mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jonathan Brown <jbrown@emergence.uk.net>
To: Linus Torvalds <torvalds@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Linux 2.6.3-rc4
Date: Tue, 17 Feb 2004 18:56:46 +0000	[thread overview]
Message-ID: <403263EE.9010609@emergence.uk.net> (raw)
In-Reply-To: <Pine.LNX.4.58.0402161945540.30742@home.osdl.org>

Linus Torvalds wrote:
> Ok,
>  I'm planning on doing the final 2.6.3 tomorrow, so please test this 
> final -rc.
> 
> Most notably, this should support ppc/ppc64 out-of-the-box, complete with
> G5 support (64-bit). Special thanks to BenH who made sure the new radeonfb
> driver works on a wide variety of hardware (a number of the fixes here
> relative to -rc3 was making sure the driver works on regular x86 laptops).

There are still two problems with the radeonfb on my IBM X31:

1) The screen is garbled when the fb kicks in at boot - its not 
converting the text from the VGA console correctly. I have a photo of 
this here: http://emergence.uk.net/radeonfb_corruption.jpeg

2) If I run X and then exit X or switch to a fb vt then the bottom line 
doesn't clear when scrolling and running `clear` only clears the middle 
line of pixels on each line of text.

radeonfb_pci_register BEGIN
radeonfb: probed DDR SGRAM 16384k videoram
radeonfb: mapped 16384k videoram
radeonfb: Invalid ROM signature 0 should be 0xaa55
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=144.00 Mhz, 
System=144.00 MHz
1 chips in connector info
  - chip 1 has 1 connectors
   * connector 0 of type 2 (CRT) : 2300
Starting monitor auto detection...
Non-DDC laptop panel detected
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: 1024x768
radeonfb: detected LVDS panel size from BIOS: 1024x768
BIOS provided panel power delay: 1000
radeondb: BIOS provided dividers will be used
ref_divider = 8
post_divider = 2
fbk_divider = 4d
Scanning BIOS table ...
  320 x 350
  320 x 400
  320 x 400
  320 x 480
  400 x 600
  512 x 384
  640 x 350
  640 x 400
  640 x 475
  640 x 480
  720 x 480
  720 x 576
  800 x 600
  848 x 480
  1024 x 768
Found panel in BIOS table:
   hblank: 320
   hOver_plus: 16
   hSync_width: 136
   vblank: 38
   vOver_plus: 2
   vSync_width: 6
   clock: 6500
Setting up default mode based on panel info
radeonfb: Power Management enabled for Mobility chipsets
radeonfb: ATI Radeon LY  DDR SGRAM 16 MB
radeonfb_pci_register END


Jonathan Brown
http://emergence.uk.net/

  parent reply	other threads:[~2004-02-17 18:56 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-02-17  3:51 Linus Torvalds
2004-02-17  6:19 ` Felix Seeger
2004-02-17  8:54 ` Martin Diehl
2004-02-17  9:27   ` Martin Diehl
2004-02-17 15:39   ` Bartlomiej Zolnierkiewicz
2004-02-17 16:21 ` Linux 2.6.3-rc4 (compile stats) John Cherry
2004-02-17 18:45 ` Linux 2.6.3-rc4 GCS
2004-02-17 19:09   ` Linus Torvalds
2004-02-17 20:05     ` Adrian Bunk
2004-02-17 20:16       ` Linus Torvalds
2004-02-17 22:59         ` Adrian Bunk
2004-02-17 23:11           ` Linus Torvalds
2004-02-17 23:37             ` Radeon issue on x86 Benjamin Herrenschmidt
2004-02-18  0:17               ` Linus Torvalds
2004-02-18  0:33                 ` Benjamin Herrenschmidt
2004-02-18  0:00             ` Linux 2.6.3-rc4 Adrian Bunk
2004-02-18  1:28               ` Roman Zippel
2004-02-18  0:39             ` Roman Zippel
2004-02-18  1:06             ` Roman Zippel
2004-02-18  2:45           ` Roman Zippel
2004-02-18  2:58             ` Linus Torvalds
2004-02-18  0:15       ` Roman Zippel
2004-02-18  0:21     ` GCS
2004-02-17 18:56 ` Jonathan Brown [this message]
2004-02-17 19:06   ` Linus Torvalds
2004-02-18 10:18   ` Andreas Happe
2004-02-18  4:06 ` Stephen Rothwell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=403263EE.9010609@emergence.uk.net \
    --to=jbrown@emergence.uk.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=torvalds@osdl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®