* [PATCH] regulator: qcom-rpmh: Fix regulators for PM8550
@ 2023-06-05 11:56 Abel Vesa
2023-06-05 13:45 ` Rajendra Nayak
2023-06-07 17:23 ` Mark Brown
0 siblings, 2 replies; 3+ messages in thread
From: Abel Vesa @ 2023-06-05 11:56 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Liam Girdwood, Mark Brown
Cc: linux-arm-msm, Linux Kernel Mailing List
The PM8550 uses only NLDOs 515 and the LDO 6 through 8 are low voltage
type, so fix accordingly.
Fixes: e6e3776d682d ("regulator: qcom-rpmh: Add support for PM8550 regulators")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
drivers/regulator/qcom-rpmh-regulator.c | 30 ++++++++++++-------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index b0a58c62b1e2..f3b280af0773 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -1057,21 +1057,21 @@ static const struct rpmh_vreg_init_data pm8450_vreg_data[] = {
};
static const struct rpmh_vreg_init_data pm8550_vreg_data[] = {
- RPMH_VREG("ldo1", "ldo%s1", &pmic5_pldo, "vdd-l1-l4-l10"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo515, "vdd-l1-l4-l10"),
RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, "vdd-l2-l13-l14"),
- RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
- RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l1-l4-l10"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo515, "vdd-l3"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo515, "vdd-l1-l4-l10"),
RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l16"),
- RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo_lv, "vdd-l6-l7"),
- RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo_lv, "vdd-l6-l7"),
- RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo_lv, "vdd-l8-l9"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l6-l7"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l6-l7"),
+ RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo, "vdd-l8-l9"),
RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, "vdd-l8-l9"),
- RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo, "vdd-l1-l4-l10"),
- RPMH_VREG("ldo11", "ldo%s11", &pmic5_nldo, "vdd-l11"),
+ RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo515, "vdd-l1-l4-l10"),
+ RPMH_VREG("ldo11", "ldo%s11", &pmic5_nldo515, "vdd-l11"),
RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo, "vdd-l12"),
RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l2-l13-l14"),
RPMH_VREG("ldo14", "ldo%s14", &pmic5_pldo, "vdd-l2-l13-l14"),
- RPMH_VREG("ldo15", "ldo%s15", &pmic5_pldo, "vdd-l15"),
+ RPMH_VREG("ldo15", "ldo%s15", &pmic5_nldo515, "vdd-l15"),
RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l5-l16"),
RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo, "vdd-l17"),
RPMH_VREG("bob1", "bob%s1", &pmic5_bob, "vdd-bob1"),
@@ -1086,9 +1086,9 @@ static const struct rpmh_vreg_init_data pm8550vs_vreg_data[] = {
RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps525_lv, "vdd-s4"),
RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps525_lv, "vdd-s5"),
RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps525_mv, "vdd-s6"),
- RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"),
- RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2"),
- RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo515, "vdd-l1"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo515, "vdd-l2"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo515, "vdd-l3"),
{}
};
@@ -1101,9 +1101,9 @@ static const struct rpmh_vreg_init_data pm8550ve_vreg_data[] = {
RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps525_lv, "vdd-s6"),
RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps525_lv, "vdd-s7"),
RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps525_lv, "vdd-s8"),
- RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"),
- RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2"),
- RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo515, "vdd-l1"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo515, "vdd-l2"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo515, "vdd-l3"),
{}
};
--
2.34.1
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] regulator: qcom-rpmh: Fix regulators for PM8550
2023-06-05 11:56 [PATCH] regulator: qcom-rpmh: Fix regulators for PM8550 Abel Vesa
@ 2023-06-05 13:45 ` Rajendra Nayak
2023-06-07 17:23 ` Mark Brown
1 sibling, 0 replies; 3+ messages in thread
From: Rajendra Nayak @ 2023-06-05 13:45 UTC (permalink / raw)
To: Abel Vesa, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Liam Girdwood, Mark Brown
Cc: linux-arm-msm, Linux Kernel Mailing List
On 6/5/2023 5:26 PM, Abel Vesa wrote:
> The PM8550 uses only NLDOs 515 and the LDO 6 through 8 are low voltage
> type, so fix accordingly.
I was seeing a bunch of LDO initialization's fail while bringing up an
upcoming SoC/Board which uses these same set of PMIC's, some of those
are fixed with this patch, but I still have a couple more failing due
to the voltage that I try to init them to being out of range based on
their voltage range, can you pls check if those are of the right type?
