 logid_index, u32 icrl)
+{
+ u32 physical_id;
+
+ if (avic_logical_id_table) {
+ u32 logid_entry = avic_logical_id_table[logid_index];
+
+ /* Nothing to do if the logical destination is invalid. */
+ if (unlikely(!(logid_entry & AVIC_LOGICAL_ID_ENTRY_VALID_MASK)))
+ return;
+
+ physical_id = logid_entry &
+ AVIC_LOGICAL_ID_ENTRY_GUEST_PHYSICAL_ID_MASK;
+ } else {
+ /*
+ * For x2APIC, the logical APIC ID is a read-only value that is
+ * derived from the x2APIC ID, thus the x2APIC ID can be found
+ * by reversing the calculation (stored in logid_index). Note,
+ * bits 31:20 of the x2APIC ID aren't propagated to the logical
+ * ID, but KVM limits the x2APIC ID limited to KVM_MAX_VCPU_IDS.
+ */
+ physical_id = logid_index;
+ }
+
+ avic_kick_vcpu_by_physical_id(kvm, physical_id, icrl);
+}
+
/*
* A fast-path version of avic_kick_target_vcpus(), which attempts to match
* destination APIC ID to vCPU without looping through all vCPUs.
@@ -334,11 +378,10 @@ static void avic_kick_vcpu(struct kvm_vcpu *vcpu, u32 icrl)
static int avic_kick_target_vcpus_fast(struct kvm *kvm, struct kvm_lapic *source,
u32 icrl, u32 icrh, u32 index)
{
- u32 l1_physical_id, dest;
- struct kvm_vcpu *target_vcpu;
int dest_mode = icrl & APIC_DEST_MASK;
int shorthand = icrl & APIC_SHORT_MASK;
struct kvm_svm *kvm_svm = to_kvm_svm(kvm);
+ u32 dest;
if (shorthand != APIC_DEST_NOSHORT)
return -EINVAL;
@@ -355,14 +398,14 @@ static int avic_kick_target_vcpus_fast(struct kvm *kvm, struct kvm_lapic *source
if (!apic_x2apic_mode(source) && dest == APIC_BROADCAST)
return -EINVAL;
- l1_physical_id = dest;
-
- if (WARN_ON_ONCE(l1_physical_id != index))
+ if (WARN_ON_ONCE(dest != index))
return -EINVAL;
+ avic_kick_vcpu_by_physical_id(kvm, dest, icrl);
} else {
- u32 bitmap, cluster;
- int logid_index;
+ u32 *avic_logical_id_table;
+ unsigned long bitmap, i;
+ u32 cluster;
if (apic_x2apic_mode(source)) {
/* 16 bit dest mask, 16 bit cluster id */
@@ -382,50 +425,21 @@ static int avic_kick_target_vcpus_fast(struct kvm *kvm, struct kvm_lapic *source
if (unlikely(!bitmap))
return 0;
- if (!is_power_of_2(bitmap))
- /* multiple logical destinations, use slow path */
- return -EINVAL;
-
- logid_index = cluster + __ffs(bitmap);
-
- if (apic_x2apic_mode(source)) {
- /*
- * For x2APIC, the logical APIC ID is a read-only value
- * that is derived from the x2APIC ID, thus the x2APIC
- * ID can be found by reversing the calculation (done
- * above). Note, bits 31:20 of the x2APIC ID are not
- * propagated to the logical ID, but KVM limits the
- * x2APIC ID limited to KVM_MAX_VCPU_IDS.
- */
- l1_physical_id = logid_index;
- } else {
- u32 *avic_logical_id_table =
- page_address(kvm_svm->avic_logical_id_table_page);
-
- u32 logid_entry = avic_logical_id_table[logid_index];
-
- if (WARN_ON_ONCE(index != logid_index))
- return -EINVAL;
-
- /* Nothing to do if the logical destination is invalid. */
- if (unlikely(!(logid_entry & AVIC_LOGICAL_ID_ENTRY_VALID_MASK)))
- return 0;
-
- l1_physical_id = logid_entry &
- AVIC_LOGICAL_ID_ENTRY_GUEST_PHYSICAL_ID_MASK;
- }
+ if (apic_x2apic_mode(source))
+ avic_logical_id_table = NULL;
+ else
+ avic_logical_id_table = page_address(kvm_svm->avic_logical_id_table_page);
+
+ /*
+ * AVIC is inhibited if vCPUs aren't mapped 1:1 with logical
+ * IDs, thus each bit in the destination is guaranteed to map
+ * to at most one vCPU.
