mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Peter Zijlstra <peterz@infradead.org>
To: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-kernel@vger.kernel.org, tglx@linutronix.de,
	boqun.feng@gmail.com, bristot@redhat.com, bsegall@google.com,
	dietmar.eggemann@arm.com, jstultz@google.com,
	juri.lelli@redhat.com, longman@redhat.com, mgorman@suse.de,
	mingo@redhat.com, rostedt@goodmis.org, swood@redhat.com,
	vincent.guittot@linaro.org, vschneid@redhat.com, will@kernel.org
Subject: Re: [PATCH v3 7/7] locking/rtmutex: Acquire the hb lock via trylock after wait-proxylock.
Date: Mon, 11 Sep 2023 16:11:35 +0200	[thread overview]
Message-ID: <20230911141135.GB9098@noisy.programming.kicks-ass.net> (raw)
In-Reply-To: <20230908162254.999499-8-bigeasy@linutronix.de>

On Fri, Sep 08, 2023 at 06:22:54PM +0200, Sebastian Andrzej Siewior wrote:
> After rt_mutex_wait_proxy_lock() task_struct::pi_blocked_on is cleared
> if current owns the lock. If the operation has been interrupted by a
> signal or timeout then pi_blocked_on can be set. This means spin_lock()
> *can* overwrite pi_blocked_on on PREEMPT_RT. This has been noticed by
> the recently added lockdep-asserts…
> 
> The rt_mutex_cleanup_proxy_lock() operation will clear pi_blocked_on
> (and update pending waiters as expected) but it must happen under the hb
> lock to ensure the same state in rtmutex and userland.
> 
> Given all the possibilities it is probably the simplest option to
> try-lock the hb lock. In case the lock is occupied a quick nap is
> needed. A busy loop can lock up the system if performed by a task with
> high priorioty preventing the owner from running.
> 
> The rt_mutex_post_schedule() needs to be put before try-lock-loop
> because otherwie the schedule() in schedule_hrtimeout() will trip over
> the !sched_rt_mutex assert.
> 
> Introduce futex_trylock_hblock() to try-lock the hb lock and sleep until
> the try-lock operation succeeds. Use it after rt_mutex_wait_proxy_lock()
> to acquire the lock.

Aside from this being just plain gross, this also destroys determinism
of futex_pi, which completely defeats the purpose of the whole thing.


Now.. the reason we need hb->lock at this point is to avoid the
wake_futex_pi() -EAGAIN case.

This happens when futex_top_waiter() and rt_mutex_top_waiter() state
becomes inconsistent. The current rules are such that this inconsistency
will not be observed.

Notably the case that needs to be avoided is where futex_lock_pi() and
futex_unlock_pi() interleave such that unlock will fail to observe a new
waiter.

*However* the case at hand is where a waiter is leaving, in this case
what happens is that we'll fail to observe a waiter that is already
gone, which is harmless afaict.

Would not something like the below work instead?

---
diff --git a/kernel/futex/pi.c b/kernel/futex/pi.c
index ce2889f12375..8c76a52da9bd 100644
--- a/kernel/futex/pi.c
+++ b/kernel/futex/pi.c
@@ -610,29 +610,16 @@ int futex_lock_pi_atomic(u32 __user *uaddr, struct futex_hash_bucket *hb,
 /*
  * Caller must hold a reference on @pi_state.
  */
-static int wake_futex_pi(u32 __user *uaddr, u32 uval, struct futex_pi_state *pi_state)
+static int wake_futex_pi(u32 __user *uaddr, u32 uval,
+			 struct futex_pi_state *pi_state,
+			 rt_mutex_waiter *top_waiter)
 {
-	struct rt_mutex_waiter *top_waiter;
 	struct task_struct *new_owner;
 	bool postunlock = false;
 	DEFINE_RT_WAKE_Q(wqh);
 	u32 curval, newval;
 	int ret = 0;
 
-	top_waiter = rt_mutex_top_waiter(&pi_state->pi_mutex);
-	if (WARN_ON_ONCE(!top_waiter)) {
-		/*
-		 * As per the comment in futex_unlock_pi() this should not happen.
-		 *
-		 * When this happens, give up our locks and try again, giving
-		 * the futex_lock_pi() instance time to complete, either by
-		 * waiting on the rtmutex or removing itself from the futex
-		 * queue.
-		 */
-		ret = -EAGAIN;
-		goto out_unlock;
-	}
-
 	new_owner = top_waiter->task;
 
