* [PATCH RFC v2 0/2] arm64: dts: qcom: nord: Add ADC-TM thermistor channels
@ 2026-11-03 13:54 Shawn Guo
2026-11-03 13:54 ` [PATCH RFC v2 1/2] arm64: dts: qcom: nord-ride-embedded: Add PMIC ADC " Shawn Guo
2026-11-03 13:54 ` [PATCH RFC v2 2/2] arm64: dts: qcom: nord-rrd: " Shawn Guo
0 siblings, 2 replies; 3+ messages in thread
From: Shawn Guo @ 2026-11-03 13:54 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Konrad Dybcio, Abel Vesa, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Bartosz Golaszewski, Dhruvin Rajpura, devicetree,
linux-arm-msm, linux-kernel, Shawn Guo
Add the three board thermistors wired to PMAU0102 (Kai_MV) AMUX pins on
Nord Ride and RRD: SDRAM3 (Kai E AMUX1), SDRAM1 (Kai I AMUX1)
and UFS (Kai I AMUX2).
Dependencies:
- [PATCH v5 0/7] arm64: dts: qcom: nord: Add remoteproc and PMIC support
https://lore.kernel.org/all/20261014063953.549379-1-shengchao.guo@oss.qualcomm.com/
Changes for v2:
- Move thermistor channels and thermal zones from pmau0102-nord.dtsi
to board DTS
- Keep #thermal-sensor-cells in pmau0102-nord.dtsi and set it for
all Kai ADC instances
- Rename thermal zones to sdram3/sdram1/ufs-thermal
- Link to v1: https://lore.kernel.org/all/20261028150103.520428-1-shengchao.guo@oss.qualcomm.com
Dhruvin Rajpura (1):
arm64: dts: qcom: nord-ride-embedded: Add PMIC ADC thermistor channels
Shawn Guo (1):
arm64: dts: qcom: nord-rrd: Add PMIC ADC thermistor channels
.../boot/dts/qcom/nord-ride-embedded.dts | 84 +++++++++++++++++++
arch/arm64/boot/dts/qcom/nord-rrd.dts | 84 +++++++++++++++++++
arch/arm64/boot/dts/qcom/pmau0102-nord.dtsi | 8 ++
3 files changed, 176 insertions(+)
--
2.43.0
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH RFC v2 1/2] arm64: dts: qcom: nord-ride-embedded: Add PMIC ADC thermistor channels
2026-11-03 13:54 [PATCH RFC v2 0/2] arm64: dts: qcom: nord: Add ADC-TM thermistor channels Shawn Guo
@ 2026-11-03 13:54 ` Shawn Guo
2026-11-03 13:54 ` [PATCH RFC v2 2/2] arm64: dts: qcom: nord-rrd: " Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2026-11-03 13:54 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Konrad Dybcio, Abel Vesa, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Bartosz Golaszewski, Dhruvin Rajpura, devicetree,
linux-arm-msm, linux-kernel, Shawn Guo
From: Dhruvin Rajpura <dhruvin.rajpura@oss.qualcomm.com>
The PMAU0102 (Kai_MV) ADC5 Gen3 controllers only expose the
REF_GND/1P25VREF/DIE_TEMP calibration channels, so no board thermistor
feeds the thermal framework.
On Nord Ride, three Kai AMUX pins are wired to thermistors: Kai
instance E's AMUX1 (SDRAM3 THERM) and Kai instance I's AMUX1/AMUX2
(SDRAM1 THERM, UFS THERM). The remaining Kai AMUX pins monitor voltage
rails.
Mark all Kai ADCs as thermal sensor providers in the PMIC dtsi, as it
is a PMIC capability, and describe the thermistor channels with
qcom,adc-tm and their thermal zones in the board DT, since the wiring
is board specific.
