Re: [PATCH v2 06/13] arm64: dts: qcom: lemans-evk: Enable PCIe support

[Wasim Nazir <wasim.nazir@oss.qualcomm.com>]

On Wed, Sep 03, 2025 at 05:50:00PM +0200, Konrad Dybcio wrote:
> On 9/3/25 1:47 PM, Wasim Nazir wrote:
> > From: Sushrut Shree Trivedi <quic_sushruts@quicinc.com>
> > 
> > Enable PCIe0 and PCIe1 along with the respective phy-nodes.
> > 
> > PCIe0 is routed to an m.2 E key connector on the mainboard for wifi
> > attaches while PCIe1 routes to a standard PCIe x4 expansion slot.
> > 
> > Signed-off-by: Sushrut Shree Trivedi <quic_sushruts@quicinc.com>
> > Signed-off-by: Wasim Nazir <wasim.nazir@oss.qualcomm.com>
> > ---
> >  arch/arm64/boot/dts/qcom/lemans-evk.dts | 82 +++++++++++++++++++++++++++++++++
> >  1 file changed, 82 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
> > index 196c5ee0dd34..7528fa1c661a 100644
> > --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
> > +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
> > @@ -379,6 +379,40 @@ &mdss0_dp1_phy {
> >  	status = "okay";
> >  };
> >  
> > +&pcie0 {
> > +	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
> > +	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
> > +
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pcie0_default_state>;
> 
> property-n
> property-names
> 
> in this order, please

Ack.

> 
> Konrad

-- 
Regards,
Wasim