[PATCH v2 0/5] phy: qcom-mipi-csi2: Add D-PHY support for sa8775p, qcs8300 and sc7280

[Anusha Arun Nandi <anusha.nandi@oss.qualcomm.com>]

This series extends the generic Qualcomm MIPI CSI2 PHY driver
(drivers/phy/qualcomm/phy-qcom-mipi-csi2-*) with three additional
CSIPHY variants: SA8775P, QCS8300 and SC7280. The driver currently
only supports x1e80100; these SoCs let CAMSS consume the CSIPHY through
the common PHY framework instead of the CSIPHY logic embedded in the
legacy in-tree CAMSS driver.

QCS8300 shares the same CSIPHY D-PHY hardware as SA8775P, so it does
not need its own of_device_id entry: the qcom,csi2-phy.yaml binding
declares "qcom,sa8775p-csi2-phy" as QCS8300's fallback compatible, and
QCS8300 CSIPHY nodes bind through patch 4's existing
"qcom,sa8775p-csi2-phy" match entry.

Tested on sa8775p, qcs8300 and sc7280.

Anusha Arun Nandi (5):
  dt-bindings: phy: qcom: Add common qcom,csi2-phy
  phy: qcom-mipi-csi2: Make timer and OPP clock names configurable
  phy: qcom-mipi-csi2: Make OPP table optional
  phy: qcom-mipi-csi2: Add sa8775p D-PHY support
  phy: qcom-mipi-csi2: Add sc7280 D-PHY provider

 .../bindings/phy/qcom,csi2-phy.yaml           | 176 +++++++++++++
 .../qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c    | 233 +++++++++++++++++-
 .../phy/qualcomm/phy-qcom-mipi-csi2-core.c    |  76 +++---
 drivers/phy/qualcomm/phy-qcom-mipi-csi2.h     |   5 +
 4 files changed, 455 insertions(+), 35 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,csi2-phy.yaml
--
Best regards,
-- 
Anusha Arun Nandi <anusha.nandi@oss.qualcomm.com>
-- 
2.34.1