From: Jan Kara <jack@suse.cz>
To: Yu Kuai <yukuai1@huaweicloud.com>
Cc: hch@infradead.org, jack@suse.cz, axboe@kernel.dk,
linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
yukuai3@huawei.com, yi.zhang@huawei.com, yangerkun@huawei.com
Subject: Re: [PATCH -next RFC 2/3] block: factor out the setting of GD_NEED_PART_SCAN
Date: Thu, 16 Feb 2023 14:17:25 +0100 [thread overview]
Message-ID: <20230216131725.oddv27a7fhz6hx7x@quack3> (raw)
In-Reply-To: <20230212092641.2394146-3-yukuai1@huaweicloud.com>
On Sun 12-02-23 17:26:40, Yu Kuai wrote:
> From: Yu Kuai <yukuai3@huawei.com>
>
> In order to prevent scan partition for a device that is opened
> exclusively by someone else, new conditions will be added to
> disk_scan_partitions() in the next patch. Hence if device is opened
> exclusively between bdev_add() and disk_scan_partitions(), the first
> partition scan will fail unexpected. This patch factor out the setting
> of GD_NEED_PART_SCAN to prevent the problem.
>
> Signed-off-by: Yu Kuai <yukuai3@huawei.com>
I'd rather leave the setting of GD_NEED_PART_SCAN in disk_scan_partitions()
to keep it self-contained. On top of that we can set GD_NEED_PART_SCAN in
device_add_disk() to ensure initial partition scan but we should probably
also make sure flags like GD_SUPPRESS_PART_SCAN or GENHD_FL_NO_PART are not
set to avoid unwanted partition scanning.
Honza
> ---
> block/genhd.c | 2 +-
> block/ioctl.c | 1 +
> 2 files changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/block/genhd.c b/block/genhd.c
> index 075d8da284f5..c0d1220bd798 100644
> --- a/block/genhd.c
> +++ b/block/genhd.c
> @@ -367,7 +367,6 @@ int disk_scan_partitions(struct gendisk *disk, fmode_t mode)
> if (disk->open_partitions)
> return -EBUSY;
>
> - set_bit(GD_NEED_PART_SCAN, &disk->state);
> bdev = blkdev_get_by_dev(disk_devt(disk), mode, NULL);
> if (IS_ERR(bdev))
> return PTR_ERR(bdev);
> @@ -493,6 +492,7 @@ int __must_check device_add_disk(struct device *parent, struct gendisk *disk,
> if (ret)
> goto out_unregister_bdi;
>
> + set_bit(GD_NEED_PART_SCAN, &disk->state);
> bdev_add(disk->part0, ddev->devt);
> if (get_capacity(disk))
> disk_scan_partitions(disk, FMODE_READ);
> diff --git a/block/ioctl.c b/block/ioctl.c
> index 6dd49d877584..0eefcdb936a0 100644
> --- a/block/ioctl.c
> +++ b/block/ioctl.c
> @@ -528,6 +528,7 @@ static int blkdev_common_ioctl(struct block_device *bdev, fmode_t mode,
> return -EACCES;
> if (bdev_is_partition(bdev))
> return -EINVAL;
> + set_bit(GD_NEED_PART_SCAN, &bdev->bd_disk->state);
> return disk_scan_partitions(bdev->bd_disk, mode & ~FMODE_EXCL);
> case BLKTRACESTART:
> case BLKTRACESTOP:
> --
> 2.31.1
>
--
Jan Kara <jack@suse.com>
SUSE Labs, CR
next prev parent reply other threads:[~2023-02-16 13:17 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-12 9:26 [PATCH -next RFC 0/3] block: fix scan partition for exclusively open device again Yu Kuai
2023-02-12 9:26 ` [PATCH -next RFC 1/3] block: Revert "block: Do not reread partition table on exclusively open device" Yu Kuai
2023-02-12 9:26 ` [PATCH -next RFC 2/3] block: factor out the setting of GD_NEED_PART_SCAN Yu Kuai
2023-02-12 11:36 ` Hannes Reinecke
2023-02-13 2:41 ` Yu Kuai
2023-02-16 13:17 ` Jan Kara [this message]
2023-02-17 1:44 ` Yu Kuai
2023-02-12 9:26 ` [PATCH -next RFC 3/3] block: fix scan partition for exclusively open device again Yu Kuai
2023-02-16 13:19 ` Jan Kara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230216131725.oddv27a7fhz6hx7x@quack3 \
--to=jack@suse.cz \
--cc=axboe@kernel.dk \
--cc=hch@infradead.org \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=yangerkun@huawei.com \
--cc=yi.zhang@huawei.com \
--cc=yukuai1@huaweicloud.com \
--cc=yukuai3@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®