The ones now failing are, ldo12 from pm8550 and smps4 from pm8550ve.
>
> Fixes: e6e3776d682d ("regulator: qcom-rpmh: Add support for PM8550 regulators")
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
> drivers/regulator/qcom-rpmh-regulator.c | 30 ++++++++++++-------------
> 1 file changed, 15 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
> index b0a58c62b1e2..f3b280af0773 100644
> --- a/drivers/regulator/qcom-rpmh-regulator.c
> +++ b/drivers/regulator/qcom-rpmh-regulator.c
> @@ -1057,21 +1057,21 @@ static const struct rpmh_vreg_init_data pm8450_vreg_data[] = {
> };
>
> static const struct rpmh_vreg_init_data pm8550_vreg_data[] = {
> - RPMH_VREG("ldo1", "ldo%s1", &pmic5_pldo, "vdd-l1-l4-l10"),
> + RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo515, "vdd-l1-l4-l10"),
> RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, "vdd-l2-l13-l14"),
> - RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
> - RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l1-l4-l10"),
> + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo515, "vdd-l3"),
> + RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo515, "vdd-l1-l4-l10"),
> RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l16"),
> - RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo_lv, "vdd-l6-l7"),
> - RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo_lv, "vdd-l6-l7"),
> - RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo_lv, "vdd-l8-l9"),
> + RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l6-l7"),
> + RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l6-l7"),
> + RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo, "vdd-l8-l9"),
> RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, "vdd-l8-l9"),
> - RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo, "vdd-l1-l4-l10"),
> - RPMH_VREG("ldo11", "ldo%s11", &pmic5_nldo, "vdd-l11"),
> + RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo515, "vdd-l1-l4-l10"),
> + RPMH_VREG("ldo11", "ldo%s11", &pmic5_nldo515, "vdd-l11"),
> RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo, "vdd-l12"),
> RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l2-l13-l14"),
> RPMH_VREG("ldo14", "ldo%s14", &pmic5_pldo, "vdd-l2-l13-l14"),
> - RPMH_VREG("ldo15", "ldo%s15", &pmic5_pldo, "vdd-l15"),
> + RPMH_VREG("ldo15", "ldo%s15", &pmic5_nldo515, "vdd-l15"),
> RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l5-l16"),
> RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo, "vdd-l17"),
> RPMH_VREG("bob1", "bob%s1", &pmic5_bob, "vdd-bob1"),
> @@ -1086,9 +1086,9 @@ static const struct rpmh_vreg_init_data pm8550vs_vreg_data[] = {
> RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps525_lv, "vdd-s4"),
> RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps525_lv, "vdd-s5"),
> RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps525_mv, "vdd-s6"),
> - RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"),
> - RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2"),
> - RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
> + RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo515, "vdd-l1"),
> + RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo515, "vdd-l2"),
> + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo515, "vdd-l3"),
> {}
> };
>
> @@ -1101,9 +1101,9 @@ static const struct rpmh_vreg_init_data pm8550ve_vreg_data[] = {
> RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps525_lv, "vdd-s6"),
> RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps525_lv, "vdd-s7"),
> RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps525_lv, "vdd-s8"),
> - RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"),
> - RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2"),
> - RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
> + RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo515, "vdd-l1"),
> + RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo515, "vdd-l2"),
> + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo515, "vdd-l3"),
> {}
> };
>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] regulator: qcom-rpmh: Fix regulators for PM8550
2023-06-05 11:56 [PATCH] regulator: qcom-rpmh: Fix regulators for PM8550 Abel Vesa
2023-06-05 13:45 ` Rajendra Nayak
@ 2023-06-07 17:23 ` Mark Brown
1 sibling, 0 replies; 3+ messages in thread
From: Mark Brown @ 2023-06-07 17:23 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Liam Girdwood, Abel Vesa
Cc: linux-arm-msm, Linux Kernel Mailing List
On Mon, 05 Jun 2023 14:56:07 +0300, Abel Vesa wrote:
> The PM8550 uses only NLDOs 515 and the LDO 6 through 8 are low voltage
> type, so fix accordingly.
>
>
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[1/1] regulator: qcom-rpmh: Fix regulators for PM8550
commit: b00de0000a69579f4d730077fe3ea8ca31404255
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-06-07 17:24 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-06-05 11:56 [PATCH] regulator: qcom-rpmh: Fix regulators for PM8550 Abel Vesa
2023-06-05 13:45 ` Rajendra Nayak
2023-06-07 17:23 ` Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®