From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v2 01/24] m68k/PCI: Use pci_enable_resources() in pcibios_enable_device()
Date: Fri, 29 Aug 2025 16:10:50 +0300 [thread overview]
Message-ID: <20250829131113.36754-2-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20250829131113.36754-1-ilpo.jarvinen@linux.intel.com>
m68k has a resource enable (check) loop in its pcibios_enable_device()
which for some reason differs from pci_enable_resources(). This could lead
to inconsistencies in behavior, especially now as pci_enable_resources()
and the bridge window resource flags behavior are going to be altered by
upcoming changes.
The check for !r->start && r->end is already covered by the more generic
checks done in pci_enable_resources().
The entire pcibios_enable_device() suspiciously looks copy-paste from some
other arch as also indicated by the preceding comment. However, it also
enables PCI_COMMAND_IO | PCI_COMMAND_MEMORY always for bridges. It is not
clear why that is being done as the commit e93a6bbeb5a5 ("m68k: common PCI
support definitions and code") introducing this code states "Nothing
specific to any PCI implementation in any m68k class CPU hardware yet".
Replace the resource enable loop with a call to pci_enable_resources() and
adjust the Command Register afterwards as it's unclear if that is necessary
or not so keep it for now.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
arch/m68k/kernel/pcibios.c | 39 +++++++++++---------------------------
1 file changed, 11 insertions(+), 28 deletions(-)
diff --git a/arch/m68k/kernel/pcibios.c b/arch/m68k/kernel/pcibios.c
index 9504eb19d73a..e6ab3f9ff5d8 100644
--- a/arch/m68k/kernel/pcibios.c
+++ b/arch/m68k/kernel/pcibios.c
@@ -44,41 +44,24 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
*/
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
- struct resource *r;
u16 cmd, newcmd;
- int idx;
+ int ret;
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- newcmd = cmd;
-
- for (idx = 0; idx < 6; idx++) {
- /* Only set up the requested stuff */
- if (!(mask & (1 << idx)))
- continue;
-
- r = dev->resource + idx;
- if (!r->start && r->end) {
- pr_err("PCI: Device %s not available because of resource collisions\n",
- pci_name(dev));
- return -EINVAL;
- }
- if (r->flags & IORESOURCE_IO)
- newcmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- newcmd |= PCI_COMMAND_MEMORY;
- }
+ ret = pci_enable_resources(dev, mask);
+ if (ret < 0)
+ return ret;
/*
* Bridges (eg, cardbus bridges) need to be fully enabled
*/
- if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
+ if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) {
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
newcmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-
-
- if (newcmd != cmd) {
- pr_info("PCI: enabling device %s (0x%04x -> 0x%04x)\n",
- pci_name(dev), cmd, newcmd);
- pci_write_config_word(dev, PCI_COMMAND, newcmd);
+ if (newcmd != cmd) {
+ pr_info("PCI: enabling bridge %s (0x%04x -> 0x%04x)\n",
+ pci_name(dev), cmd, newcmd);
+ pci_write_config_word(dev, PCI_COMMAND, newcmd);
+ }
}
return 0;
}
--
2.39.5
next prev parent reply other threads:[~2025-08-29 13:11 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-29 13:10 [PATCH v2 00/24] PCI: Bridge window selection improvements Ilpo Järvinen
2025-08-29 13:10 ` Ilpo Järvinen [this message]
2025-08-29 13:10 ` [PATCH v2 02/24] sparc/PCI: Remove pcibios_enable_device() as they do nothing extra Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 03/24] MIPS: PCI: Use pci_enable_resources() Ilpo Järvinen
2025-10-13 19:54 ` Guenter Roeck
2025-10-13 21:02 ` Bjorn Helgaas
2025-10-28 22:45 ` Bjorn Helgaas
2025-10-13 21:17 ` Thomas Bogendoerfer
2025-10-13 23:00 ` Maciej W. Rozycki
2025-10-14 10:54 ` Ilpo Järvinen
2025-10-14 12:22 ` Maciej W. Rozycki
2025-10-14 12:41 ` Ilpo Järvinen
2025-10-14 12:58 ` Maciej W. Rozycki
2025-10-17 10:49 ` Thomas Bogendoerfer
2025-10-17 10:58 ` Ilpo Järvinen
2025-10-17 12:11 ` Thomas Bogendoerfer
2025-10-18 21:32 ` Maciej W. Rozycki
2025-08-29 13:10 ` [PATCH v2 04/24] PCI: Move find_bus_resource_of_type() earlier Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 05/24] PCI: Refactor find_bus_resource_of_type() logic checks Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 06/24] PCI: Always claim bridge window before its setup Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 07/24] PCI: Disable non-claimed bridge window Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 08/24] PCI: Use pci_release_resource() instead of release_resource() Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 09/24] PCI: Enable bridge even if bridge window fails to assign Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 10/24] PCI: Preserve bridge window resource type flags Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 11/24] PCI: Add defines for bridge window indexing Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 12/24] PCI: Add bridge window selection functions Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 13/24] PCI: Fix finding bridge window in pci_reassign_bridge_resources() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 14/24] PCI: Warn if bridge window cannot be released when resizing BAR Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 15/24] PCI: Use pbus_select_window() during BAR resize Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 16/24] PCI: Use pbus_select_window_for_type() during IO window sizing Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 17/24] PCI: Rename resource variable from r to res Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 18/24] PCI: Use pbus_select_window() in space available checker Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 19/24] PCI: Use pbus_select_window_for_type() during mem window sizing Ilpo Järvinen
2025-10-18 8:14 ` WARNING at drivers/pci/setup-bus.c:2373, bisected to "PCI: Use pbus_select_window_for_type() during mem window sizing" Klaus Kudielka
2025-10-25 10:11 ` Klaus Kudielka
2025-10-25 12:44 ` Klaus Kudielka
2025-10-27 13:29 ` Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 20/24] PCI: Refactor distributing available memory to use loops Ilpo Järvinen
2025-10-08 14:47 ` john_chen_chn
2025-08-29 13:11 ` [PATCH v2 21/24] PCI: Refactor remove_dev_resources() to use pbus_select_window() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 22/24] PCI: Add pci_setup_one_bridge_window() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 23/24] PCI: Pass bridge window to pci_bus_release_bridge_resources() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 24/24] PCI: Alter misleading recursion " Ilpo Järvinen
2025-09-16 16:02 ` [PATCH v2 00/24] PCI: Bridge window selection improvements Ilpo Järvinen
2025-09-16 16:23 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250829131113.36754-2-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®