 	/*
@@ -1039,19 +1026,27 @@ int futex_lock_pi(u32 __user *uaddr, unsigned int flags, ktime_t *time, int tryl
 	ret = rt_mutex_wait_proxy_lock(&q.pi_state->pi_mutex, to, &rt_waiter);
 
 cleanup:
-	spin_lock(q.lock_ptr);
 	/*
 	 * If we failed to acquire the lock (deadlock/signal/timeout), we must
 	 * first acquire the hb->lock before removing the lock from the
 	 * rt_mutex waitqueue, such that we can keep the hb and rt_mutex wait
 	 * lists consistent.
 	 *
-	 * In particular; it is important that futex_unlock_pi() can not
-	 * observe this inconsistency.
+	 * Cannot hold hb->lock because rt_mutex already has a waiter enqueued
+	 * and hb->lock can itself try and enqueue an rt_waiter through rtlock.
+	 *
+	 * Doing the cleanup without holding hb->lock can cause inconsistent
+	 * state between hb and pi_state, but only in the direction of seeing a
+	 * waiter that is leaving.
 	 */
 	if (ret && !rt_mutex_cleanup_proxy_lock(&q.pi_state->pi_mutex, &rt_waiter))
 		ret = 0;
 
+	/*
+	 * Now that the rt_waiter has been dequeued, it is safe to use
+	 * spinlock/rtlock, which will enqueue a new rt_waiter.
+	 */
+	spin_lock(q.lock_ptr);
 no_block:
 	/*
 	 * Fixup the pi_state owner and possibly acquire the lock if we
@@ -1132,6 +1127,7 @@ int futex_unlock_pi(u32 __user *uaddr, unsigned int flags)
 	top_waiter = futex_top_waiter(hb, &key);
 	if (top_waiter) {
 		struct futex_pi_state *pi_state = top_waiter->pi_state;
+		struct rt_mutex_waiter *rt_waiter;
 
 		ret = -EINVAL;
 		if (!pi_state)
@@ -1147,19 +1143,34 @@ int futex_unlock_pi(u32 __user *uaddr, unsigned int flags)
 		get_pi_state(pi_state);
 		/*
 		 * By taking wait_lock while still holding hb->lock, we ensure
-		 * there is no point where we hold neither; and therefore
-		 * wake_futex_p() must observe a state consistent with what we
-		 * observed.
+		 * there is no point where we hold neither; and thereby
+		 * wake_futex_pi() must observe any new waiters.
+		 *
+		 * Since the cleanup: case in futex_lock_pi() removes the
+		 * rt_waiter without holding hb->lock, it is possible for
+		 * wake_futex_pi() to not find a waiter while the above does,
+		 * in this case the waiter is on the way out and it can be
+		 * ignored.
 		 *
 		 * In particular; this forces __rt_mutex_start_proxy() to
 		 * complete such that we're guaranteed to observe the
-		 * rt_waiter. Also see the WARN in wake_futex_pi().
+		 * rt_waiter.
 		 */
 		raw_spin_lock_irq(&pi_state->pi_mutex.wait_lock);
+
+		/*
+		 * Futex vs rt_mutex waiter state -- if there are on rt_mutex
+		 * waiters even though futex thinkgs there are, then the waiter
+		 * is leaving and the uncontended path is safe to take.
+		 */
+		rt_waiter = rt_mutex_top_waiter(&pi_state->pi_mutex);
+		if (!rt_waiter)
+			goto do_uncontended;
+
 		spin_unlock(&hb->lock);
 
 		/* drops pi_state->pi_mutex.wait_lock */
-		ret = wake_futex_pi(uaddr, uval, pi_state);
+		ret = wake_futex_pi(uaddr, uval, pi_state, rt_waiter);
 
 		put_pi_state(pi_state);
 
@@ -1187,6 +1198,7 @@ int futex_unlock_pi(u32 __user *uaddr, unsigned int flags)
 		return ret;
 	}
 