Signed-off-by: Dhruvin Rajpura <dhruvin.rajpura@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
---
.../boot/dts/qcom/nord-ride-embedded.dts | 84 +++++++++++++++++++
arch/arm64/boot/dts/qcom/pmau0102-nord.dtsi | 8 ++
2 files changed, 92 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/nord-ride-embedded.dts b/arch/arm64/boot/dts/qcom/nord-ride-embedded.dts
index 49635695f832..550cd7fe0ac1 100644
--- a/arch/arm64/boot/dts/qcom/nord-ride-embedded.dts
+++ b/arch/arm64/boot/dts/qcom/nord-ride-embedded.dts
@@ -53,6 +53,62 @@ bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
clock-div = <2>;
};
};
+
+ thermal-zones {
+ sdram3_thermal: sdram3-thermal {
+ thermal-sensors = <&pmau0102_e_adc ADC5_GEN3_AMUX1_THM_100K_PU(4)>;
+
+ trips {
+ trip0 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ trip1 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ sdram1_thermal: sdram1-thermal {
+ thermal-sensors = <&pmau0102_i_adc ADC5_GEN3_AMUX1_THM_100K_PU(8)>;
+
+ trips {
+ trip0 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ trip1 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ ufs_thermal: ufs-thermal {
+ thermal-sensors = <&pmau0102_i_adc ADC5_GEN3_AMUX2_THM_100K_PU(8)>;
+
+ trips {
+ trip0 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ trip1 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+ };
};
&apps_rsc {
@@ -366,6 +422,34 @@ vreg_l3l_1p8: ldo3 {
};
};
+&pmau0102_e_adc {
+ channel@444 {
+ reg = <ADC5_GEN3_AMUX1_THM_100K_PU(4)>;
+ label = "pmau0102_e_sdram3_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,adc-tm;
+ };
+};
+
+&pmau0102_i_adc {
+ channel@844 {
+ reg = <ADC5_GEN3_AMUX1_THM_100K_PU(8)>;
+ label = "pmau0102_i_sdram1_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,adc-tm;
+ };
+
+ channel@845 {
+ reg = <ADC5_GEN3_AMUX2_THM_100K_PU(8)>;
+ label = "pmau0102_i_ufs_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,adc-tm;
+ };
+};
+
&qupv3_0 {
firmware-name = "qcom/nord/qupv3fw.elf";
diff --git a/arch/arm64/boot/dts/qcom/pmau0102-nord.dtsi b/arch/arm64/boot/dts/qcom/pmau0102-nord.dtsi
index 47ea145f4abb..26c4d126a23b 100644
--- a/arch/arm64/boot/dts/qcom/pmau0102-nord.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmau0102-nord.dtsi
@@ -31,6 +31,7 @@ pmau0102_e_adc: adc@7200 {
#size-cells = <0>;
interrupts-extended = <&spmi_bus 0x4 0x72 0x1 IRQ_TYPE_EDGE_RISING>;
#io-channel-cells = <1>;
+ #thermal-sensor-cells = <1>;
channel@400 {
reg = <ADC5_GEN3_REF_GND(4)>;
@@ -84,6 +85,7 @@ pmau0102_f_adc: adc@7200 {
#size-cells = <0>;
interrupts-extended = <&spmi_bus 0x5 0x72 0x1 IRQ_TYPE_EDGE_RISING>;
#io-channel-cells = <1>;
+ #thermal-sensor-cells = <1>;
channel@500 {
reg = <ADC5_GEN3_REF_GND(5)>;
@@ -137,6 +139,7 @@ pmau0102_g_adc: adc@7200 {
#size-cells = <0>;
interrupts-extended = <&spmi_bus 0x6 0x72 0x1 IRQ_TYPE_EDGE_RISING>;
#io-channel-cells = <1>;
+ #thermal-sensor-cells = <1>;
channel@600 {
reg = <ADC5_GEN3_REF_GND(6)>;
@@ -190,6 +193,7 @@ pmau0102_h_adc: adc@7200 {
#size-cells = <0>;
interrupts-extended = <&spmi_bus 0x7 0x72 0x1 IRQ_TYPE_EDGE_RISING>;
#io-channel-cells = <1>;
+ #thermal-sensor-cells = <1>;
channel@700 {
reg = <ADC5_GEN3_REF_GND(7)>;
@@ -243,6 +247,7 @@ pmau0102_i_adc: adc@7200 {
#size-cells = <0>;
interrupts-extended = <&spmi_bus 0x8 0x72 0x1 IRQ_TYPE_EDGE_RISING>;
#io-channel-cells = <1>;
+ #thermal-sensor-cells = <1>;
channel@800 {
reg = <ADC5_GEN3_REF_GND(8)>;
@@ -296,6 +301,7 @@ pmau0102_j_adc: adc@7200 {
#size-cells = <0>;
interrupts-extended = <&spmi_bus 0x9 0x72 0x1 IRQ_TYPE_EDGE_RISING>;
#io-channel-cells = <1>;
+ #thermal-sensor-cells = <1>;
channel@900 {
reg = <ADC5_GEN3_REF_GND(9)>;
