From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v2 08/24] PCI: Use pci_release_resource() instead of release_resource()
Date: Fri, 29 Aug 2025 16:10:57 +0300 [thread overview]
Message-ID: <20250829131113.36754-9-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20250829131113.36754-1-ilpo.jarvinen@linux.intel.com>
A few places in setup-bus.c call release_resource() directly and end up
duplicating functionality from pci_release_resource() such as parent check,
logging, and clearing the resource. Worse yet, the way the resource is
cleared is inconsistent between different sites.
Convert release_resource() calls into pci_release_resource() to remove code
duplication. This will also make the resource start, end, and flags
behavior consistent, i.e., start address is cleared, and only
IORESOURCE_UNSET is asserted for the resource.
While at it, eliminate the unnecessary initialization of idx variable in
pci_bridge_release_resources().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/pci/setup-bus.c | 46 +++++++++++++----------------------------
drivers/pci/setup-res.c | 11 +++++++---
include/linux/pci.h | 2 +-
3 files changed, 23 insertions(+), 36 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 6bdc1af887da..b62465665abc 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -473,8 +473,6 @@ static void __assign_resources_sorted(struct list_head *head,
struct pci_dev_resource *dev_res, *tmp_res, *dev_res2;
struct resource *res;
struct pci_dev *dev;
- const char *res_name;
- int idx;
unsigned long fail_type;
resource_size_t add_align, align;
@@ -582,14 +580,7 @@ static void __assign_resources_sorted(struct list_head *head,
res = dev_res->res;
dev = dev_res->dev;
- if (!res->parent)
- continue;
-
- idx = pci_resource_num(dev, res);
- res_name = pci_resource_name(dev, idx);
- pci_dbg(dev, "%s %pR: releasing\n", res_name, res);
-
- release_resource(res);
+ pci_release_resource(dev, pci_resource_num(dev, res));
restore_dev_resource(dev_res);
}
/* Restore start/end/flags from saved list */
@@ -1732,7 +1723,7 @@ static void pci_bridge_release_resources(struct pci_bus *bus,
struct resource *r;
unsigned int old_flags;
struct resource *b_res;
- int idx = 1;
+ int idx, ret;
b_res = &dev->resource[PCI_BRIDGE_RESOURCES];
@@ -1766,21 +1757,18 @@ static void pci_bridge_release_resources(struct pci_bus *bus,
/* If there are children, release them all */
release_child_resources(r);
- if (!release_resource(r)) {
- type = old_flags = r->flags & PCI_RES_TYPE_MASK;
- pci_info(dev, "resource %d %pR released\n",
- PCI_BRIDGE_RESOURCES + idx, r);
- /* Keep the old size */
- resource_set_range(r, 0, resource_size(r));
- r->flags = 0;
- /* Avoiding touch the one without PREF */
- if (type & IORESOURCE_PREFETCH)
- type = IORESOURCE_PREFETCH;
- __pci_setup_bridge(bus, type);
- /* For next child res under same bridge */
- r->flags = old_flags;
- }
+ type = old_flags = r->flags & PCI_RES_TYPE_MASK;
+ ret = pci_release_resource(dev, PCI_BRIDGE_RESOURCES + idx);
+ if (ret)
+ return;
+
+ /* Avoiding touch the one without PREF */
+ if (type & IORESOURCE_PREFETCH)
+ type = IORESOURCE_PREFETCH;
+ __pci_setup_bridge(bus, type);
+ /* For next child res under same bridge */
+ r->flags = old_flags;
}
enum release_type {
@@ -2425,7 +2413,6 @@ int pci_reassign_bridge_resources(struct pci_dev *bridge, unsigned long type)
for (i = PCI_BRIDGE_RESOURCES; i < PCI_BRIDGE_RESOURCE_END;
i++) {
struct resource *res = &bridge->resource[i];
- const char *res_name = pci_resource_name(bridge, i);
if ((res->flags ^ type) & PCI_RES_TYPE_MASK)
continue;
@@ -2438,12 +2425,7 @@ int pci_reassign_bridge_resources(struct pci_dev *bridge, unsigned long type)
if (ret)
goto cleanup;
- pci_info(bridge, "%s %pR: releasing\n", res_name, res);
-
- if (res->parent)
- release_resource(res);
- res->start = 0;
- res->end = 0;
+ pci_release_resource(bridge, i);
break;
}
if (i == PCI_BRIDGE_RESOURCE_END)
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index d2b3ed51e880..0468c058b598 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -406,20 +406,25 @@ int pci_reassign_resource(struct pci_dev *dev, int resno,
return 0;
}
-void pci_release_resource(struct pci_dev *dev, int resno)
+int pci_release_resource(struct pci_dev *dev, int resno)
{
struct resource *res = pci_resource_n(dev, resno);
const char *res_name = pci_resource_name(dev, resno);
+ int ret;
if (!res->parent)
- return;
+ return 0;
pci_info(dev, "%s %pR: releasing\n", res_name, res);
- release_resource(res);
+ ret = release_resource(res);
+ if (ret)
