[PATCH v2 1/8] drm/msm/dpu: don't overwrite CTL_MERGE_3D_ACTIVE register

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

In case of complex pipelines (e.g. the forthcoming quad-pipe) the DPU
might use more that one MERGE_3D block for a single output.  Follow the
pattern and extend the CTL_MERGE_3D_ACTIVE active register instead of
simply writing new value there. Currently at most one MERGE_3D block is
being used, so this has no impact on existing targets.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index 4893f10d6a5832521808c0f4d8b231c356dbdc41..32ab33b314fc44e12ccb935c1695d2eea5c7d9b2 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -548,6 +548,7 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
 	u32 dsc_active = 0;
 	u32 wb_active = 0;
 	u32 mode_sel = 0;
+	u32 merge_3d_active = 0;
 
 	/* CTL_TOP[31:28] carries group_id to collate CTL paths
 	 * per VM. Explicitly disable it until VM support is
@@ -562,6 +563,7 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
 	intf_active = DPU_REG_READ(c, CTL_INTF_ACTIVE);
 	wb_active = DPU_REG_READ(c, CTL_WB_ACTIVE);
 	dsc_active = DPU_REG_READ(c, CTL_DSC_ACTIVE);
+	merge_3d_active = DPU_REG_READ(c, CTL_MERGE_3D_ACTIVE);
 
 	if (cfg->intf)
 		intf_active |= BIT(cfg->intf - INTF_0);
@@ -572,14 +574,14 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
 	if (cfg->dsc)
 		dsc_active |= cfg->dsc;
 
+	if (cfg->merge_3d)
+		merge_3d_active |= BIT(cfg->merge_3d - MERGE_3D_0);
+
 	DPU_REG_WRITE(c, CTL_TOP, mode_sel);
 	DPU_REG_WRITE(c, CTL_INTF_ACTIVE, intf_active);
 	DPU_REG_WRITE(c, CTL_WB_ACTIVE, wb_active);
 	DPU_REG_WRITE(c, CTL_DSC_ACTIVE, dsc_active);
-
-	if (cfg->merge_3d)
-		DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE,
-			      BIT(cfg->merge_3d - MERGE_3D_0));
+	DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE, merge_3d_active);
 
 	if (cfg->cdm)
 		DPU_REG_WRITE(c, CTL_CDM_ACTIVE, cfg->cdm);

-- 
2.39.5