@@ -349,6 +355,7 @@ pmau0102_k_adc: adc@7200 {
#size-cells = <0>;
interrupts-extended = <&spmi_bus 0xa 0x72 0x1 IRQ_TYPE_EDGE_RISING>;
#io-channel-cells = <1>;
+ #thermal-sensor-cells = <1>;
channel@a00 {
reg = <ADC5_GEN3_REF_GND(0xa)>;
@@ -402,6 +409,7 @@ pmau0102_l_adc: adc@7200 {
#size-cells = <0>;
interrupts-extended = <&spmi_bus 0xb 0x72 0x1 IRQ_TYPE_EDGE_RISING>;
#io-channel-cells = <1>;
+ #thermal-sensor-cells = <1>;
channel@b00 {
reg = <ADC5_GEN3_REF_GND(0xb)>;
--
2.43.0
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH RFC v2 2/2] arm64: dts: qcom: nord-rrd: Add PMIC ADC thermistor channels
2026-11-03 13:54 [PATCH RFC v2 0/2] arm64: dts: qcom: nord: Add ADC-TM thermistor channels Shawn Guo
2026-11-03 13:54 ` [PATCH RFC v2 1/2] arm64: dts: qcom: nord-ride-embedded: Add PMIC ADC " Shawn Guo
@ 2026-11-03 13:54 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2026-11-03 13:54 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Konrad Dybcio, Abel Vesa, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Bartosz Golaszewski, Dhruvin Rajpura, devicetree,
linux-arm-msm, linux-kernel, Shawn Guo
On Nord RRD, three PMAU0102 (Kai_MV) AMUX pins are wired to
thermistors: Kai instance E's AMUX1 (SDRAM3 THERM) and Kai instance I's
AMUX1/AMUX2 (SDRAM1 THERM, UFS THERM). The remaining Kai AMUX pins
monitor voltage rails.
Describe the thermistor channels with qcom,adc-tm and add a thermal
zone for each.
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/nord-rrd.dts | 84 +++++++++++++++++++++++++++
1 file changed, 84 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/nord-rrd.dts b/arch/arm64/boot/dts/qcom/nord-rrd.dts
index 47978df0af92..ddea691f1c6f 100644
--- a/arch/arm64/boot/dts/qcom/nord-rrd.dts
+++ b/arch/arm64/boot/dts/qcom/nord-rrd.dts
@@ -53,6 +53,62 @@ bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
clock-div = <2>;
};
};
+
+ thermal-zones {
+ sdram3_thermal: sdram3-thermal {
+ thermal-sensors = <&pmau0102_e_adc ADC5_GEN3_AMUX1_THM_100K_PU(4)>;
+
+ trips {
+ trip0 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ trip1 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ sdram1_thermal: sdram1-thermal {
+ thermal-sensors = <&pmau0102_i_adc ADC5_GEN3_AMUX1_THM_100K_PU(8)>;
+
+ trips {
+ trip0 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ trip1 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ ufs_thermal: ufs-thermal {
+ thermal-sensors = <&pmau0102_i_adc ADC5_GEN3_AMUX2_THM_100K_PU(8)>;
+
+ trips {
+ trip0 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ trip1 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+ };
};
&apps_rsc {
@@ -377,6 +433,34 @@ rtc@32 {
};
};
+&pmau0102_e_adc {
+ channel@444 {
+ reg = <ADC5_GEN3_AMUX1_THM_100K_PU(4)>;
+ label = "pmau0102_e_sdram3_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,adc-tm;
+ };
+};
+
+&pmau0102_i_adc {
+ channel@844 {
+ reg = <ADC5_GEN3_AMUX1_THM_100K_PU(8)>;
+ label = "pmau0102_i_sdram1_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,adc-tm;
+ };
+
+ channel@845 {
+ reg = <ADC5_GEN3_AMUX2_THM_100K_PU(8)>;
+ label = "pmau0102_i_ufs_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,adc-tm;
+ };
+};
+
&qupv3_0 {
firmware-name = "qcom/nord/qupv3fw.elf";
--
2.43.0
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-11-03 13:55 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-03 13:54 [PATCH RFC v2 0/2] arm64: dts: qcom: nord: Add ADC-TM thermistor channels Shawn Guo
2026-11-03 13:54 ` [PATCH RFC v2 1/2] arm64: dts: qcom: nord-ride-embedded: Add PMIC ADC " Shawn Guo
2026-11-03 13:54 ` [PATCH RFC v2 2/2] arm64: dts: qcom: nord-rrd: " Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®