From: Goran Radenovic <goran.radni@gmail.com>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: boerge.struempfel@gmail.com, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/3] dt-bindings: arm: imx8mp: Add Ultratronik Ultra-MACH SBC
Date: Thu, 12 Jun 2025 12:09:49 +0200 [thread overview]
Message-ID: <26194c8d-c16f-4293-8c0f-5c674e09a1ba@gmail.com> (raw)
In-Reply-To: <20250612-snobbish-outrageous-nyala-dca804@kuoka>
Hi Krzysztof,
Thanks for the feedback, and you're absolutely right — I made a mistake
here.
That said, I’m still a bit confused by your earlier comment:
"That's just part of the standard/first enum."
I’m introducing a new board from a new manufacturer, so I expected to
add a new enum block — similar to how it's done for other vendor entries
in the same file. I ran dt_binding_check, and it passed without errors
for this structure.
Could you clarify which “standard/first enum” you were referring to?
Should all i.MX8MP-based boards share a single enum block, regardless of
vendor?
Thanks again for your guidance.
Best regards,
Goran
Krzysztof Kozlowski wrote:
> On Wed, Jun 11, 2025 at 01:30:37PM GMT, Goran Rađenović wrote:
>> Document the Ultratronik Ultra-MACH SBC, based on the NXP i.MX8MP SoC.
>>
>> This board is manufactured by Ultratronik GmbH and uses the compatible
>> string "ux,imx8mp-ultra-mach-sbc".
>>
>> Signed-off-by: Goran Rađenović <goran.radni@gmail.com>
>> ---
>> Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
>> index d3b5e6923e41..132a6f39b59a 100644
>> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
>> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
>> @@ -1232,6 +1232,12 @@ properties:
>> - const: tq,imx8mp-tqma8mpql # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM
>> - const: fsl,imx8mp
>>
>> + - description: Ultratronik SBC i.MX8MP based boards
>> + items:
>> + - enum:
>
> Nothing improved... got actually worse, because you never tested it.
>
> ^
> |
> Look here. This is '+' means you added it. My previous comment was that
> it should be part of previous enum. If you add enum, then it is not part
> of previous, right?
>
> Best regards,
> Krzysztof
>
next prev parent reply other threads:[~2025-06-12 10:09 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-11 11:30 [PATCH v2 0/3] arm64: dts: Add support for Ultratronik i.MX8MP " Goran Rađenović
2025-06-11 11:30 ` [PATCH v2 1/3] MAINTAINERS: Add i.MX8MP Ultra-MACH SBC to ULTRATRONIK BOARD SUPPORT Goran Rađenović
2025-06-11 11:30 ` [PATCH v2 2/3] dt-bindings: arm: imx8mp: Add Ultratronik Ultra-MACH SBC Goran Rađenović
2025-06-12 0:07 ` Rob Herring (Arm)
2025-06-12 7:09 ` Krzysztof Kozlowski
2025-06-12 10:09 ` Goran Radenovic [this message]
2025-06-12 11:01 ` Krzysztof Kozlowski
2025-06-20 8:53 ` Goran Radenovic
2025-06-11 11:30 ` [PATCH v2 3/3] arm64: dts: imx8mp: Add initial support for Ultratronik imx8mp-ultra-mach-sbc board Goran Rađenović
2025-06-11 15:34 ` Frank Li
2025-06-20 9:58 ` Goran Radenovic
2025-06-11 13:11 ` [PATCH v2 0/3] arm64: dts: Add support for Ultratronik i.MX8MP Ultra-MACH SBC Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=26194c8d-c16f-4293-8c0f-5c674e09a1ba@gmail.com \
--to=goran.radni@gmail.com \
--cc=boerge.struempfel@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®