From: Stafford Horne <shorne@gmail.com>
To: Jonas Bonn <jonas@southpole.se>,
Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: linux@roeck-us.net, openrisc@lists.librecores.org,
linux-kernel@vger.kernel.org, Stafford Horne <shorne@gmail.com>
Subject: [PATCH v4 03/24] openrisc: tlb miss handler optimizations
Date: Fri, 24 Feb 2017 13:32:23 +0900 [thread overview]
Message-ID: <742fb582b4540a7b59427dc67be1fe4a5eac7078.1487910170.git.shorne@gmail.com> (raw)
In-Reply-To: <cover.1487910170.git.shorne@gmail.com>
In-Reply-To: <cover.1487910170.git.shorne@gmail.com>
From: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
By slightly reorganizing the code, the number of registers
used in the tlb miss handlers can be reduced by two,
thus removing the need to save them to memory.
Also, some dead and commented out code is removed.
No functional change.
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Stafford Horne <shorne@gmail.com>
---
arch/openrisc/kernel/head.S | 141 +++++++++++++++-----------------------------
1 file changed, 46 insertions(+), 95 deletions(-)
diff --git a/arch/openrisc/kernel/head.S b/arch/openrisc/kernel/head.S
index f147933..2346c5b 100644
--- a/arch/openrisc/kernel/head.S
+++ b/arch/openrisc/kernel/head.S
@@ -971,8 +971,6 @@ ENTRY(dtlb_miss_handler)
EXCEPTION_STORE_GPR2
EXCEPTION_STORE_GPR3
EXCEPTION_STORE_GPR4
- EXCEPTION_STORE_GPR5
- EXCEPTION_STORE_GPR6
/*
* get EA of the miss
*/
@@ -980,91 +978,70 @@ ENTRY(dtlb_miss_handler)
/*
* pmd = (pmd_t *)(current_pgd + pgd_index(daddr));
*/
- GET_CURRENT_PGD(r3,r5) // r3 is current_pgd, r5 is temp
+ GET_CURRENT_PGD(r3,r4) // r3 is current_pgd, r4 is temp
l.srli r4,r2,0x18 // >> PAGE_SHIFT + (PAGE_SHIFT - 2)
l.slli r4,r4,0x2 // to get address << 2
- l.add r5,r4,r3 // r4 is pgd_index(daddr)
+ l.add r3,r4,r3 // r4 is pgd_index(daddr)
/*
* if (pmd_none(*pmd))
* goto pmd_none:
*/
- tophys (r4,r5)
+ tophys (r4,r3)
l.lwz r3,0x0(r4) // get *pmd value
l.sfne r3,r0
l.bnf d_pmd_none
- l.andi r3,r3,~PAGE_MASK //0x1fff // ~PAGE_MASK
- /*
- * if (pmd_bad(*pmd))
- * pmd_clear(pmd)
- * goto pmd_bad:
- */
-// l.sfeq r3,r0 // check *pmd value
-// l.bf d_pmd_good
- l.addi r3,r0,0xffffe000 // PAGE_MASK
-// l.j d_pmd_bad
-// l.sw 0x0(r4),r0 // clear pmd
+ l.addi r3,r0,0xffffe000 // PAGE_MASK
+
d_pmd_good:
/*
* pte = *pte_offset(pmd, daddr);
*/
l.lwz r4,0x0(r4) // get **pmd value
l.and r4,r4,r3 // & PAGE_MASK
- l.srli r5,r2,0xd // >> PAGE_SHIFT, r2 == EEAR
- l.andi r3,r5,0x7ff // (1UL << PAGE_SHIFT - 2) - 1
+ l.srli r2,r2,0xd // >> PAGE_SHIFT, r2 == EEAR
+ l.andi r3,r2,0x7ff // (1UL << PAGE_SHIFT - 2) - 1
l.slli r3,r3,0x2 // to get address << 2
l.add r3,r3,r4
- l.lwz r2,0x0(r3) // this is pte at last
+ l.lwz r3,0x0(r3) // this is pte at last
/*
* if (!pte_present(pte))
*/
- l.andi r4,r2,0x1
+ l.andi r4,r3,0x1
l.sfne r4,r0 // is pte present
l.bnf d_pte_not_present
- l.addi r3,r0,0xffffe3fa // PAGE_MASK | DTLB_UP_CONVERT_MASK
+ l.addi r4,r0,0xffffe3fa // PAGE_MASK | DTLB_UP_CONVERT_MASK
/*
* fill DTLB TR register
*/
- l.and r4,r2,r3 // apply the mask
+ l.and r4,r3,r4 // apply the mask
// Determine number of DMMU sets
- l.mfspr r6, r0, SPR_DMMUCFGR
- l.andi r6, r6, SPR_DMMUCFGR_NTS
- l.srli r6, r6, SPR_DMMUCFGR_NTS_OFF
+ l.mfspr r2, r0, SPR_DMMUCFGR
+ l.andi r2, r2, SPR_DMMUCFGR_NTS
+ l.srli r2, r2, SPR_DMMUCFGR_NTS_OFF
l.ori r3, r0, 0x1
- l.sll r3, r3, r6 // r3 = number DMMU sets DMMUCFGR
- l.addi r6, r3, -1 // r6 = nsets mask
- l.and r5, r5, r6 // calc offset: & (NUM_TLB_ENTRIES-1)
+ l.sll r3, r3, r2 // r3 = number DMMU sets DMMUCFGR
+ l.addi r2, r3, -1 // r2 = nsets mask
+ l.mfspr r3, r0, SPR_EEAR_BASE
+ l.srli r3, r3, 0xd // >> PAGE_SHIFT
+ l.and r2, r3, r2 // calc offset: & (NUM_TLB_ENTRIES-1)
//NUM_TLB_ENTRIES
- l.mtspr r5,r4,SPR_DTLBTR_BASE(0)
+ l.mtspr r2,r4,SPR_DTLBTR_BASE(0)
/*
* fill DTLB MR register
*/
- l.mfspr r2,r0,SPR_EEAR_BASE
- l.addi r3,r0,0xffffe000 // PAGE_MASK
- l.and r4,r2,r3 // apply PAGE_MASK to EA (__PHX__ do we really need this?)
