From: Maxim Levitsky <mlevitsk@redhat.com>
To: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>,
Sean Christopherson <seanjc@google.com>,
Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
Li RongQing <lirongqing@baidu.com>
Subject: Re: [PATCH v3 05/28] KVM: x86: Don't inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID
Date: Wed, 28 Sep 2022 08:55:18 +0300 [thread overview]
Message-ID: <e5d54876b233dc71a69249c3d02d649da5040a14.camel@redhat.com> (raw)
In-Reply-To: <d02d0b30-f29b-0ff6-98c7-89ddcd091c60@oracle.com>
On Tue, 2022-09-27 at 23:15 -0400, Alejandro Jimenez wrote:
>
> On 9/20/2022 7:31 PM, Sean Christopherson wrote:
> > Truncate the vcpu_id, a.k.a. x2APIC ID, to an 8-bit value when comparing
> > it against the xAPIC ID to avoid false positives (sort of) on systems
> > with >255 CPUs, i.e. with IDs that don't fit into a u8. The intent of
> > APIC_ID_MODIFIED is to inhibit APICv/AVIC when the xAPIC is changed from
> > it's original value,
> >
> > The mismatch isn't technically a false positive, as architecturally the
> > xAPIC IDs do end up being aliased in this scenario, and neither APICv
> > nor AVIC correctly handles IPI virtualization when there is aliasing.
> > However, KVM already deliberately does not honor the aliasing behavior
> > that results when an x2APIC ID gets truncated to an xAPIC ID. I.e. the
> > resulting APICv/AVIC behavior is aligned with KVM's existing behavior
> > when KVM's x2APIC hotplug hack is effectively enabled.
> >
> > If/when KVM provides a way to disable the hotplug hack, APICv/AVIC can
> > piggyback whatever logic disables the optimized APIC map (which is what
> > provides the hotplug hack), i.e. so that KVM's optimized map and APIC
> > virtualization yield the same behavior.
> >
> > For now, fix the immediate problem of APIC virtualization being disabled
> > for large VMs, which is a much more pressing issue than ensuring KVM
> > honors architectural behavior for APIC ID aliasing.
>
> I built a host kernel with this entire series on top of mainline
> v6.0-rc6, and booting a guest with AVIC enabled works as expected on the
> initial boot. The issue is that during the first reboot AVIC is
> inhibited due to APICV_INHIBIT_REASON_APIC_ID_MODIFIED, and I see
> constant inhibition events due to APICV_INHIBIT_REASON_IRQWIN as seen in
APICV_INHIBIT_REASON_IRQWIN is OK, because that happens about every time
the good old PIT timer fires which happens on reboot.
APICV_INHIBIT_REASON_APIC_ID_MODIFIED should not happen as you noted,
this needs investigation.
Best regards,
Maxim Levitsky
> the traces:
>
> qemu-system-x86-10147 [222] ..... 1116.519052:
> kvm_apicv_inhibit_changed: set reason=8, inhibits=0x120
> qemu-system-x86-10147 [222] ..... 1116.519063:
> kvm_apicv_inhibit_changed: cleared reason=8, inhibits=0x20
> qemu-system-x86-10147 [222] ..... 1117.934222:
> kvm_apicv_inhibit_changed: set reason=8, inhibits=0x120
> qemu-system-x86-10147 [222] ..... 1117.934233:
> kvm_apicv_inhibit_changed: cleared reason=8, inhibits=0x20
>
> It happens regardless of vCPU count (tested with 2, 32, 255, 380, and
> 512 vCPUs). This state persists for all subsequent reboots, until the VM
> is terminated. For vCPU counts < 256, when x2apic is disabled the
> problem does not occur, and AVIC continues to work properly after reboots.
>
> I did not see this issue when testing a similar host kernel that did not
> include this current patchset, but instead applied the earlier:
> https://lore.kernel.org/lkml/20220909195442.7660-1-suravee.suthikulpanit@amd.com/
> which inspired this [05/23] patch and the follow up [22/28] in this series.
>
> I am using QEMU built from v7.1.0 upstream tag, plus the patch at:
> https://lore.kernel.org/qemu-devel/20220504131639.13570-1-suravee.suthikulpanit@amd.com/
>
> Please feel free to request any other data points that might be relevant
> and I'll try to collect them.
