From: Manikanta Maddireddy <mmaddireddy@nvidia.com>
To: <bhelgaas@google.com>, <lpieralisi@kernel.org>,
<kwilczynski@kernel.org>, <mani@kernel.org>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
<jingoohan1@gmail.com>, <vidyas@nvidia.com>, <cassel@kernel.org>,
<18255117159@163.com>
Cc: <linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
"Manikanta Maddireddy" <mmaddireddy@nvidia.com>
Subject: [PATCH V4 21/22] PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
Date: Mon, 26 Jan 2026 13:15:18 +0530 [thread overview]
Message-ID: <20260126074519.3426742-22-mmaddireddy@nvidia.com> (raw)
In-Reply-To: <20260126074519.3426742-1-mmaddireddy@nvidia.com>
When PERST# is deasserted twice (assert -> deassert -> assert -> deassert),
a CBB (Control Backbone) timeout occurs at DBI register offset 0x8bc
(PCIE_MISC_CONTROL_1_OFF). This happens because pci_epc_deinit_notify()
and dw_pcie_ep_cleanup() are called before reset_control_deassert() powers
on the controller core.
The call chain that causes the timeout:
pex_ep_event_pex_rst_deassert()
pci_epc_deinit_notify()
pci_epf_test_epc_deinit()
pci_epf_test_clear_bar()
pci_epc_clear_bar()
dw_pcie_ep_clear_bar()
__dw_pcie_ep_reset_bar()
dw_pcie_dbi_ro_wr_en() <- Accesses 0x8bc DBI register
reset_control_deassert(pcie->core_rst) <- Core powered on HERE
The DBI registers, including PCIE_MISC_CONTROL_1_OFF (0x8bc), are only
accessible after the controller core is powered on via
reset_control_deassert(pcie->core_rst). Accessing them before this point
results in a CBB timeout because the hardware is not yet operational.
Fix this by moving pci_epc_deinit_notify() and dw_pcie_ep_cleanup() to
after reset_control_deassert(pcie->core_rst), ensuring the controller is
fully powered on before any DBI register accesses occur.
Fixes: 40e2125381dc ("PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert()")
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
V4:
* This is a new patch in this series
drivers/pci/controller/dwc/pcie-tegra194.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 156918ba5ab4..b0964f57e8f2 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1777,10 +1777,6 @@ static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie)
goto fail_phy;
}
- /* Perform cleanup that requires refclk */
- pci_epc_deinit_notify(pcie->pci.ep.epc);
- dw_pcie_ep_cleanup(&pcie->pci.ep);
-
/* Clear any stale interrupt statuses */
appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L0);
appl_writel(pcie, 0xFFFFFFFF, APPL_INTR_STATUS_L1_0_0);
@@ -1853,6 +1849,10 @@ static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie)
reset_control_deassert(pcie->core_rst);
+ /* Perform cleanup that requires refclk and core reset deasserted */
+ pci_epc_deinit_notify(pcie->pci.ep.epc);
+ dw_pcie_ep_cleanup(&pcie->pci.ep);
+
val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
val &= ~PORT_LOGIC_SPEED_CHANGE;
dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
--
2.34.1
next prev parent reply other threads:[~2026-01-26 7:48 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-26 7:44 [PATCH V4 00/22] Enhancements to pcie-tegra194 driver Manikanta Maddireddy
2026-01-26 7:44 ` [PATCH V4 01/22] PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select" Manikanta Maddireddy
2026-01-26 7:44 ` [PATCH V4 02/22] PCI: tegra194: Drive CLKREQ signal low explicitly Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 03/22] PCI: tegra194: Fix polling delay for L2 state Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 04/22] PCI: tegra194: Apply pinctrl settings for both PCIe RP and EP Manikanta Maddireddy
2026-01-30 17:21 ` Jon Hunter
2026-02-02 5:22 ` Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 05/22] PCI: tegra194: Refactor LTSSM state polling on surprise down Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 06/22] PCI: tegra194: Disable direct speed change for EP Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 07/22] PCI: tegra194: Calibrate P2U for endpoint mode Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 08/22] PCI: tegra194: Free resources during controller deinitialization Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 09/22] PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 10/22] PCI: tegra194: Enable DMA interrupt Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 11/22] PCI: tegra194: Enable hardware hot reset mode in Endpoint Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 12/22] PCI: tegra194: Allow system suspend when the Endpoint link is not up Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 13/22] PCI: tegra194: Disable L1.2 capability of Tegra234 EP Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 14/22] PCI: tegra194: Set LTR message request before PCIe link up Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 15/22] PCI: tegra194: Don't force the device into the D0 state before L2 Manikanta Maddireddy
2026-02-02 13:27 ` Jon Hunter
2026-01-26 7:45 ` [PATCH V4 16/22] PCI: tegra194: Free up EP resources during remove() Manikanta Maddireddy
2026-02-02 13:28 ` Jon Hunter
2026-01-26 7:45 ` [PATCH V4 17/22] dt-bindings: PCI: tegra194: Add monitor clock support Manikanta Maddireddy
2026-01-29 16:40 ` Rob Herring
2026-02-02 4:34 ` Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 18/22] PCI: tegra194: Add core " Manikanta Maddireddy
2026-01-26 7:45 ` [PATCH V4 19/22] PCI: tegra194: Add ASPM L1 entrance latency config Manikanta Maddireddy
2026-02-02 13:28 ` Jon Hunter
2026-01-26 7:45 ` [PATCH V4 20/22] PCI: tegra194: Use HW version number Manikanta Maddireddy
2026-02-02 13:30 ` Jon Hunter
2026-01-26 7:45 ` Manikanta Maddireddy [this message]
2026-01-26 7:45 ` [PATCH V4 22/22] PCI: tegra194: Disable PERST IRQ only in Endpoint mode Manikanta Maddireddy
2026-02-02 13:35 ` [PATCH V4 00/22] Enhancements to pcie-tegra194 driver Jon Hunter
2026-02-05 7:55 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260126074519.3426742-22-mmaddireddy@nvidia.com \
--to=mmaddireddy@nvidia.com \
--cc=18255117159@163.com \
--cc=bhelgaas@google.com \
--cc=cassel@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jingoohan1@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=robh@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=vidyas@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®