- l.ori r4,r4,0x1 // set hardware valid bit: DTBL_MR entry
- l.mtspr r5,r4,SPR_DTLBMR_BASE(0)
+ l.slli r3, r3, 0xd /* << PAGE_SHIFT => EA & PAGE_MASK */
+ l.ori r4,r3,0x1 // set hardware valid bit: DTBL_MR entry
+ l.mtspr r2,r4,SPR_DTLBMR_BASE(0)
EXCEPTION_LOAD_GPR2
EXCEPTION_LOAD_GPR3
EXCEPTION_LOAD_GPR4
- EXCEPTION_LOAD_GPR5
- EXCEPTION_LOAD_GPR6
- l.rfe
-d_pmd_bad:
- l.nop 1
- EXCEPTION_LOAD_GPR2
- EXCEPTION_LOAD_GPR3
- EXCEPTION_LOAD_GPR4
- EXCEPTION_LOAD_GPR5
- EXCEPTION_LOAD_GPR6
l.rfe
d_pmd_none:
d_pte_not_present:
EXCEPTION_LOAD_GPR2
EXCEPTION_LOAD_GPR3
EXCEPTION_LOAD_GPR4
- EXCEPTION_LOAD_GPR5
- EXCEPTION_LOAD_GPR6
EXCEPTION_HANDLE(_dtlb_miss_page_fault_handler)
/* ==============================================[ ITLB miss handler ]=== */
@@ -1072,8 +1049,6 @@ ENTRY(itlb_miss_handler)
EXCEPTION_STORE_GPR2
EXCEPTION_STORE_GPR3
EXCEPTION_STORE_GPR4
- EXCEPTION_STORE_GPR5
- EXCEPTION_STORE_GPR6
/*
* get EA of the miss
*/
@@ -1083,30 +1058,19 @@ ENTRY(itlb_miss_handler)
* pmd = (pmd_t *)(current_pgd + pgd_index(daddr));
*
*/
- GET_CURRENT_PGD(r3,r5) // r3 is current_pgd, r5 is temp
+ GET_CURRENT_PGD(r3,r4) // r3 is current_pgd, r5 is temp
l.srli r4,r2,0x18 // >> PAGE_SHIFT + (PAGE_SHIFT - 2)
l.slli r4,r4,0x2 // to get address << 2
- l.add r5,r4,r3 // r4 is pgd_index(daddr)
+ l.add r3,r4,r3 // r4 is pgd_index(daddr)
/*
* if (pmd_none(*pmd))
* goto pmd_none:
*/
- tophys (r4,r5)
+ tophys (r4,r3)
l.lwz r3,0x0(r4) // get *pmd value
l.sfne r3,r0
l.bnf i_pmd_none
- l.andi r3,r3,0x1fff // ~PAGE_MASK
- /*
- * if (pmd_bad(*pmd))
- * pmd_clear(pmd)
- * goto pmd_bad:
- */
-
-// l.sfeq r3,r0 // check *pmd value
-// l.bf i_pmd_good
- l.addi r3,r0,0xffffe000 // PAGE_MASK
-// l.j i_pmd_bad
-// l.sw 0x0(r4),r0 // clear pmd
+ l.addi r3,r0,0xffffe000 // PAGE_MASK
i_pmd_good:
/*
@@ -1115,35 +1079,36 @@ i_pmd_good:
*/
l.lwz r4,0x0(r4) // get **pmd value
l.and r4,r4,r3 // & PAGE_MASK
- l.srli r5,r2,0xd // >> PAGE_SHIFT, r2 == EEAR
