* [PATCH 1/5] arm64: dts: imx8mp-icore-mx8mp: enable the watchdog
2026-10-30 16:35 [PATCH 0/5] arm64: support Engicam i.Core MX8M Plus FE C.TOUCH 2.0 board Dario Binacchi
@ 2026-10-30 16:35 ` Dario Binacchi
2026-10-30 16:35 ` [PATCH 2/5] dt-bindings: arm: fsl: support Engicam i.Core MX8M Plus FE C.TOUCH 2.0 board Dario Binacchi
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Dario Binacchi @ 2026-10-30 16:35 UTC (permalink / raw)
To: linux-kernel
Cc: michael, linux-amarula, Dario Binacchi, Conor Dooley,
Fabio Estevam, Frank Li, Krzysztof Kozlowski,
Pengutronix Kernel Team, Rob Herring, Sascha Hauer, devicetree,
imx, linux-arm-kernel
Enable the watchdog, asserting WDOG_B on timeout. On the SoM the signal
is connected to the PMIC, which resets the whole board.
Tested on the i.Core MX8M Plus Fast Ethernet variant.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
.../boot/dts/freescale/imx8mp-icore-mx8mp.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi
index affcc20b20c7..33066247cd2c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi
@@ -122,6 +122,13 @@ &usdhc3 {
status = "okay";
};
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
&iomuxc {
pinctrl_i2c1: i2c1grp {
fsl,pins = <
@@ -183,4 +190,10 @@ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
>;
};
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6
+ >;
+ };
};
--
2.43.0
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH 2/5] dt-bindings: arm: fsl: support Engicam i.Core MX8M Plus FE C.TOUCH 2.0 board
2026-10-30 16:35 [PATCH 0/5] arm64: support Engicam i.Core MX8M Plus FE C.TOUCH 2.0 board Dario Binacchi
2026-10-30 16:35 ` [PATCH 1/5] arm64: dts: imx8mp-icore-mx8mp: enable the watchdog Dario Binacchi
@ 2026-10-30 16:35 ` Dario Binacchi
2026-10-30 16:35 ` [PATCH 3/5] arm64: dts: freescale: support Engicam i.Core MX8M Plus FE SoM Dario Binacchi
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Dario Binacchi @ 2026-10-30 16:35 UTC (permalink / raw)
To: linux-kernel
Cc: michael, linux-amarula, Dario Binacchi, Conor Dooley,
Daniel Baluta, Ernest Van Hoecke, Francesco Dolcini, Frank Li,
Hugo Villeneuve, Joseph Guo, Josua Mayer, Krzysztof Kozlowski,
Markus Niebel, Maud Spierings, Mehmet Fide, Rob Herring,
Shawn Guo, Stefano Radaelli, devicetree
Add devicetree bindings for Engicam i.Core MX8M Plus Fast Ethernet
C.TOUCH 2.0 board based on the Engicam i.Core MX8M Plus Fast Ethernet
SoM (System-on-Module).
Unlike the i.Core MX8M Plus SoM, the Fast Ethernet variant embeds an
RMII 10/100 Ethernet PHY, so a dedicated SoM compatible is added.
The use of an enum for a single element is justified by the future
addition of other boards based on the same SoM.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index c8290a83205b..5835c25bca90 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1222,6 +1222,13 @@ properties:
- const: engicam,icore-mx8mp # i.MX8MP Engicam i.Core MX8M Plus SoM
- const: fsl,imx8mp
+ - description: Engicam i.Core MX8M Plus Fast Ethernet SoM based boards
+ items:
+ - enum:
+ - engicam,icore-mx8mp-fe-ctouch2 # i.MX8MP Engicam i.Core MX8M Plus FE C.TOUCH 2.0 Board
+ - const: engicam,icore-mx8mp-fe # i.MX8MP Engicam i.Core MX8M Plus FE SoM
+ - const: fsl,imx8mp
+
- description: Ka-Ro TX8P-ML81 SoM based boards
items:
- enum:
--
2.43.0
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH 3/5] arm64: dts: freescale: support Engicam i.Core MX8M Plus FE SoM
2026-10-30 16:35 [PATCH 0/5] arm64: support Engicam i.Core MX8M Plus FE C.TOUCH 2.0 board Dario Binacchi
2026-10-30 16:35 ` [PATCH 1/5] arm64: dts: imx8mp-icore-mx8mp: enable the watchdog Dario Binacchi
2026-10-30 16:35 ` [PATCH 2/5] dt-bindings: arm: fsl: support Engicam i.Core MX8M Plus FE C.TOUCH 2.0 board Dario Binacchi
@ 2026-10-30 16:35 ` Dario Binacchi
2026-10-30 16:35 ` [PATCH 4/5] arm64: dts: freescale: support Engicam i.Core MX8M Plus FE C.TOUCH 2.0 board Dario Binacchi
2026-10-30 16:35 ` [PATCH 5/5] arm64: dts: freescale: add Engicam C.TOUCH 2.0 LVDS display overlay Dario Binacchi
4 siblings, 0 replies; 6+ messages in thread
From: Dario Binacchi @ 2026-10-30 16:35 UTC (permalink / raw)
To: linux-kernel
Cc: michael, linux-amarula, Dario Binacchi, Conor Dooley,
Fabio Estevam, Frank Li, Krzysztof Kozlowski,
Pengutronix Kernel Team, Rob Herring, Sascha Hauer, devicetree,
imx, linux-arm-kernel