+ return ret;
res->end = resource_size(res) - 1;
res->start = 0;
res->flags |= IORESOURCE_UNSET;
+
+ return 0;
}
EXPORT_SYMBOL(pci_release_resource);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 59876de13860..275df4058767 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1417,7 +1417,7 @@ void pci_reset_secondary_bus(struct pci_dev *dev);
void pcibios_reset_secondary_bus(struct pci_dev *dev);
void pci_update_resource(struct pci_dev *dev, int resno);
int __must_check pci_assign_resource(struct pci_dev *dev, int i);
-void pci_release_resource(struct pci_dev *dev, int resno);
+int pci_release_resource(struct pci_dev *dev, int resno);
static inline int pci_rebar_bytes_to_size(u64 bytes)
{
bytes = roundup_pow_of_two(bytes);
--
2.39.5
next prev parent reply other threads:[~2025-08-29 13:12 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-29 13:10 [PATCH v2 00/24] PCI: Bridge window selection improvements Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 01/24] m68k/PCI: Use pci_enable_resources() in pcibios_enable_device() Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 02/24] sparc/PCI: Remove pcibios_enable_device() as they do nothing extra Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 03/24] MIPS: PCI: Use pci_enable_resources() Ilpo Järvinen
2025-10-13 19:54 ` Guenter Roeck
2025-10-13 21:02 ` Bjorn Helgaas
2025-10-28 22:45 ` Bjorn Helgaas
2025-10-13 21:17 ` Thomas Bogendoerfer
2025-10-13 23:00 ` Maciej W. Rozycki
2025-10-14 10:54 ` Ilpo Järvinen
2025-10-14 12:22 ` Maciej W. Rozycki
2025-10-14 12:41 ` Ilpo Järvinen
2025-10-14 12:58 ` Maciej W. Rozycki
2025-10-17 10:49 ` Thomas Bogendoerfer
2025-10-17 10:58 ` Ilpo Järvinen
2025-10-17 12:11 ` Thomas Bogendoerfer
2025-10-18 21:32 ` Maciej W. Rozycki
2025-08-29 13:10 ` [PATCH v2 04/24] PCI: Move find_bus_resource_of_type() earlier Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 05/24] PCI: Refactor find_bus_resource_of_type() logic checks Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 06/24] PCI: Always claim bridge window before its setup Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 07/24] PCI: Disable non-claimed bridge window Ilpo Järvinen
2025-08-29 13:10 ` Ilpo Järvinen [this message]
2025-08-29 13:10 ` [PATCH v2 09/24] PCI: Enable bridge even if bridge window fails to assign Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 10/24] PCI: Preserve bridge window resource type flags Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 11/24] PCI: Add defines for bridge window indexing Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 12/24] PCI: Add bridge window selection functions Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 13/24] PCI: Fix finding bridge window in pci_reassign_bridge_resources() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 14/24] PCI: Warn if bridge window cannot be released when resizing BAR Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 15/24] PCI: Use pbus_select_window() during BAR resize Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 16/24] PCI: Use pbus_select_window_for_type() during IO window sizing Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 17/24] PCI: Rename resource variable from r to res Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 18/24] PCI: Use pbus_select_window() in space available checker Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 19/24] PCI: Use pbus_select_window_for_type() during mem window sizing Ilpo Järvinen
2025-10-18 8:14 ` WARNING at drivers/pci/setup-bus.c:2373, bisected to "PCI: Use pbus_select_window_for_type() during mem window sizing" Klaus Kudielka
2025-10-25 10:11 ` Klaus Kudielka
2025-10-25 12:44 ` Klaus Kudielka
2025-10-27 13:29 ` Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 20/24] PCI: Refactor distributing available memory to use loops Ilpo Järvinen
2025-10-08 14:47 ` john_chen_chn
2025-08-29 13:11 ` [PATCH v2 21/24] PCI: Refactor remove_dev_resources() to use pbus_select_window() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 22/24] PCI: Add pci_setup_one_bridge_window() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 23/24] PCI: Pass bridge window to pci_bus_release_bridge_resources() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 24/24] PCI: Alter misleading recursion " Ilpo Järvinen
2025-09-16 16:02 ` [PATCH v2 00/24] PCI: Bridge window selection improvements Ilpo Järvinen
2025-09-16 16:23 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250829131113.36754-9-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®