[PATCH v2 0/3] arm64: dts: Add support for Ultratronik i.MX8MP Ultra-MACH SBC

["Goran Rađenović" <goran.radni@gmail.com>]

This patch series adds support for the Ultratronik i.MX8MP-based Ultra-MACH SBC.

The Ultra-MACH SBC is an industrial-grade single-board computer based on the NXP i.MX8M Plus SoC. This initial support includes:

- Updating the MAINTAINERS file to include the new board in the Ultratronik support section.
- Adding a compatible string entry for the board to `fsl.yaml` in device tree bindings.
- Introducing a new device tree source file `imx8mp-ultra-mach-sbc.dts` with basic hardware support.

This series is modeled after the support added for the STM32MP157C-based Ultra-FLY SBC and aims to follow the conventions used for other i.MX8MP boards in mainline..

Changes in v2:
  - Use `enum` with `const:` values in fsl.yaml to correctly represent multiple compatibles.
  - Updated SPI child node name to use the generic `nfc-transceiver` per DT naming conventions.
  - Renamed several peripheral nodes (`crypto@35`, `pmic@25`, etc.) to standard names.
  - Minor formatting cleanup and compliance fixes per review feedback.

Tested on hardware with:
  - Serial console
  - HDMI output via LCDIF pipeline
  - eMMC and SD boot
  - USB gadget and host modes
  - Ethernet and basic SPI/I2C devices

Feedback is welcome.

Goran Rađenović (3):
  MAINTAINERS: Add i.MX8MP Ultra-MACH SBC to ULTRATRONIK BOARD SUPPORT
  dt-bindings: arm: imx8mp: Add Ultratronik Ultra-MACH SBC
  arm64: dts: imx8mp: Add initial support for Ultratronik
    imx8mp-ultra-mach-sbc board

 Documentation/devicetree/bindings/arm/fsl.yaml |   6 +
 MAINTAINERS                                    |   1 +
 arch/arm64/boot/dts/freescale/Makefile         |   1 +
 arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts | 909 ++++++++++++++++++
 4 files changed, 917 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts

base-commit: cd2e103d57e5615f9bb027d772f93b9efd567224
-- 
2.43.0