[PATCH v2 1/5] dt-bindings: phy: qcom: Add common qcom,csi2-phy

[Anusha Arun Nandi <anusha.nandi@oss.qualcomm.com>]

SA8775P, QCS8300 and SC7280 CSI2 PHYs are bit-for-bit identical in
devicetree shape (ports, bus-type, data-lanes, operating-points-v2,
clocks, single "top" power-domain, vdda-phy/vdda-pll supplies).

Describe all three with a single qcom,csi2-phy.yaml and a compatible
oneOf, rather than one standalone schema per SoC. QCS8300 is further
required to be paired with a qcom,sa8775p-csi2-phy fallback
compatible, the same way other Qualcomm bindings express full
hardware compatibility between two SoCs (see qcom,qusb2-phy.yaml);
this lets the driver bind QCS8300 nodes via its qcom,sa8775p-csi2-phy
match entry rather than carrying a duplicate one.

qcom,x1e80100-csi2-phy.yaml is a separate PHY with a different shape
(3 clocks, 3 power-domains, different supply names, DPHY split-mode
support) and is left untouched.

Reviewed-by: Jigarkumar Zala <jigarkumar.zala@oss.qualcomm.com>
Signed-off-by: Anusha Arun Nandi <anusha.nandi@oss.qualcomm.com>
---
 .../bindings/phy/qcom,csi2-phy.yaml           | 176 ++++++++++++++++++
 1 file changed, 176 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,csi2-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/qcom,csi2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,csi2-phy.yaml
new file mode 100644
index 000000000000..5d25547528bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,csi2-phy.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2026 Qualcomm Innovation Center, Inc. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,csi2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm CSI2 PHY
+
+maintainers:
+  - Anusha Arun Nandi <anusha.nandi@oss.qualcomm.com>
+
+description:
+  Qualcomm MIPI CSI2 D-PHY. Connects MIPI CSI2 sensors to Qualcomm's Camera
+  CSI Decoder.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,sa8775p-csi2-phy
+          - qcom,sc7280-csi2-phy
+      - items:
+          - enum:
+              - qcom,qcs8300-csi2-phy
+          - const: qcom,sa8775p-csi2-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: timer
+
+  interrupts:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  opp-table:
+    type: object
+
+  power-domains:
+    items:
+      - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: top
+
+  vdda-phy-supply:
+    description: Phandle to PHY supply.
+
+  vdda-pll-supply:
+    description: Phandle to PLL supply.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description:
+          Sensor input. A single sensor is described by a single endpoint
+          with one to four data lanes, numbered 1-4. The clock lane is
+          position 0.
+
+        unevaluatedProperties: false
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+                default: 4
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  minimum: 1
+                  maximum: 4
+                description:
+                  Data lane positions following this endpoint's clock
+                  lane. Positions are a per-port logical numbering, not
+                  package pad or ball positions.
+
+            required:
+              - data-lanes
+              - remote-endpoint
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output to the CAMSS CSID controller.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - operating-points-v2
+  - power-domains
+  - power-domain-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sa8775p-camcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    phy@ac9c000 {
+        compatible = "qcom,sa8775p-csi2-phy";
+        reg = <0x0ac9c000 0x2000>;
+
+        clocks = <&camcc CAM_CC_CSIPHY0_CLK>,
+                 <&camcc CAM_CC_CSI0PHYTIMER_CLK>;
+        clock-names = "core",
+                      "timer";
+
+        interrupts = <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>;
+
+        operating-points-v2 = <&csiphy_opp_table>;
+
+        power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+        power-domain-names = "top";
+
+        vdda-phy-supply = <&vreg_l4a>;
+        vdda-pll-supply = <&vreg_l1c>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                csiphy0_in: endpoint {
+                    bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&sensor_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                csiphy0_out: endpoint {
+                    remote-endpoint = <&csid_in>;
+                };
+            };
+        };
+
+        csiphy_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-300000000 {
+                opp-hz = /bits/ 64 <300000000>;
+            };
+        };
+    };
-- 
2.34.1