- l.andi r3,r5,0x7ff // (1UL << PAGE_SHIFT - 2) - 1
+ l.srli r2,r2,0xd // >> PAGE_SHIFT, r2 == EEAR
+ l.andi r3,r2,0x7ff // (1UL << PAGE_SHIFT - 2) - 1
l.slli r3,r3,0x2 // to get address << 2
l.add r3,r3,r4
- l.lwz r2,0x0(r3) // this is pte at last
+ l.lwz r3,0x0(r3) // this is pte at last
/*
* if (!pte_present(pte))
*
*/
- l.andi r4,r2,0x1
+ l.andi r4,r3,0x1
l.sfne r4,r0 // is pte present
l.bnf i_pte_not_present
- l.addi r3,r0,0xffffe03a // PAGE_MASK | ITLB_UP_CONVERT_MASK
+ l.addi r4,r0,0xffffe03a // PAGE_MASK | ITLB_UP_CONVERT_MASK
/*
* fill ITLB TR register
*/
- l.and r4,r2,r3 // apply the mask
- l.andi r3,r2,0x7c0 // _PAGE_EXEC | _PAGE_SRE | _PAGE_SWE | _PAGE_URE | _PAGE_UWE
-// l.andi r3,r2,0x400 // _PAGE_EXEC
+ l.and r4,r3,r4 // apply the mask
+ l.andi r3,r3,0x7c0 // _PAGE_EXEC | _PAGE_SRE | _PAGE_SWE | _PAGE_URE | _PAGE_UWE
l.sfeq r3,r0
l.bf itlb_tr_fill //_workaround
// Determine number of IMMU sets
- l.mfspr r6, r0, SPR_IMMUCFGR
- l.andi r6, r6, SPR_IMMUCFGR_NTS
- l.srli r6, r6, SPR_IMMUCFGR_NTS_OFF
+ l.mfspr r2, r0, SPR_IMMUCFGR
+ l.andi r2, r2, SPR_IMMUCFGR_NTS
+ l.srli r2, r2, SPR_IMMUCFGR_NTS_OFF
l.ori r3, r0, 0x1
- l.sll r3, r3, r6 // r3 = number IMMU sets IMMUCFGR
- l.addi r6, r3, -1 // r6 = nsets mask
- l.and r5, r5, r6 // calc offset: & (NUM_TLB_ENTRIES-1)
+ l.sll r3, r3, r2 // r3 = number IMMU sets IMMUCFGR
+ l.addi r2, r3, -1 // r2 = nsets mask
+ l.mfspr r3, r0, SPR_EEAR_BASE
+ l.srli r3, r3, 0xd // >> PAGE_SHIFT
+ l.and r2, r3, r2 // calc offset: & (NUM_TLB_ENTRIES-1)
/*
* __PHX__ :: fixme
@@ -1155,38 +1120,24 @@ i_pmd_good:
itlb_tr_fill_workaround:
l.ori r4,r4,0xc0 // | (SPR_ITLBTR_UXE | ITLBTR_SXE)
itlb_tr_fill:
- l.mtspr r5,r4,SPR_ITLBTR_BASE(0)
+ l.mtspr r2,r4,SPR_ITLBTR_BASE(0)
/*
* fill DTLB MR register
*/
- l.mfspr r2,r0,SPR_EEAR_BASE
- l.addi r3,r0,0xffffe000 // PAGE_MASK
- l.and r4,r2,r3 // apply PAGE_MASK to EA (__PHX__ do we really need this?)
