[PATCH v2 04/13] arm64: dts: qcom: lemans-evk: Add nvmem-layout for EEPROM

[Wasim Nazir <wasim.nazir@oss.qualcomm.com>]

From: Monish Chunara <quic_mchunara@quicinc.com>

Define the nvmem layout on the EEPROM connected via I2C to enable
structured storage and access to board-specific configuration data,
such as MAC addresses for Ethernet.

Signed-off-by: Monish Chunara <quic_mchunara@quicinc.com>
Signed-off-by: Wasim Nazir <wasim.nazir@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/lemans-evk.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
index 753c5afc3342..c60629c3369e 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -307,6 +307,18 @@ expander3: gpio@3b {
 		gpio-controller;
 		reg = <0x3b>;
 	};
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
 };
 
 &mdss0 {

-- 
2.51.0