From: Manikanta Maddireddy <mmaddireddy@nvidia.com>
To: <bhelgaas@google.com>, <lpieralisi@kernel.org>,
<kwilczynski@kernel.org>, <mani@kernel.org>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
<jingoohan1@gmail.com>, <vidyas@nvidia.com>, <cassel@kernel.org>,
<18255117159@163.com>
Cc: <linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
"Manikanta Maddireddy" <mmaddireddy@nvidia.com>
Subject: [PATCH V4 10/22] PCI: tegra194: Enable DMA interrupt
Date: Mon, 26 Jan 2026 13:15:07 +0530 [thread overview]
Message-ID: <20260126074519.3426742-11-mmaddireddy@nvidia.com> (raw)
In-Reply-To: <20260126074519.3426742-1-mmaddireddy@nvidia.com>
From: Vidya Sagar <vidyas@nvidia.com>
Enable DMA interrupt to support Tegra PCIe DMA in both Root port and
Endpoint modes.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
V4:
* None
V3:
* This is a new patch in this series
drivers/pci/controller/dwc/pcie-tegra194.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 58f33e7bd5a8..e5168754b92d 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -91,6 +91,7 @@
#define APPL_INTR_EN_L1_8_0 0x44
#define APPL_INTR_EN_L1_8_BW_MGT_INT_EN BIT(2)
#define APPL_INTR_EN_L1_8_AUTO_BW_INT_EN BIT(3)
+#define APPL_INTR_EN_L1_8_EDMA_INT_EN BIT(6)
#define APPL_INTR_EN_L1_8_INTX_EN BIT(11)
#define APPL_INTR_EN_L1_8_AER_INT_EN BIT(15)
@@ -555,6 +556,13 @@ static irqreturn_t tegra_pcie_ep_hard_irq(int irq, void *arg)
spurious = 0;
}
+ if (status_l0 & APPL_INTR_STATUS_L0_INT_INT) {
+ status_l1 = appl_readl(pcie, APPL_INTR_STATUS_L1_8_0);
+ /* Interrupt is handled by dma driver, don't treat it as spurious */
+ if (status_l1 & APPL_INTR_STATUS_L1_8_0_EDMA_INT_MASK)
+ spurious = 0;
+ }
+
if (spurious) {
dev_warn(pcie->dev, "Random interrupt (STATUS = 0x%08X)\n",
status_l0);
@@ -774,6 +782,7 @@ static void tegra_pcie_enable_intx_interrupts(struct dw_pcie_rp *pp)
val |= APPL_INTR_EN_L1_8_INTX_EN;
val |= APPL_INTR_EN_L1_8_AUTO_BW_INT_EN;
val |= APPL_INTR_EN_L1_8_BW_MGT_INT_EN;
+ val |= APPL_INTR_EN_L1_8_EDMA_INT_EN;
if (IS_ENABLED(CONFIG_PCIEAER))
val |= APPL_INTR_EN_L1_8_AER_INT_EN;
appl_writel(pcie, val, APPL_INTR_EN_L1_8_0);
@@ -1839,6 +1848,7 @@ static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie)
val |= APPL_INTR_EN_L0_0_SYS_INTR_EN;
val |= APPL_INTR_EN_L0_0_LINK_STATE_INT_EN;
val |= APPL_INTR_EN_L0_0_PCI_CMD_EN_INT_EN;
+ val |= APPL_INTR_EN_L0_0_INT_INT_EN;
appl_writel(pcie, val, APPL_INTR_EN_L0_0);
val = appl_readl(pcie, APPL_INTR_EN_L1_0_0);
@@ -1846,6 +1856,10 @@ static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie)
val |= APPL_INTR_EN_L1_0_0_RDLH_LINK_UP_INT_EN;
appl_writel(pcie, val, APPL_INTR_EN_L1_0_0);
+ val = appl_readl(pcie, APPL_INTR_EN_L1_8_0);
+ val |= APPL_INTR_EN_L1_8_EDMA_INT_EN;
+ appl_writel(pcie, val, APPL_INTR_EN_L1_8_0);
+
reset_control_deassert(pcie->core_rst);
val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
--
2.34.1
next prev parent reply other threads:[~2026-01-26 7:47 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-26 7:44 [PATCH V4 00/22] Enhancements to pcie-tegra194 driver Manikanta Maddireddy
2026-01-26 7:44 ` [PATCH V4 01/22] PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select" Manikanta Maddireddy
2026-01-26 7:44 ` [PATCH V4 02/22] PCI: tegra194: Drive CLKREQ signal low explicitly Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 03/22] PCI: tegra194: Fix polling delay for L2 state Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 04/22] PCI: tegra194: Apply pinctrl settings for both PCIe RP and EP Manikanta Maddireddy
2026-01-30 17:21 ` Jon Hunter
2026-02-02 5:22 ` Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 05/22] PCI: tegra194: Refactor LTSSM state polling on surprise down Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 06/22] PCI: tegra194: Disable direct speed change for EP Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 07/22] PCI: tegra194: Calibrate P2U for endpoint mode Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 08/22] PCI: tegra194: Free resources during controller deinitialization Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 09/22] PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration Manikanta Maddireddy
2026-01-26 7:45 ` Manikanta Maddireddy [this message]
2026-01-26 7:45 ` [PATCH V4 11/22] PCI: tegra194: Enable hardware hot reset mode in Endpoint Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 12/22] PCI: tegra194: Allow system suspend when the Endpoint link is not up Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 13/22] PCI: tegra194: Disable L1.2 capability of Tegra234 EP Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 14/22] PCI: tegra194: Set LTR message request before PCIe link up Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 15/22] PCI: tegra194: Don't force the device into the D0 state before L2 Manikanta Maddireddy
2026-02-02 13:27 ` Jon Hunter
2026-01-26 7:45 ` [PATCH V4 16/22] PCI: tegra194: Free up EP resources during remove() Manikanta Maddireddy
2026-02-02 13:28 ` Jon Hunter
2026-01-26 7:45 ` [PATCH V4 17/22] dt-bindings: PCI: tegra194: Add monitor clock support Manikanta Maddireddy
2026-01-29 16:40 ` Rob Herring
2026-02-02 4:34 ` Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 18/22] PCI: tegra194: Add core " Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 19/22] PCI: tegra194: Add ASPM L1 entrance latency config Manikanta Maddireddy
2026-02-02 13:28 ` Jon Hunter
2026-01-26 7:45 ` [PATCH V4 20/22] PCI: tegra194: Use HW version number Manikanta Maddireddy
2026-02-02 13:30 ` Jon Hunter
2026-01-26 7:45 ` [PATCH V4 21/22] PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 22/22] PCI: tegra194: Disable PERST IRQ only in Endpoint mode Manikanta Maddireddy
2026-02-02 13:35 ` [PATCH V4 00/22] Enhancements to pcie-tegra194 driver Jon Hunter
2026-02-05 7:55 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260126074519.3426742-11-mmaddireddy@nvidia.com \
--to=mmaddireddy@nvidia.com \
--cc=18255117159@163.com \
--cc=bhelgaas@google.com \
--cc=cassel@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jingoohan1@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=robh@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=vidyas@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®