>
> Alejandro
> > Fixes: 3743c2f02517 ("KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base")
> > Reported-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> > Cc: Maxim Levitsky <mlevitsk@redhat.com>
> > Signed-off-by: Sean Christopherson <seanjc@google.com>
> > ---
> > arch/x86/kvm/lapic.c | 7 ++++++-
> > 1 file changed, 6 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
> > index adac6ca9b7dc..a02defa3f7b5 100644
> > --- a/arch/x86/kvm/lapic.c
> > +++ b/arch/x86/kvm/lapic.c
> > @@ -2075,7 +2075,12 @@ static void kvm_lapic_xapic_id_updated(struct kvm_lapic *apic)
> > if (KVM_BUG_ON(apic_x2apic_mode(apic), kvm))
> > return;
> >
> > - if (kvm_xapic_id(apic) == apic->vcpu->vcpu_id)
> > + /*
> > + * Deliberately truncate the vCPU ID when detecting a modified APIC ID
> > + * to avoid false positives if the vCPU ID, i.e. x2APIC ID, is a 32-bit
> > + * value.
> > + */
> > + if (kvm_xapic_id(apic) == (u8)apic->vcpu->vcpu_id)
> > return;
> >
> > kvm_set_apicv_inhibit(apic->vcpu->kvm, APICV_INHIBIT_REASON_APIC_ID_MODIFIED);
next prev parent reply other threads:[~2022-09-28 5:55 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-20 23:31 [PATCH v3 00/28] KVM: x86: AVIC and local APIC fixes+cleanups Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 01/28] KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 02/28] KVM: x86: Purge "highest ISR" cache when updating APICv state Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 03/28] KVM: SVM: Flush the "current" TLB when activating AVIC Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 04/28] KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 05/28] KVM: x86: Don't inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID Sean Christopherson
2022-09-28 3:15 ` Alejandro Jimenez
2022-09-28 5:55 ` Maxim Levitsky [this message]
2022-09-28 16:51 ` Sean Christopherson
2022-09-28 17:51 ` Maxim Levitsky
2022-09-28 18:03 ` Sean Christopherson
2022-09-28 18:16 ` Maxim Levitsky
2022-09-28 20:44 ` Sean Christopherson
2022-09-28 20:50 ` Alejandro Jimenez
2022-09-20 23:31 ` [PATCH v3 06/28] KVM: x86: Move APIC access page helper to common x86 code Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 07/28] KVM: x86: Inhibit APIC memslot if x2APIC and AVIC are enabled Sean Christopherson
2022-09-23 10:27 ` Maxim Levitsky
2022-09-26 17:00 ` Sean Christopherson
2022-09-28 6:21 ` Maxim Levitsky
2022-09-28 16:33 ` Sean Christopherson
2022-09-28 17:40 ` Maxim Levitsky
2022-09-28 22:35 ` Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 08/28] KVM: SVM: Don't put/load AVIC when setting virtual APIC mode Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 09/28] KVM: SVM: Replace "avic_mode" enum with "x2avic_enabled" boolean Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 10/28] KVM: SVM: Compute dest based on sender's x2APIC status for AVIC kick Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 11/28] KVM: SVM: Fix x2APIC Logical ID calculation for avic_kick_target_vcpus_fast Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 12/28] Revert "KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible" Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 13/28] KVM: SVM: Document that vCPU ID == APIC ID in AVIC kick fastpatch Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 14/28] KVM: SVM: Add helper to perform final AVIC "kick" of single vCPU Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 15/28] KVM: x86: Explicitly skip optimized logical map setup if vCPU's LDR==0 Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 16/28] KVM: x86: Explicitly track all possibilities for APIC map's logical modes Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 17/28] KVM: x86: Skip redundant x2APIC logical mode optimized cluster setup Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 18/28] KVM: x86: Disable APIC logical map if logical ID covers multiple MDAs Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 19/28] KVM: x86: Disable APIC logical map if vCPUs are aliased in logical mode Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 20/28] KVM: x86: Honor architectural behavior for aliased 8-bit APIC IDs Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 21/28] KVM: x86: Inhibit APICv/AVIC if the optimized physical map is disabled Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 22/28] KVM: SVM: Inhibit AVIC if vCPUs are aliased in logical mode Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 23/28] KVM: SVM: Always update local APIC on writes to logical dest register Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 24/28] KVM: SVM: Update svm->ldr_reg cache even if LDR is "bad" Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 25/28] KVM: SVM: Require logical ID to be power-of-2 for AVIC entry Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 26/28] KVM: SVM: Handle multiple logical targets in AVIC kick fastpath Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 27/28] KVM: SVM: Ignore writes to Remote Read Data on AVIC write traps Sean Christopherson
2022-09-20 23:31 ` [PATCH v3 28/28] Revert "KVM: SVM: Do not throw warning when calling avic_vcpu_load on a running vcpu" Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e5d54876b233dc71a69249c3d02d649da5040a14.camel@redhat.com \
--to=mlevitsk@redhat.com \
--cc=alejandro.j.jimenez@oracle.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lirongqing@baidu.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=suravee.suthikulpanit@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®