From: "Clément Léger" <cleger@rivosinc.com>
To: Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>
Cc: "Clément Léger" <cleger@rivosinc.com>,
"Stafford Horne" <shorne@gmail.com>,
"Brian Cain" <bcain@quicinc.com>,
"Kefeng Wang" <wangkefeng.wang@huawei.com>,
"Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>,
"Michael Ellerman" <mpe@ellerman.id.au>,
"Sunil V L" <sunilvl@ventanamicro.com>,
"Anup Patel" <apatel@ventanamicro.com>,
"Atish Patra" <atishp@rivosinc.com>,
"Andrew Jones" <ajones@ventanamicro.com>,
"Conor Dooley" <conor.dooley@microchip.com>,
"Heiko Stuebner" <heiko@sntech.de>, "Guo Ren" <guoren@kernel.org>,
"Alexandre Ghiti" <alexghiti@rivosinc.com>,
"Masahiro Yamada" <masahiroy@kernel.org>,
"Xianting Tian" <xianting.tian@linux.alibaba.com>,
"Sia Jee Heng" <jeeheng.sia@starfivetech.com>,
"Li Zhengyu" <lizhengyu3@huawei.com>,
"Jisheng Zhang" <jszhang@kernel.org>,
"Gautham R. Shenoy" <gautham.shenoy@amd.com>,
"Mark Rutland" <mark.rutland@arm.com>,
"Peter Zijlstra" <peterz@infradead.org>,
"Marc Zyngier" <maz@kernel.org>,
"Björn Töpel" <bjorn@rivosinc.com>,
"Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org>,
"Evan Green" <evan@rivosinc.com>,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [RFC V2 PATCH 3/9] riscv: add support for misaligned handling in S-mode
Date: Tue, 4 Jul 2023 16:09:18 +0200 [thread overview]
Message-ID: <20230704140924.315594-4-cleger@rivosinc.com> (raw)
In-Reply-To: <20230704140924.315594-1-cleger@rivosinc.com>
Misalignment handling is only supported for M-mode and uses direct
accesses to user memory. in S-mode, this requires to use the
get_user()/put_user() accessors. Implement load_u8(), store_u8() and
get_insn() using these accessors.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
---
arch/riscv/kernel/Makefile | 2 +-
arch/riscv/kernel/traps.c | 7 --
arch/riscv/kernel/traps_misaligned.c | 118 ++++++++++++++++++++++++---
3 files changed, 106 insertions(+), 21 deletions(-)
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index 153864e4f399..79b8dafc699d 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -55,10 +55,10 @@ obj-y += riscv_ksyms.o
obj-y += stacktrace.o
obj-y += cacheinfo.o
obj-y += patch.o
+obj-y += traps_misaligned.o
obj-y += probes/
obj-$(CONFIG_MMU) += vdso.o vdso/
-obj-$(CONFIG_RISCV_M_MODE) += traps_misaligned.o
obj-$(CONFIG_FPU) += fpu.o
obj-$(CONFIG_SMP) += smpboot.o
obj-$(CONFIG_SMP) += smp.o
diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c
index 7fcaf2fd27a1..b2fb2266fb83 100644
--- a/arch/riscv/kernel/traps.c
+++ b/arch/riscv/kernel/traps.c
@@ -149,12 +149,6 @@ DO_ERROR_INFO(do_trap_insn_illegal,
SIGILL, ILL_ILLOPC, "illegal instruction");
DO_ERROR_INFO(do_trap_load_fault,
SIGSEGV, SEGV_ACCERR, "load access fault");
