From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v2 06/24] PCI: Always claim bridge window before its setup
Date: Fri, 29 Aug 2025 16:10:55 +0300 [thread overview]
Message-ID: <20250829131113.36754-7-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20250829131113.36754-1-ilpo.jarvinen@linux.intel.com>
When the claim of a resource fails for the full range in
pci_claim_bridge_resource(), clipping the resource to a smaller size is
attempted. If clipping is successful, the new bridge window is programmed
and only as the last step the code attempts to claim the resource again.
The order of the last two steps is slightly illogical and inconsistent with
the assignment call chains.
If claiming the bridge window after clipping fails, the bridge window that
was set up is left in place.
Rework the logic such that the bridge window is claimed before calling the
relevant bridge setup function. This make the behavior consistent with
resource fitting call chains that always assign the bridge window before
programming it.
If claiming the bridge window fails, the clipped bridge window is no longer
set up but pci_claim_bridge_resource() returns without writing the bridge
window at all.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/pci/setup-bus.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index c5fc4e2825be..b477f68b236c 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -857,9 +857,16 @@ int pci_claim_bridge_resource(struct pci_dev *bridge, int i)
if ((bridge->class >> 8) != PCI_CLASS_BRIDGE_PCI)
return 0;
+ if (i > PCI_BRIDGE_PREF_MEM_WINDOW)
+ return -EINVAL;
+
+ /* Try to clip the resource and claim the smaller window */
if (!pci_bus_clip_resource(bridge, i))
return -EINVAL; /* Clipping didn't change anything */
+ if (!pci_claim_resource(bridge, i))
+ return -EINVAL;
+
switch (i) {
case PCI_BRIDGE_IO_WINDOW:
pci_setup_bridge_io(bridge);
@@ -874,10 +881,7 @@ int pci_claim_bridge_resource(struct pci_dev *bridge, int i)
return -EINVAL;
}
- if (pci_claim_resource(bridge, i) == 0)
- return 0; /* Claimed a smaller window */
-
- return -EINVAL;
+ return 0;
}
/*
--
2.39.5
next prev parent reply other threads:[~2025-08-29 13:12 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-29 13:10 [PATCH v2 00/24] PCI: Bridge window selection improvements Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 01/24] m68k/PCI: Use pci_enable_resources() in pcibios_enable_device() Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 02/24] sparc/PCI: Remove pcibios_enable_device() as they do nothing extra Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 03/24] MIPS: PCI: Use pci_enable_resources() Ilpo Järvinen
2025-10-13 19:54 ` Guenter Roeck
2025-10-13 21:02 ` Bjorn Helgaas
2025-10-28 22:45 ` Bjorn Helgaas
2025-10-13 21:17 ` Thomas Bogendoerfer
2025-10-13 23:00 ` Maciej W. Rozycki
2025-10-14 10:54 ` Ilpo Järvinen
2025-10-14 12:22 ` Maciej W. Rozycki
2025-10-14 12:41 ` Ilpo Järvinen
2025-10-14 12:58 ` Maciej W. Rozycki
2025-10-17 10:49 ` Thomas Bogendoerfer
2025-10-17 10:58 ` Ilpo Järvinen
2025-10-17 12:11 ` Thomas Bogendoerfer
2025-10-18 21:32 ` Maciej W. Rozycki
2025-08-29 13:10 ` [PATCH v2 04/24] PCI: Move find_bus_resource_of_type() earlier Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 05/24] PCI: Refactor find_bus_resource_of_type() logic checks Ilpo Järvinen
2025-08-29 13:10 ` Ilpo Järvinen [this message]
2025-08-29 13:10 ` [PATCH v2 07/24] PCI: Disable non-claimed bridge window Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 08/24] PCI: Use pci_release_resource() instead of release_resource() Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 09/24] PCI: Enable bridge even if bridge window fails to assign Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 10/24] PCI: Preserve bridge window resource type flags Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 11/24] PCI: Add defines for bridge window indexing Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 12/24] PCI: Add bridge window selection functions Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 13/24] PCI: Fix finding bridge window in pci_reassign_bridge_resources() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 14/24] PCI: Warn if bridge window cannot be released when resizing BAR Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 15/24] PCI: Use pbus_select_window() during BAR resize Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 16/24] PCI: Use pbus_select_window_for_type() during IO window sizing Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 17/24] PCI: Rename resource variable from r to res Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 18/24] PCI: Use pbus_select_window() in space available checker Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 19/24] PCI: Use pbus_select_window_for_type() during mem window sizing Ilpo Järvinen
2025-10-18 8:14 ` WARNING at drivers/pci/setup-bus.c:2373, bisected to "PCI: Use pbus_select_window_for_type() during mem window sizing" Klaus Kudielka
2025-10-25 10:11 ` Klaus Kudielka
2025-10-25 12:44 ` Klaus Kudielka
2025-10-27 13:29 ` Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 20/24] PCI: Refactor distributing available memory to use loops Ilpo Järvinen
2025-10-08 14:47 ` john_chen_chn
2025-08-29 13:11 ` [PATCH v2 21/24] PCI: Refactor remove_dev_resources() to use pbus_select_window() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 22/24] PCI: Add pci_setup_one_bridge_window() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 23/24] PCI: Pass bridge window to pci_bus_release_bridge_resources() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 24/24] PCI: Alter misleading recursion " Ilpo Järvinen
2025-09-16 16:02 ` [PATCH v2 00/24] PCI: Bridge window selection improvements Ilpo Järvinen
2025-09-16 16:23 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250829131113.36754-7-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®