mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jinjie Ruan <ruanjinjie@huawei.com>
To: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Cc: <catalin.marinas@arm.com>, <will@kernel.org>, <oleg@redhat.com>,
	<sstabellini@kernel.org>, <mark.rutland@arm.com>,
	<puranjay@kernel.org>, <broonie@kernel.org>, <mbenes@suse.cz>,
	<ryan.roberts@arm.com>, <akpm@linux-foundation.org>,
	<chenl311@chinatelecom.cn>, <anshuman.khandual@arm.com>,
	<kristina.martsenko@arm.com>, <liaochang1@huawei.com>,
	<ardb@kernel.org>, <leitao@debian.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <xen-devel@lists.xenproject.org>
Subject: Re: [PATCH -next v7 5/7] arm64: entry: Refactor preempt_schedule_irq() check code
Date: Wed, 6 Aug 2025 14:26:31 +0800	[thread overview]
Message-ID: <5d81d30f-8dd4-d74c-7c8a-0714dafc09fe@huawei.com> (raw)
In-Reply-To: <44fd646c-4e31-4ca6-9e22-f715ad19e0d7@arm.com>



On 2025/8/5 23:06, Ada Couprie Diaz wrote:
> Hi Jinjie,
> 
> On 29/07/2025 02:54, Jinjie Ruan wrote:
>> ARM64 requires an additional check whether to reschedule on return
>> from interrupt. So add arch_irqentry_exit_need_resched() as the default
>> NOP implementation and hook it up into the need_resched() condition in
>> raw_irqentry_exit_cond_resched(). This allows ARM64 to implement
>> the architecture specific version for switching over to
>> the generic entry code.
> I was a bit confused by this, as I didn't see the link with the generic
> entry
> given you implement `raw_irqentry_exit_cond_resched()` in arch/arm64
> as well in this patch : I expected the arm64 implementation to be added.
> I share more thoughts below.
> 
> What do you think about something along those lines ?
> 
>     Compared to the generic entry code, arm64 does additional checks
>     when deciding to reschedule on return from an interrupt.
>     Introduce arch_irqentry_exit_need_resched() in the need_resched()
> condition
>     of the generic raw_irqentry_exit_cond_resched(), with a NOP default.
>     This will allow arm64 to implement its architecture specific checks
> when
>     switching over to the generic entry code.

This revision makes it easier for people to understand.

> 
>> [...]
>> diff --git a/kernel/entry/common.c b/kernel/entry/common.c
>> index b82032777310..4aa9656fa1b4 100644
>> --- a/kernel/entry/common.c
>> +++ b/kernel/entry/common.c
>> @@ -142,6 +142,20 @@ noinstr irqentry_state_t irqentry_enter(struct
>> pt_regs *regs)
>>       return ret;
>>   }
>>   +/**
>> + * arch_irqentry_exit_need_resched - Architecture specific need
>> resched function
>> + *
>> + * Invoked from raw_irqentry_exit_cond_resched() to check if need
>> resched.
> Very nit : "to check if resched is needed." ?

This is good.

>> + * Defaults return true.
>> + *
>> + * The main purpose is to permit arch to skip preempt a task from an
>> IRQ.
> If feel that "to avoid preemption of a task" instead of "to skip preempt
> a task"
> would make this much clearer, what do you think ?

Yes, this is more clearer.

>> + */
>> +static inline bool arch_irqentry_exit_need_resched(void);
>> +
>> +#ifndef arch_irqentry_exit_need_resched
>> +static inline bool arch_irqentry_exit_need_resched(void) { return
>> true; }
>> +#endif
>> +
> 
> I've had some trouble reviewing this patch : on the one hand because
> I didn't notice `arch_irqentry_exit_need_resched()` was added in
> the common entry code, which is on me !
> On the other hand, I felt that the patch itself was a bit disconnected :
> we add `arch_irqentry_exit_need_resched()` in the common entry code,
> with a default NOP, but in the same function we add to arm64,
> while mentioning that this is for arm64's additional checks,
> which we only implement in patch 7.
> 
> Would it make sense to move the `arch_irqentry_exit_need_resched()`
> part of the patch to patch 7, so that the introduction and
> arch-specific implementation appear together ?
> To me it seems easier to wrap my head around, as it would look like
> "Move arm64 to generic entry, but it does additional checks : add a new
> arch-specific function controlling re-scheduling, defaulting to true,
> and implement it for arm64". I feel it could help making patch 7's
> commit message clearer as well.
> 
> From what I gathered on the archive `arch_irqentry_exit_need_resched()`
> being added here was suggested previously, so others might not have the
> same opinion.
> 
> Maybe improving the commit message and comment for this would be enough
> as well, as per my suggestions above.
> 
> 
> Otherwise the changes make sense and I don't see any functional issues !
> 
> Thanks,
> Ada
> 
> 