-#ifndef CONFIG_RISCV_M_MODE
-DO_ERROR_INFO(do_trap_load_misaligned,
- SIGBUS, BUS_ADRALN, "Oops - load address misaligned");
-DO_ERROR_INFO(do_trap_store_misaligned,
- SIGBUS, BUS_ADRALN, "Oops - store (or AMO) address misaligned");
-#else
asmlinkage __visible __trap_section void do_trap_load_misaligned(struct pt_regs *regs)
{
@@ -197,7 +191,6 @@ asmlinkage __visible __trap_section void do_trap_store_misaligned(struct pt_regs
irqentry_nmi_exit(regs, state);
}
}
-#endif
DO_ERROR_INFO(do_trap_store_fault,
SIGSEGV, SEGV_ACCERR, "store (or AMO) access fault");
DO_ERROR_INFO(do_trap_ecall_s,
diff --git a/arch/riscv/kernel/traps_misaligned.c b/arch/riscv/kernel/traps_misaligned.c
index 0cccac4822a8..9daed7d756ae 100644
--- a/arch/riscv/kernel/traps_misaligned.c
+++ b/arch/riscv/kernel/traps_misaligned.c
@@ -152,21 +152,25 @@
#define PRECISION_S 0
#define PRECISION_D 1
-static inline u8 load_u8(const u8 *addr)
+#ifdef CONFIG_RISCV_M_MODE
+static inline int load_u8(struct pt_regs *regs, const u8 *addr, u8 *r_val)
{
u8 val;
asm volatile("lbu %0, %1" : "=&r" (val) : "m" (*addr));
+ *r_val = val;
- return val;
+ return 0;
}
-static inline void store_u8(u8 *addr, u8 val)
+static inline int store_u8(struct pt_regs *regs, u8 *addr, u8 val)
{
asm volatile ("sb %0, %1\n" : : "r" (val), "m" (*addr));
+
+ return 0;
}
-static inline ulong get_insn(ulong mepc)
+static inline int get_insn(struct pt_regs *regs, ulong mepc, ulong *r_insn)
{
register ulong __mepc asm ("a2") = mepc;
ulong val, rvc_mask = 3, tmp;
@@ -195,9 +199,87 @@ static inline ulong get_insn(ulong mepc)
: [addr] "r" (__mepc), [rvc_mask] "r" (rvc_mask),
[xlen_minus_16] "i" (XLEN_MINUS_16));
- return val;
+ *r_insn = val;
+
+ return 0;
+}
+#else
+static inline int load_u8(struct pt_regs *regs, const u8 *addr, u8 *r_val)
+{
+ if (user_mode(regs)) {
+ return __get_user(*r_val, addr);
+ } else {
+ *r_val = *addr;
+ return 0;
+ }
}
+static inline int store_u8(struct pt_regs *regs, u8 *addr, u8 val)
+{
+ if (user_mode(regs)) {
+ return __put_user(val, addr);
+ } else {
+ *addr = val;
+ return 0;
+ }
+}
+
+#define __read_insn(regs, insn, insn_addr) \
+({ \
+ int __ret; \
+ \
+ if (user_mode(regs)) { \
+ __ret = __get_user(insn, insn_addr); \
+ } else { \
+ insn = *insn_addr; \
+ __ret = 0; \
+ } \
+ \
+ __ret; \
+})
+
+static inline int get_insn(struct pt_regs *regs, ulong epc, ulong *r_insn)
+{
+ ulong insn = 0;
+
+ if (epc & 0x2) {
+ ulong tmp = 0;
+ u16 __user *insn_addr = (u16 __user *)epc;
+
+ if (__read_insn(regs, insn, insn_addr))
+ return -EFAULT;
+ /* __get_user() uses regular "lw" which sign extend the loaded
+ * value make sure to clear higher order bits in case we "or" it
+ * below with the upper 16 bits half.