+ */
+ for_each_set_bit(i, &bitmap, 16)
+ avic_kick_vcpu_by_logical_id(kvm, avic_logical_id_table,
+ cluster + i, icrl);
}
- /*
- * KVM inhibits AVIC if any vCPU ID diverges from the vCPUs APIC ID,
- * i.e. APIC ID == vCPU ID. Once again, nothing to do if the target
- * vCPU doesn't exist.
- */
- target_vcpu = kvm_get_vcpu_by_id(kvm, l1_physical_id);
- if (unlikely(!target_vcpu))
- return 0;
-
- avic_kick_vcpu(target_vcpu, icrl);
return 0;
}
--
2.37.3.968.ga6b4b080e4-goog
next prev parent reply other threads:[~2022-09-20 23:34 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-20 23:31 [PATCH v3 00/28] KVM: x86: AVIC and local APIC fixes+cleanups Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 01/28] KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 02/28] KVM: x86: Purge "highest ISR" cache when updating APICv state Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 03/28] KVM: SVM: Flush the "current" TLB when activating AVIC Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 04/28] KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 05/28] KVM: x86: Don't inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID Sean Christopherson
2022-09-28 3:15 ` Alejandro Jimenez
2022-09-28 5:55 ` Maxim Levitsky
2022-09-28 16:51 ` Sean Christopherson
2022-09-28 17:51 ` Maxim Levitsky
2022-09-28 18:03 ` Sean Christopherson
2022-09-28 18:16 ` Maxim Levitsky
2022-09-28 20:44 ` Sean Christopherson
2022-09-28 20:50 ` Alejandro Jimenez
2022-09-20 23:31 ` [PATCH v3 06/28] KVM: x86: Move APIC access page helper to common x86 code Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 07/28] KVM: x86: Inhibit APIC memslot if x2APIC and AVIC are enabled Sean Christopherson
2022-09-23 10:27 ` Maxim Levitsky
2022-09-26 17:00 ` Sean Christopherson
2022-09-28 6:21 ` Maxim Levitsky
2022-09-28 16:33 ` Sean Christopherson
2022-09-28 17:40 ` Maxim Levitsky
2022-09-28 22:35 ` Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 08/28] KVM: SVM: Don't put/load AVIC when setting virtual APIC mode Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 09/28] KVM: SVM: Replace "avic_mode" enum with "x2avic_enabled" boolean Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 10/28] KVM: SVM: Compute dest based on sender's x2APIC status for AVIC kick Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 11/28] KVM: SVM: Fix x2APIC Logical ID calculation for avic_kick_target_vcpus_fast Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 12/28] Revert "KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible" Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 13/28] KVM: SVM: Document that vCPU ID == APIC ID in AVIC kick fastpatch Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 14/28] KVM: SVM: Add helper to perform final AVIC "kick" of single vCPU Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 15/28] KVM: x86: Explicitly skip optimized logical map setup if vCPU's LDR==0 Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 16/28] KVM: x86: Explicitly track all possibilities for APIC map's logical modes Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 17/28] KVM: x86: Skip redundant x2APIC logical mode optimized cluster setup Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 18/28] KVM: x86: Disable APIC logical map if logical ID covers multiple MDAs Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 19/28] KVM: x86: Disable APIC logical map if vCPUs are aliased in logical mode Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 20/28] KVM: x86: Honor architectural behavior for aliased 8-bit APIC IDs Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 21/28] KVM: x86: Inhibit APICv/AVIC if the optimized physical map is disabled Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 22/28] KVM: SVM: Inhibit AVIC if vCPUs are aliased in logical mode Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 23/28] KVM: SVM: Always update local APIC on writes to logical dest register Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 24/28] KVM: SVM: Update svm->ldr_reg cache even if LDR is "bad" Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 25/28] KVM: SVM: Require logical ID to be power-of-2 for AVIC entry Sean Christopherson
2022-09-20 23:31 ` Sean Christopherson [this message]
2022-09-20 23:31 ` [PATCH v3 27/28] KVM: SVM: Ignore writes to Remote Read Data on AVIC write traps Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 28/28] Revert "KVM: SVM: Do not throw warning when calling avic_vcpu_load on a running vcpu" Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220920233134.940511-27-seanjc@google.com \
--to=seanjc@google.com \
--cc=alejandro.j.jimenez@oracle.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lirongqing@baidu.com \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=suravee.suthikulpanit@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®