mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Anshuman Khandual <anshuman.khandual@arm.com>
To: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>,
	Ryan Roberts <ryan.roberts@arm.com>,
	Ard Biesheuvel <ardb@kernel.org>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/6] arm64/mm: TTBRx_EL1 related changes
Date: Wed, 19 Nov 2025 06:37:00 +0530	[thread overview]
Message-ID: <80c7af9b-ac6a-42fe-981f-c4b6f2cc9d7f@arm.com> (raw)
In-Reply-To: <aRb8ezhQd0c0jp9G@J2N7QTR9R3>

On 14/11/25 3:25 PM, Mark Rutland wrote:
> On Thu, Nov 13, 2025 at 02:48:44PM +0530, Anshuman Khandual wrote:
>> On 03/11/25 10:56 AM, Anshuman Khandual wrote:
>>> This series contains some TTBRx_EL1 related changes, aimed at standardizing
>>> TTBRx_EL1 register field accesses via tools sysreg format and also explains
>>> 52 PA specific handling methods via a new macro along with in code comments
>>>
>>> This series applies on v6.18-rc4
>>>
>>> Cc: Catalin Marinas <catalin.marinas@arm.com>
>>> Cc: Will Deacon <will@kernel.org>
>>> Cc: Ryan Roberts <ryan.roberts@arm.com>
>>> Cc: Ard Biesheuvel <ardb@kernel.org>
>>> Cc: linux-arm-kernel@lists.infradead.org
>>> Cc: linux-kernel@vger.kernel.org
>>>
>>> Anshuman Khandual (6):
>>>   arm64/mm: Directly use TTBRx_EL1_ASID_MASK
>>>   arm64/mm: Directly use TTBRx_EL1_CnP
>>>   arm64/mm: Represent TTBR_BADDR_MASK_52 with TTBRx_EL1_BADDR_MASK
>>>   arm64/mm: Ensure correct 48 bit PA gets into TTBRx_EL1
>>>   arm64/mm: Describe 52 PA folding into TTBRx_EL1
>>>   arm64/mm: Describe TTBR1_BADDR_4852_OFFSET
>>>
>>>  arch/arm64/include/asm/asm-uaccess.h   |  2 +-
>>>  arch/arm64/include/asm/assembler.h     |  3 ++-
>>>  arch/arm64/include/asm/mmu_context.h   |  2 +-
>>>  arch/arm64/include/asm/pgtable-hwdef.h | 23 ++++++++++++++++++++---
>>>  arch/arm64/include/asm/pgtable.h       |  5 +++--
>>>  arch/arm64/include/asm/uaccess.h       |  6 +++---
>>>  arch/arm64/kernel/entry.S              |  2 +-
>>>  arch/arm64/kernel/mte.c                |  4 ++--
>>>  arch/arm64/mm/context.c                |  8 ++++----
>>>  arch/arm64/mm/mmu.c                    |  2 +-
>>>  10 files changed, 38 insertions(+), 19 deletions(-)
>>
>> Gentle ping. Beside [PATCH 4/6] (which can be dropped as indicated by Mark)
>> any concerns regarding reset of these changes here ?
> 
> Overall I don;t think this series actually improves anything; it just
> shuffles things around, and leaves conversions half-done. I don't think
> we must take this as-is.
> 
> For patches 1 and 2, the changes would be fine if we were also getting
> rid of TTBR_ASID_MASK and TTBR_CNP_BIT, but we don't, apparently because
> those are still used by KVM. It feels like those two patches should be
> split into a separate series that *only* moves code over to generate
> sysreg definitions, also updates KVM, and removes the unused legacy
> definitions.

Sure thing. I will spin out a separate series as suggested.
> 
> For patch 3, I think the change makes the code harder to read, and
> harder to understand, because there's no context to explain why we're
> masking out a single bit. I don't think this is actually an improvement.

We are masking out a single bit here as per the ARM DDI 0487
L.B in the page number D24-8540.

------------------------------------------------------------
When TTBR0_EL1.BADDR represents a 52-bit addresses, all of the following apply:
• Bits A[51:48] of the stage 1 translation table base address bits are in register bits[5:2].
• Register bit[1] is RES0.
• The smallest permitted value of x is 6.
• When x>6, register bits[(x-1):6] are RES0.
------------------------------------------------------------

Is not deriving the applicable address mask in the 52 bit PA
context from the original base address mask better than hard
coded mask GENMASK_ULL(47, 2) ? Just wondering - would it be
better to add some more context in the comment above it ?
> See below for related notes for patch 5.
> 
> For patch 4, as above, I think the patch can be dropped.

Agreed.
> 
> For patch 5, this could be OK, but we should define
> TTBR_BADDR_52_PA_PIVOT as (51 - 5) and avoid the magic number entirely.

Agreed.
> IMO it'd be nicer to just extract and re-insert the bits; I think our
> current logic is unnecessarily micro-optimized so that this can be
> implemented with a shifted-OR + AND, whereas I think we could burn a
> temporary register and use BFX + BFI + AND, and that would be clearer as
> to *which* bits we're trying to move.

Will that only be applicable for phys_to_ttbr()'s assembly variant
and the macro definition in <asm/pgtable.h> which does the right
shifted OR followed by AND still remains unchanged ?
> 
> For patch 6, I guess this is fine; I don't have a strong feeling either
> way.

IMHO it will be great to have this patch included.

      reply	other threads:[~2025-11-19  1:07 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-03  5:26 Anshuman Khandual
2025-11-03  5:26 ` [PATCH 1/6] arm64/mm: Directly use TTBRx_EL1_ASID_MASK Anshuman Khandual
2025-11-03  5:26 ` [PATCH 2/6] arm64/mm: Directly use TTBRx_EL1_CnP Anshuman Khandual
2025-11-03  5:26 ` [PATCH 3/6] arm64/mm: Represent TTBR_BADDR_MASK_52 with TTBRx_EL1_BADDR_MASK Anshuman Khandual
2025-11-03  5:26 ` [PATCH 4/6] arm64/mm: Ensure correct 48 bit PA gets into TTBRx_EL1 Anshuman Khandual
2025-11-04 15:17   ` Mark Rutland
2025-11-05  3:35     ` Anshuman Khandual
2025-11-03  5:26 ` [PATCH 5/6] arm64/mm: Describe 52 PA folding " Anshuman Khandual
2025-11-03  5:26 ` [PATCH 6/6] arm64/mm: Describe TTBR1_BADDR_4852_OFFSET Anshuman Khandual
2025-11-13  9:18 ` [PATCH 0/6] arm64/mm: TTBRx_EL1 related changes Anshuman Khandual
2025-11-14  9:55   ` Mark Rutland
2025-11-19  1:07     ` Anshuman Khandual [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=80c7af9b-ac6a-42fe-981f-c4b6f2cc9d7f@arm.com \
    --to=anshuman.khandual@arm.com \
    --cc=ardb@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=ryan.roberts@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®