From: "lianfeng.ouyang" <lianfeng.ouyang@starfivetech.com>
To: Andi Shyti <andi.shyti@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Lianfeng Ouyang <lianfeng.ouyang@starfivetech.com>
Subject: [PATCH v2 1/3] dt-bindings: i2c: Add StarFive JHB100 I2C
Date: Wed, 27 May 2026 16:50:37 +0800 [thread overview]
Message-ID: <20260527085039.44435-2-lianfeng.ouyang@starfivetech.com> (raw)
In-Reply-To: <20260527085039.44435-1-lianfeng.ouyang@starfivetech.com>
From: Lianfeng Ouyang <lianfeng.ouyang@starfivetech.com>
Add device tree bindings for the Starfive I2C controller
and its implementation
The binding defines two platform-specific compatibles for the StarFive
JHB100 implementation:
- "starfive,jhb100-i2c-master"
- "starfive,jhb100-i2c-slave"
The controller supports standard I2C and SMBus protocols, programmable
FIFO depths, and optional SMBus Alert routing. The binding documents
the necessary clocks, resets, and timing properties.
Signed-off-by: Lianfeng Ouyang <lianfeng.ouyang@starfivetech.com>
---
.../bindings/i2c/starfive,jhb100-i2c.yaml | 128 ++++++++++++++++++
1 file changed, 128 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/starfive,jhb100-i2c.yaml
diff --git a/Documentation/devicetree/bindings/i2c/starfive,jhb100-i2c.yaml b/Documentation/devicetree/bindings/i2c/starfive,jhb100-i2c.yaml
new file mode 100644
index 000000000000..c8631348121c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/starfive,jhb100-i2c.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 StarFive Technology Co., Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/starfive,jhb100-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive jhb100 I2C Controller
+
+maintainers:
+ - Lianfeng Ouyang <lianfeng.ouyang@starfivetech.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ description: |
+ Must be one of:
+ - "starfive,jhb100-i2c-master" for master mode controller
+ - "starfive,jhb100-i2c-slave" for slave mode controller
+ enum:
+ - starfive,jhb100-i2c-master
+ - starfive,jhb100-i2c-slave
+
+ reg:
+ maxItems: 1
+ description: StarFive I2C controller memory mapped registers
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 2
+ items:
+ - description: I2C controller reference clock source
+ - description: APB interface clock source
+
+ clock-names:
+ minItems: 2
+ maxItems: 2
+ items:
+ - const: ref
+ - const: pclk
+
+ resets:
+ maxItems: 1
+ description: Phandle to the reset controller for the I2C controller
+
+ clock-frequency:
+ description: Desired I2C bus clock frequency in Hz
+ enum: [100000, 400000, 1000000, 3400000]
+ default: 400000
+
+ i2c-sda-hold-time-ns:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ SDA hold time in nanoseconds, used to compute the value written into
+ the DW_IC_SDA_HOLD register.
+ default: 0
+
+ i2c-scl-falling-time-ns:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ SCL falling time in nanoseconds, used to compute the tLOW period.
+ default: 300
+
+ i2c-sda-falling-time-ns:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ SDA falling time in nanoseconds, used to compute the tHIGH period.
+ default: 300
+
+ starfive,mctp-i2c-ms:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ Phandle to the master I2C node associated with this slave controller.
+ Only used in slave mode, typically for MCTP applications.
+
+ starfive,i2c-tx-fifo-depth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ TX FIFO depth of the I2C controller.
+ default: 8
+
+ starfive,i2c-rx-fifo-depth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ RX FIFO depth of the I2C controller.
+ default: 8
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+examples:
+ - |
+ i2c@2000 {
+ compatible = "starfive,jhb100-i2c-master";
+ reg = <0x2000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ clocks = <&i2c_refclk>, <&apb_pclk>;
+ clock-names = "ref", "pclk";
+ interrupts = <0>;
+
+ eeprom@64 {
+ compatible = "atmel,24c02";
+ reg = <0x64>;
+ };
+ };
+ |
+ i2c@3000 {
+ compatible = "starfive,jhb100-i2c-slave";
+ reg = <0x3000 0x100>;
+ clocks = <&i2c_refclk>, <&apb_pclk>;
+ clock-names = "ref", "pclk";
+ interrupts = <1>;
+ starfive,mctp-i2c-ms = <&i2c_master>;
+ };
+...
--
2.43.0
next prev parent reply other threads:[~2026-05-27 9:06 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-27 8:50 [PATCH v2 0/3] i2c: Add Starfive JHB100 I2C master/slave support lianfeng.ouyang
2026-05-27 8:50 ` lianfeng.ouyang [this message]
2026-05-27 13:04 ` [PATCH v2 1/3] dt-bindings: i2c: Add StarFive JHB100 I2C Krzysztof Kozlowski
2026-05-28 6:57 ` 回复: " Lianfeng Ouyang
2026-05-28 7:47 ` Krzysztof Kozlowski
2026-05-28 8:30 ` 回复: " Lianfeng Ouyang
2026-05-27 8:50 ` [PATCH v2 2/3] i2c: designware: Export symbols and add __weak for Starfive I2C driver lianfeng.ouyang
2026-05-27 13:07 ` Krzysztof Kozlowski
2026-05-28 2:36 ` 回复: " Lianfeng Ouyang
2026-05-28 7:46 ` Krzysztof Kozlowski
2026-05-28 8:28 ` 回复: " Lianfeng Ouyang
2026-06-03 14:34 ` Krzysztof Kozlowski
2026-06-04 2:11 ` 回复: " Lianfeng Ouyang
2026-06-02 22:24 ` Andy Shevchenko
2026-05-27 8:50 ` [PATCH v2 3/3] i2c: starfive: Add StarFive JHB100 I2C master/slave support lianfeng.ouyang
2026-05-27 12:36 ` [PATCH v2 0/3] i2c: Add Starfive " Mika Westerberg
2026-05-28 2:41 ` 回复: " Lianfeng Ouyang
2026-06-02 22:26 ` Andy Shevchenko
2026-06-03 5:31 ` 回复: " Lianfeng Ouyang
2026-06-03 5:48 ` Andy Shevchenko
2026-06-03 6:09 ` 回复: " Lianfeng Ouyang
2026-06-03 6:39 ` Andy Shevchenko
2026-06-04 3:00 ` 回复: " Lianfeng Ouyang
2026-06-04 18:09 ` Andy Shevchenko
2026-06-08 9:48 ` 回复: " Lianfeng Ouyang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260527085039.44435-2-lianfeng.ouyang@starfivetech.com \
--to=lianfeng.ouyang@starfivetech.com \
--cc=andi.shyti@kernel.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®