[PATCH 0/3] Add Cypress CYPD6129 UCSI support for monza SOM USB0 DRD

[Akash Kumar <akash.kumar@oss.qualcomm.com>]

Hi all,

This series adds support for the Cypress/Infineon CYPD6129 UCSI controller,
used on the monza SOM platform for USB0 dual-role operation.

The series consists of:
  1. A dt-binding update to document the CYPD6129 compatible string for the
     existing CCGx binding.
  2. A driver update to bind the UCSI CCG driver to CYPD6129.
  3. A board DTS update to enable USB0 DRD mode on monza SOM using the
     CYPD6129 controller over I2C12.

This enables the USB-C controller, connector, interrupt routing, and the
USB2/USB3 endpoints required for DRD operation on the platform.

Akash Kumar (3):
  dt-bindings: usb: typec: Add Cypress CYPD6129 UCSI controller compatible
  usb: ucsi: ccg: Add support for CYPD6129 (CCG6)
  arm64: dts: qcom: monaco-monza-som: Enable USB0 DRD mode

 .../bindings/usb/cypress,cypd4226.yaml        | 73 ++++++++++++++-----
 .../arm64/boot/dts/qcom/monaco-monza-som.dtsi | 57 +++++++++++++++
 drivers/usb/typec/ucsi/ucsi_ccg.c             |  1 +
 3 files changed, 113 insertions(+), 18 deletions(-)

-- 
2.43.0

Thanks,
Akash Kumar