- l.ori r4,r4,0x1 // set hardware valid bit: DTBL_MR entry
- l.mtspr r5,r4,SPR_ITLBMR_BASE(0)
+ l.slli r3, r3, 0xd /* << PAGE_SHIFT => EA & PAGE_MASK */
+ l.ori r4,r3,0x1 // set hardware valid bit: ITBL_MR entry
+ l.mtspr r2,r4,SPR_ITLBMR_BASE(0)
EXCEPTION_LOAD_GPR2
EXCEPTION_LOAD_GPR3
EXCEPTION_LOAD_GPR4
- EXCEPTION_LOAD_GPR5
- EXCEPTION_LOAD_GPR6
l.rfe
-i_pmd_bad:
- l.nop 1
- EXCEPTION_LOAD_GPR2
- EXCEPTION_LOAD_GPR3
- EXCEPTION_LOAD_GPR4
- EXCEPTION_LOAD_GPR5
- EXCEPTION_LOAD_GPR6
- l.rfe
i_pmd_none:
i_pte_not_present:
EXCEPTION_LOAD_GPR2
EXCEPTION_LOAD_GPR3
EXCEPTION_LOAD_GPR4
- EXCEPTION_LOAD_GPR5
- EXCEPTION_LOAD_GPR6
EXCEPTION_HANDLE(_itlb_miss_page_fault_handler)
/* ==============================================[ boot tlb handlers ]=== */
--
2.9.3
next prev parent reply other threads:[~2017-02-24 4:33 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-24 4:32 [PATCH v4 00/24] OpenRISC patches for 4.11 Stafford Horne
2017-02-24 4:32 ` [PATCH v4 01/24] openrisc: use SPARSE_IRQ Stafford Horne
2017-02-24 4:32 ` [PATCH v4 02/24] openrisc: add cache way information to cpuinfo Stafford Horne
2017-02-24 4:32 ` Stafford Horne [this message]
2017-02-24 4:32 ` [PATCH v4 04/24] openrisc: head: use THREAD_SIZE instead of magic constant Stafford Horne
2017-02-24 4:32 ` [PATCH v4 05/24] openrisc: head: refactor out tlb flush into it's own function Stafford Horne
2017-02-24 9:57 ` Jonas Bonn
2017-02-24 10:54 ` Stefan Kristiansson
2017-02-24 12:48 ` Jonas Bonn
2017-02-24 13:54 ` Stefan Kristiansson
2017-02-24 19:20 ` Stafford Horne
2017-02-24 4:32 ` [PATCH v4 06/24] openrisc: add l.lwa/l.swa emulation Stafford Horne
2017-02-24 9:27 ` Jonas Bonn
2017-02-24 19:53 ` Stafford Horne
2017-02-24 4:32 ` [PATCH v4 07/24] openrisc: add atomic bitops Stafford Horne
2017-02-24 10:56 ` Peter Zijlstra
2017-02-24 19:16 ` Stafford Horne
2017-02-24 4:32 ` [PATCH v4 08/24] openrisc: add cmpxchg and xchg implementations Stafford Horne
2017-02-24 4:32 ` [PATCH v4 09/24] openrisc: add optimized atomic operations Stafford Horne
2017-02-24 4:32 ` [PATCH v4 10/24] openrisc: add futex_atomic_* implementations Stafford Horne
2017-02-24 4:32 ` [PATCH v4 11/24] openrisc: remove unnecessary stddef.h include Stafford Horne
2017-02-24 4:32 ` [PATCH v4 12/24] openrisc: Fix the bitmask for the unit present register Stafford Horne
2017-02-24 4:32 ` [PATCH v4 13/24] openrisc: Initial support for the idle state Stafford Horne
2017-02-24 4:32 ` [PATCH v4 14/24] openrisc: Add optimized memset Stafford Horne
2017-02-24 4:32 ` [PATCH v4 15/24] openrisc: Add optimized memcpy routine Stafford Horne
2017-02-24 4:32 ` [PATCH v4 16/24] openrisc: Add .gitignore Stafford Horne
2017-02-24 4:32 ` [PATCH v4 17/24] MAINTAINERS: Add the openrisc official repository Stafford Horne
2017-02-24 4:32 ` [PATCH v4 18/24] scripts/checkstack.pl: Add openrisc support Stafford Horne
2017-02-24 14:42 ` Tobias Klauser
2017-02-24 19:33 ` Stafford Horne
2017-02-24 4:32 ` [PATCH v4 19/24] openrisc: entry: Whitespace and comment cleanups Stafford Horne
2017-02-24 9:45 ` Jonas Bonn
2017-02-24 20:31 ` Stafford Horne
2017-02-24 4:32 ` [PATCH v4 20/24] openrisc: entry: Fix delay slot detection Stafford Horne
2017-02-24 9:32 ` Jonas Bonn
2017-02-24 20:13 ` Stafford Horne
2017-02-24 4:32 ` [PATCH v4 21/24] openrisc: head: Move init strings to rodata section Stafford Horne
2017-02-24 9:28 ` Jonas Bonn
2017-02-24 20:09 ` Stafford Horne
2017-02-24 4:32 ` [PATCH v4 22/24] arch/openrisc/lib/memcpy.c: use correct OR1200 option Stafford Horne
2017-02-24 9:24 ` Jonas Bonn
2017-02-24 19:44 ` Stafford Horne
2017-02-24 4:32 ` [PATCH v4 23/24] openrisc: Export ioremap symbols used by modules Stafford Horne
2017-02-24 4:32 ` [PATCH v4 24/24] openrisc: head: Init r0 to 0 on start Stafford Horne
2017-02-24 9:21 ` Jonas Bonn
2017-02-24 19:35 ` Stafford Horne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=742fb582b4540a7b59427dc67be1fe4a5eac7078.1487910170.git.shorne@gmail.com \
--to=shorne@gmail.com \
--cc=jonas@southpole.se \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=openrisc@lists.librecores.org \
--cc=stefan.kristiansson@saunalahti.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®