+ */
+ insn &= GENMASK(15, 0);
+ if ((insn & __INSN_LENGTH_MASK) != __INSN_LENGTH_32) {
+ *r_insn = insn;
+ return 0;
+ }
+ insn_addr++;
+ if (__read_insn(regs, tmp, insn_addr))
+ return -EFAULT;
+ *r_insn = (tmp << 16) | insn;
+
+ return 0;
+ } else {
+ u32 __user *insn_addr = (u32 __user *)epc;
+
+ if (__read_insn(regs, insn, insn_addr))
+ return -EFAULT;
+ if ((insn & __INSN_LENGTH_MASK) == __INSN_LENGTH_32) {
+ *r_insn = insn;
+ return 0;
+ }
+ insn &= GENMASK(15, 0);
+ *r_insn = insn;
+
+ return 0;
+ }
+}
+#endif
+
union reg_data {
u8 data_bytes[8];
ulong data_ulong;
@@ -208,10 +290,13 @@ int handle_misaligned_load(struct pt_regs *regs)
{
union reg_data val;
unsigned long epc = regs->epc;
- unsigned long insn = get_insn(epc);
- unsigned long addr = csr_read(mtval);
+ unsigned long insn;
+ unsigned long addr = regs->badaddr;
int i, fp = 0, shift = 0, len = 0;
+ if (get_insn(regs, epc, &insn))
+ return -1;
+
regs->epc = 0;
if ((insn & INSN_MASK_LW) == INSN_MATCH_LW) {
@@ -275,8 +360,10 @@ int handle_misaligned_load(struct pt_regs *regs)
}
val.data_u64 = 0;
- for (i = 0; i < len; i++)
- val.data_bytes[i] = load_u8((void *)(addr + i));
+ for (i = 0; i < len; i++) {
+ if (load_u8(regs, (void *)(addr + i), &val.data_bytes[i]))
+ return -1;
+ }
if (fp)
return -1;
@@ -291,10 +378,13 @@ int handle_misaligned_store(struct pt_regs *regs)
{
union reg_data val;
unsigned long epc = regs->epc;
- unsigned long insn = get_insn(epc);
- unsigned long addr = csr_read(mtval);
+ unsigned long insn;
+ unsigned long addr = regs->badaddr;
int i, len = 0;
+ if (get_insn(regs, epc, &insn))
+ return -1;
+
regs->epc = 0;
val.data_ulong = GET_RS2(insn, regs);
@@ -328,8 +418,10 @@ int handle_misaligned_store(struct pt_regs *regs)
return -1;
}
- for (i = 0; i < len; i++)
- store_u8((void *)(addr + i), val.data_bytes[i]);
+ for (i = 0; i < len; i++) {
+ if (store_u8(regs, (void *)(addr + i), val.data_bytes[i]))
+ return -1;
+ }
regs->epc = epc + INSN_LEN(insn);
--
2.40.1
next prev parent reply other threads:[~2023-07-04 14:10 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-04 14:09 [RFC V2 PATCH 0/9] Add support to handle misaligned accesses " Clément Léger
2023-07-04 14:09 ` [RFC V2 PATCH 1/9] riscv: remove unused functions in traps_misaligned.c Clément Léger
2023-07-04 14:09 ` [RFC V2 PATCH 2/9] riscv: avoid missing prototypes warning Clément Léger
2023-07-08 19:34 ` Stafford Horne
2023-07-04 14:09 ` Clément Léger [this message]
2023-07-08 20:08 ` [RFC V2 PATCH 3/9] riscv: add support for misaligned handling in S-mode Stafford Horne
2023-07-04 14:09 ` [RFC V2 PATCH 4/9] riscv: report perf event for misaligned fault Clément Léger
2023-07-04 14:09 ` [RFC V2 PATCH 5/9] riscv: add support for sysctl unaligned_enabled control Clément Léger
2023-07-04 14:09 ` [RFC V2 PATCH 6/9] riscv: add support for SBI misalignment trap delegation Clément Léger
2023-07-04 14:09 ` [RFC V2 PATCH 7/9] riscv: report misaligned accesses emulation to hwprobe Clément Léger
2023-07-04 14:09 ` [RFC V2 PATCH 8/9] riscv: add support for PR_SET_UNALIGN and PR_GET_UNALIGN Clément Léger
2023-07-04 14:09 ` [RFC V2 PATCH 9/9] riscv: add floating point insn support to misaligned access emulation Clément Léger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230704140924.315594-4-cleger@rivosinc.com \
--to=cleger@rivosinc.com \
--cc=ajones@ventanamicro.com \
--cc=alexghiti@rivosinc.com \
--cc=aou@eecs.berkeley.edu \
--cc=apatel@ventanamicro.com \
--cc=atishp@rivosinc.com \
--cc=bcain@quicinc.com \
--cc=bjorn@rivosinc.com \
--cc=conor.dooley@microchip.com \
--cc=evan@rivosinc.com \
--cc=gautham.shenoy@amd.com \
--cc=guoren@kernel.org \
--cc=heiko@sntech.de \
--cc=jeeheng.sia@starfivetech.com \
--cc=jszhang@kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=lizhengyu3@huawei.com \
--cc=mark.rutland@arm.com \
--cc=masahiroy@kernel.org \
--cc=maz@kernel.org \
--cc=mpe@ellerman.id.au \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=peterz@infradead.org \
--cc=rmk+kernel@armlinux.org.uk \
--cc=shorne@gmail.com \
--cc=sunilvl@ventanamicro.com \
--cc=wangkefeng.wang@huawei.com \
--cc=xianting.tian@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®