From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v2 00/24] PCI: Bridge window selection improvements
Date: Fri, 29 Aug 2025 16:10:49 +0300 [thread overview]
Message-ID: <20250829131113.36754-1-ilpo.jarvinen@linux.intel.com> (raw)
This series is based on top of the three resource fitting and assignment
algorithm fixes already in the pci/resource branch. I've tried to compare
these patch with the commits in the pci/resource branch to retain the minor
spelling/grammar corrections Bjorn made while applying v1.
v2 is just to fix two small issues within the series intermediate patches.
These corrections attempt to ensure this series is bisectable if
troubleshooting requires that in the future.
In addition, a few corrections to changelog texts were made.
I'm left to wonder though if the added double spaces after some stops
within the commit messages in the pci/resource branch were intentional or
not (I did remove them for v2).
As the changes are very minimal, I'm only sending this to lists and Bjorn
to spare people's inboxes. If somebody provides a Tested-by tag for v1, it
should be counted in for this v2 (v1 vs v2 difference does not matter if
testing the entire series).
v2:
- In pci_bridge_release_resources():
- Keep type assignment in until removing the type hack.
- Introduce res_name in the patch it is used avoid compiler warning
about unused variable. Place it into the block that needs it.
- Minor corrections to changelog texts
Ilpo Järvinen (24):
m68k/PCI: Use pci_enable_resources() in pcibios_enable_device()
sparc/PCI: Remove pcibios_enable_device() as they do nothing extra
MIPS: PCI: Use pci_enable_resources()
PCI: Move find_bus_resource_of_type() earlier
PCI: Refactor find_bus_resource_of_type() logic checks
PCI: Always claim bridge window before its setup
PCI: Disable non-claimed bridge window
PCI: Use pci_release_resource() instead of release_resource()
PCI: Enable bridge even if bridge window fails to assign
PCI: Preserve bridge window resource type flags
PCI: Add defines for bridge window indexing
PCI: Add bridge window selection functions
PCI: Fix finding bridge window in pci_reassign_bridge_resources()
PCI: Warn if bridge window cannot be released when resizing BAR
PCI: Use pbus_select_window() during BAR resize
PCI: Use pbus_select_window_for_type() during IO window sizing
PCI: Rename resource variable from r to res
PCI: Use pbus_select_window() in space available checker
PCI: Use pbus_select_window_for_type() during mem window sizing
PCI: Refactor distributing available memory to use loops
PCI: Refactor remove_dev_resources() to use pbus_select_window()
PCI: Add pci_setup_one_bridge_window()
PCI: Pass bridge window to pci_bus_release_bridge_resources()
PCI: Alter misleading recursion to pci_bus_release_bridge_resources()
arch/m68k/kernel/pcibios.c | 39 +-
arch/mips/pci/pci-legacy.c | 38 +-
arch/sparc/kernel/leon_pci.c | 27 --
arch/sparc/kernel/pci.c | 27 --
arch/sparc/kernel/pcic.c | 27 --
drivers/pci/bus.c | 3 +
drivers/pci/pci-sysfs.c | 27 +-
drivers/pci/pci.h | 8 +-
drivers/pci/probe.c | 35 +-
drivers/pci/setup-bus.c | 798 ++++++++++++++++++-----------------
drivers/pci/setup-res.c | 46 +-
include/linux/pci.h | 5 +-
12 files changed, 504 insertions(+), 576 deletions(-)
base-commit: 295524c65d8b4850efbb809f12176eb1262a5aba
--
2.39.5
next reply other threads:[~2025-08-29 13:11 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-29 13:10 Ilpo Järvinen [this message]
2025-08-29 13:10 ` [PATCH v2 01/24] m68k/PCI: Use pci_enable_resources() in pcibios_enable_device() Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 02/24] sparc/PCI: Remove pcibios_enable_device() as they do nothing extra Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 03/24] MIPS: PCI: Use pci_enable_resources() Ilpo Järvinen
2025-10-13 19:54 ` Guenter Roeck
2025-10-13 21:02 ` Bjorn Helgaas
2025-10-28 22:45 ` Bjorn Helgaas
2025-10-13 21:17 ` Thomas Bogendoerfer
2025-10-13 23:00 ` Maciej W. Rozycki
2025-10-14 10:54 ` Ilpo Järvinen
2025-10-14 12:22 ` Maciej W. Rozycki
2025-10-14 12:41 ` Ilpo Järvinen
2025-10-14 12:58 ` Maciej W. Rozycki
2025-10-17 10:49 ` Thomas Bogendoerfer
2025-10-17 10:58 ` Ilpo Järvinen
2025-10-17 12:11 ` Thomas Bogendoerfer
2025-10-18 21:32 ` Maciej W. Rozycki
2025-08-29 13:10 ` [PATCH v2 04/24] PCI: Move find_bus_resource_of_type() earlier Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 05/24] PCI: Refactor find_bus_resource_of_type() logic checks Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 06/24] PCI: Always claim bridge window before its setup Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 07/24] PCI: Disable non-claimed bridge window Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 08/24] PCI: Use pci_release_resource() instead of release_resource() Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 09/24] PCI: Enable bridge even if bridge window fails to assign Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 10/24] PCI: Preserve bridge window resource type flags Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 11/24] PCI: Add defines for bridge window indexing Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 12/24] PCI: Add bridge window selection functions Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 13/24] PCI: Fix finding bridge window in pci_reassign_bridge_resources() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 14/24] PCI: Warn if bridge window cannot be released when resizing BAR Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 15/24] PCI: Use pbus_select_window() during BAR resize Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 16/24] PCI: Use pbus_select_window_for_type() during IO window sizing Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 17/24] PCI: Rename resource variable from r to res Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 18/24] PCI: Use pbus_select_window() in space available checker Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 19/24] PCI: Use pbus_select_window_for_type() during mem window sizing Ilpo Järvinen
2025-10-18 8:14 ` WARNING at drivers/pci/setup-bus.c:2373, bisected to "PCI: Use pbus_select_window_for_type() during mem window sizing" Klaus Kudielka
2025-10-25 10:11 ` Klaus Kudielka
2025-10-25 12:44 ` Klaus Kudielka
2025-10-27 13:29 ` Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 20/24] PCI: Refactor distributing available memory to use loops Ilpo Järvinen
2025-10-08 14:47 ` john_chen_chn
2025-08-29 13:11 ` [PATCH v2 21/24] PCI: Refactor remove_dev_resources() to use pbus_select_window() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 22/24] PCI: Add pci_setup_one_bridge_window() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 23/24] PCI: Pass bridge window to pci_bus_release_bridge_resources() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 24/24] PCI: Alter misleading recursion " Ilpo Järvinen
2025-09-16 16:02 ` [PATCH v2 00/24] PCI: Bridge window selection improvements Ilpo Järvinen
2025-09-16 16:23 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250829131113.36754-1-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®