+do_uncontended:
 	/*
 	 * We have no kernel internal state, i.e. no waiters in the
 	 * kernel. Waiters which are about to queue themselves are stuck


  parent reply	other threads:[~2023-09-11 20:53 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-08 16:22 [PATCH v3 0/7] locking/rtmutex: Avoid PI state recursion through sched_submit_work() Sebastian Andrzej Siewior
2023-09-08 16:22 ` [PATCH v3 1/7] sched: Constrain locks in sched_submit_work() Sebastian Andrzej Siewior
2023-09-20  7:36   ` [tip: locking/core] " tip-bot2 for Peter Zijlstra
2023-09-08 16:22 ` [PATCH v3 2/7] locking/rtmutex: Avoid unconditional slowpath for DEBUG_RT_MUTEXES Sebastian Andrzej Siewior
2023-09-20  7:36   ` [tip: locking/core] " tip-bot2 for Sebastian Andrzej Siewior
2023-09-08 16:22 ` [PATCH v3 3/7] sched: Extract __schedule_loop() Sebastian Andrzej Siewior
2023-09-20  7:36   ` [tip: locking/core] " tip-bot2 for Thomas Gleixner
2023-09-08 16:22 ` [PATCH v3 4/7] sched: Provide rt_mutex specific scheduler helpers Sebastian Andrzej Siewior
2023-09-20  7:36   ` [tip: locking/core] " tip-bot2 for Peter Zijlstra
2023-09-08 16:22 ` [PATCH v3 5/7] locking/rtmutex: Use " Sebastian Andrzej Siewior
2023-09-20  7:36   ` [tip: locking/core] " tip-bot2 for Sebastian Andrzej Siewior
2023-09-08 16:22 ` [PATCH v3 6/7] locking/rtmutex: Add a lockdep assert to catch potential nested blocking Sebastian Andrzej Siewior
2023-09-20  7:36   ` [tip: locking/core] " tip-bot2 for Thomas Gleixner
2023-09-08 16:22 ` [PATCH v3 7/7] locking/rtmutex: Acquire the hb lock via trylock after wait-proxylock Sebastian Andrzej Siewior
2023-09-09 18:29   ` Peter Zijlstra
2023-09-11 14:11   ` Peter Zijlstra [this message]
2023-09-12 10:57     ` Peter Zijlstra
2023-09-12 11:26       ` Sebastian Andrzej Siewior
2023-09-12 11:17     ` Sebastian Andrzej Siewior
2023-09-12 11:24       ` Peter Zijlstra
2023-09-12 11:25       ` Sebastian Andrzej Siewior
2023-09-12 11:25       ` Peter Zijlstra
2023-09-12 11:28         ` Sebastian Andrzej Siewior
2023-09-15 12:58     ` Thomas Gleixner
2023-09-15 13:15       ` Sebastian Andrzej Siewior
2023-09-15 15:19       ` Peter Zijlstra
2023-09-15 18:59         ` Thomas Gleixner
2023-09-19 11:03         ` Sebastian Andrzej Siewior
2023-09-20  7:36         ` [tip: locking/core] futex/pi: Fix recursive rt_mutex waiter state tip-bot2 for Peter Zijlstra
2024-01-15 11:40         ` [PATCH v3 7/7] locking/rtmutex: Acquire the hb lock via trylock after wait-proxylock Jiri Slaby
2024-01-15 11:52           ` Jiri Slaby
2024-01-15 12:16             ` Sebastian Andrzej Siewior
2024-01-15 12:54             ` Jiri Slaby
2024-01-15 15:32               ` Yann Ylavic
2024-01-15 18:33               ` Sebastian Andrzej Siewior
2024-01-16  7:07                 ` Jiri Slaby

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230911141135.GB9098@noisy.programming.kicks-ass.net \
    --to=peterz@infradead.org \
    --cc=bigeasy@linutronix.de \
    --cc=boqun.feng@gmail.com \
    --cc=bristot@redhat.com \
    --cc=bsegall@google.com \
    --cc=dietmar.eggemann@arm.com \
    --cc=jstultz@google.com \
    --cc=juri.lelli@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=longman@redhat.com \
    --cc=mgorman@suse.de \
    --cc=mingo@redhat.com \
    --cc=rostedt@goodmis.org \
    --cc=swood@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=vincent.guittot@linaro.org \
    --cc=vschneid@redhat.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®