  reply	other threads:[~2025-08-06  6:26 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-29  1:54 [PATCH -next v7 0/7] arm64: entry: Convert to generic irq entry Jinjie Ruan
2025-07-29  1:54 ` [PATCH -next v7 1/7] arm64: ptrace: Replace interrupts_enabled() with regs_irqs_disabled() Jinjie Ruan
2025-08-05 15:05   ` Ada Couprie Diaz
2025-08-06  2:31     ` Jinjie Ruan
2025-07-29  1:54 ` [PATCH -next v7 2/7] arm64: entry: Refactor the entry and exit for exceptions from EL1 Jinjie Ruan
2025-08-05 15:06   ` Ada Couprie Diaz
2025-08-06  2:49     ` Jinjie Ruan
2025-08-11 16:01       ` Ada Couprie Diaz
2025-08-12 11:01   ` Mark Rutland
2025-07-29  1:54 ` [PATCH -next v7 3/7] arm64: entry: Rework arm64_preempt_schedule_irq() Jinjie Ruan
2025-08-05 15:06   ` Ada Couprie Diaz
2025-07-29  1:54 ` [PATCH -next v7 4/7] arm64: entry: Use preempt_count() and need_resched() helper Jinjie Ruan
2025-08-05 15:06   ` Ada Couprie Diaz
2025-07-29  1:54 ` [PATCH -next v7 5/7] arm64: entry: Refactor preempt_schedule_irq() check code Jinjie Ruan
2025-08-05 15:06   ` Ada Couprie Diaz
2025-08-06  6:26     ` Jinjie Ruan [this message]
2025-08-06  6:39     ` Jinjie Ruan
2025-08-11 16:02       ` Ada Couprie Diaz
2025-08-11 16:02   ` Ada Couprie Diaz
2025-08-14  8:49     ` Jinjie Ruan
2025-08-12 11:13   ` Mark Rutland
2025-08-14  9:31     ` Jinjie Ruan
2025-07-29  1:54 ` [PATCH -next v7 6/7] arm64: entry: Move arm64_preempt_schedule_irq() into __exit_to_kernel_mode() Jinjie Ruan
2025-08-05 15:07   ` Ada Couprie Diaz
2025-07-29  1:54 ` [PATCH -next v7 7/7] arm64: entry: Switch to generic IRQ entry Jinjie Ruan
2025-08-05 15:07   ` Ada Couprie Diaz
2025-08-06  6:59     ` Jinjie Ruan
2025-08-05 15:08 ` [PATCH -next v7 0/7] arm64: entry: Convert to generic irq entry Ada Couprie Diaz
2025-08-06  8:11   ` Jinjie Ruan
2025-08-11 16:03     ` Ada Couprie Diaz
2025-08-14  9:37       ` Jinjie Ruan
2025-08-12 11:19 ` Mark Rutland
2025-08-14  9:39   ` Jinjie Ruan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5d81d30f-8dd4-d74c-7c8a-0714dafc09fe@huawei.com \
    --to=ruanjinjie@huawei.com \
    --cc=ada.coupriediaz@arm.com \
    --cc=akpm@linux-foundation.org \
    --cc=anshuman.khandual@arm.com \
    --cc=ardb@kernel.org \
    --cc=broonie@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=chenl311@chinatelecom.cn \
    --cc=kristina.martsenko@arm.com \
    --cc=leitao@debian.org \
    --cc=liaochang1@huawei.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mbenes@suse.cz \
    --cc=oleg@redhat.com \
    --cc=puranjay@kernel.org \
    --cc=ryan.roberts@arm.com \
    --cc=sstabellini@kernel.org \
    --cc=will@kernel.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®