Support Engicam i.Core MX8M Plus Fast Ethernet SoM, a variant of the
i.Core MX8M Plus SoM which embeds a SMSC LAN8710 10/100 Ethernet PHY
connected to the EQOS controller in RMII mode.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
.../dts/freescale/imx8mp-icore-mx8mp-fe.dtsi | 62 +++++++++++++++++++
1 file changed, 62 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-fe.dtsi
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-fe.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-fe.dtsi
new file mode 100644
index 000000000000..1341de0ba4b5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-fe.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2026 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2026 Engicam srl
+ */
+
+#include "imx8mp-icore-mx8mp.dtsi"
+
+/ {
+ compatible = "engicam,icore-mx8mp-fe", "fsl,imx8mp";
+};
+
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>;
+ phy-handle = <ðphy0>;
+ phy-mode = "rmii";
+ snps,force_thresh_dma_mode;
+ snps,rmii_refclk_ext;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 { /* SMSC LAN8710 */
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ethphy0>;
+ reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <500>;
+ reset-deassert-us = <500>;
+ smsc,disable-energy-detect;
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x12
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x12
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x12
+ /* RMII reference clock input, provided by the SoM */
+ MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK 0x12
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x1d0
+ MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER 0x91
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x1d0
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x1d0
+ >;
+ };
+
+ pinctrl_ethphy0: ethphy0grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_RD3__GPIO1_IO29 0x16
+ >;
+ };
+};
--
2.43.0
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH 4/5] arm64: dts: freescale: support Engicam i.Core MX8M Plus FE C.TOUCH 2.0 board
2026-10-30 16:35 [PATCH 0/5] arm64: support Engicam i.Core MX8M Plus FE C.TOUCH 2.0 board Dario Binacchi
` (2 preceding siblings ...)
2026-10-30 16:35 ` [PATCH 3/5] arm64: dts: freescale: support Engicam i.Core MX8M Plus FE SoM Dario Binacchi
@ 2026-10-30 16:35 ` Dario Binacchi
2026-10-30 16:35 ` [PATCH 5/5] arm64: dts: freescale: add Engicam C.TOUCH 2.0 LVDS display overlay Dario Binacchi
4 siblings, 0 replies; 6+ messages in thread
From: Dario Binacchi @ 2026-10-30 16:35 UTC (permalink / raw)
To: linux-kernel
Cc: michael, linux-amarula, Dario Binacchi, Conor Dooley,
Fabio Estevam, Frank Li, Krzysztof Kozlowski,
Pengutronix Kernel Team, Rob Herring, Sascha Hauer, devicetree,
imx, linux-arm-kernel
Support Engicam i.Core MX8M Plus Fast Ethernet C.TOUCH 2.0 board with:
- 10/100 Ethernet
- CAN
- RTC
- USB host, through an on-board hub
- USB OTG, device only
- Micro SD card connector
- LVDS display connector
The C.TOUCH 2.0 carrier board is described in a separate dtsi, so that
it can be shared with the other i.Core MX8M Plus SoMs.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../freescale/imx8mp-icore-mx8mp-ctouch2.dtsi | 166 ++++++++++++++++++
.../imx8mp-icore-mx8mp-fe-ctouch2.dts | 17 ++
3 files changed, 184 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-ctouch2.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-fe-ctouch2.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index a80cccf34eb5..bf324cdec879 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -655,6 +655,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-pulse.dtb
DTC_FLAGS_imx8mp-hummingboard-ripple := -@
dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-ripple.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-fe-ctouch2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-iota2-lumpy.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-bl-osm-s.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-ctouch2.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-ctouch2.dtsi
new file mode 100644
index 000000000000..5338aeb6ec92
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-ctouch2.dtsi
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2026 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2026 Engicam srl
+ *
+ * Engicam C.TOUCH 2.0 carrier board for i.Core MX8M Plus SoMs.
+ */
+
+/ {
+ aliases {
+ rtc0 = &pcf8563;
+ rtc1 = &snvs_rtc;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 100000 0>;
+ brightness-levels = <0 100>;
+ num-interpolated-steps = <100>;
+ default-brightness-level = <80>;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+/* console */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+/* USB OTG, device only */
+&usb3_phy0 {
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+/* USB host, through the on-board hub */
+&usb3_phy1 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+/* micro SD */
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154
+ MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT 0x116
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x40
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x40
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-fe-ctouch2.dts b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-fe-ctouch2.dts
new file mode 100644
index 000000000000..c4271cffca9a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-fe-ctouch2.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2026 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2026 Engicam srl
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include "imx8mp-icore-mx8mp-fe.dtsi"
+#include "imx8mp-icore-mx8mp-ctouch2.dtsi"
+
+/ {
+ model = "Engicam i.Core MX8M Plus Fast Ethernet C.TOUCH 2.0";
+ compatible = "engicam,icore-mx8mp-fe-ctouch2", "engicam,icore-mx8mp-fe",
+ "fsl,imx8mp";
+};
--
2.43.0
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH 5/5] arm64: dts: freescale: add Engicam C.TOUCH 2.0 LVDS display overlay
2026-10-30 16:35 [PATCH 0/5] arm64: support Engicam i.Core MX8M Plus FE C.TOUCH 2.0 board Dario Binacchi
` (3 preceding siblings ...)
2026-10-30 16:35 ` [PATCH 4/5] arm64: dts: freescale: support Engicam i.Core MX8M Plus FE C.TOUCH 2.0 board Dario Binacchi
@ 2026-10-30 16:35 ` Dario Binacchi
4 siblings, 0 replies; 6+ messages in thread
From: Dario Binacchi @ 2026-10-30 16:35 UTC (permalink / raw)
To: linux-kernel
Cc: michael, linux-amarula, Dario Binacchi, Conor Dooley,
Fabio Estevam, Frank Li, Krzysztof Kozlowski,
Pengutronix Kernel Team, Rob Herring, Sascha Hauer, devicetree,
imx, linux-arm-kernel
Add an overlay for the C.TOUCH 2.0 carrier board fitted with the
AM-1280800W8TZQW-T00H 10.1" 1280x800 LVDS panel (C.TOUCH 2.0 10.1"
Open Frame). Its touchscreen is connected over USB, so there is no
touchscreen node.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
arch/arm64/boot/dts/freescale/Makefile | 7 +++
...ctouch2-overlay-am-1280800w8tzqw-t00h.dtso | 53 +++++++++++++++++++
2 files changed, 60 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-ctouch2-overlay-am-1280800w8tzqw-t00h.dtso
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index bf324cdec879..a3dce3310fac 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -656,6 +656,13 @@ DTC_FLAGS_imx8mp-hummingboard-ripple := -@
dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-ripple.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-fe-ctouch2.dtb
+
+imx8mp-icore-mx8mp-fe-ctouch2-overlay-am-1280800w8tzqw-t00h-dtbs := \
+ imx8mp-icore-mx8mp-fe-ctouch2.dtb \
+ imx8mp-icore-mx8mp-ctouch2-overlay-am-1280800w8tzqw-t00h.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-ctouch2-overlay-am-1280800w8tzqw-t00h.dtbo \
+ imx8mp-icore-mx8mp-fe-ctouch2-overlay-am-1280800w8tzqw-t00h.dtb
+
dtb-$(CONFIG_ARCH_MXC) += imx8mp-iota2-lumpy.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-bl-osm-s.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-ctouch2-overlay-am-1280800w8tzqw-t00h.dtso b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-ctouch2-overlay-am-1280800w8tzqw-t00h.dtso
new file mode 100644
index 000000000000..d5a5eb96101d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-ctouch2-overlay-am-1280800w8tzqw-t00h.dtso
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2026 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2026 Engicam srl
+ *
+ * Ampire AM-1280800W8TZQW-T00H 10.1" 1280x800 LVDS panel. Its touchscreen
+ * controller is connected over USB.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+
+&{/} {
+ panel-lvds {
+ compatible = "ampire,am-1280800w8tzqw-t00h";
+ backlight = <&backlight>;
+ power-supply = <®_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&ldb_lvds_ch0>;
+ };
+ };
+ };
+};
+
+&lcdif2 {
+ status = "okay";
+};
+
+&lvds_bridge {
+ assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+ <&clk IMX8MP_VIDEO_PLL1>;
+ assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+ /* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */
+ assigned-clock-rates = <0>, <1013600000>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ ldb_lvds_ch0: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
--
2.43.0
^ permalink raw reply [flat|nested] 6+ messages in thread