From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Luo Jie <quic_luoj@quicinc.com>,
agross@kernel.org, andersson@kernel.org,
konrad.dybcio@linaro.org, davem@davemloft.net,
edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org, andrew@lunn.ch, hkallweit1@gmail.com,
linux@armlinux.org.uk, robert.marko@sartura.hr
Cc: linux-arm-msm@vger.kernel.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
quic_srichara@quicinc.com
Subject: Re: [PATCH 9/9] dt-bindings: net: ipq4019-mdio: Document ipq5332 platform
Date: Thu, 16 Nov 2023 12:56:19 +0100 [thread overview]
Message-ID: <834cbb58-3a88-4ba6-8db6-10440a4d0893@linaro.org> (raw)
In-Reply-To: <20231115032515.4249-10-quic_luoj@quicinc.com>
On 15/11/2023 04:25, Luo Jie wrote:
> On platform IPQ5332, the MDIO address of qca8084 can be programed
> when the device tree property "fixup" defined, the clock sequence
> needs to be completed before the PHY probeable.
>
> Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
> ---
> .../bindings/net/qcom,ipq4019-mdio.yaml | 138 +++++++++++++++++-
> 1 file changed, 130 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
> index 3407e909e8a7..7ff92be14ee1 100644
> --- a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
> +++ b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
> @@ -15,11 +15,13 @@ properties:
> - enum:
> - qcom,ipq4019-mdio
> - qcom,ipq5018-mdio
> + - qcom,ipq5332-mdio
>
> - items:
> - enum:
> - qcom,ipq6018-mdio
> - qcom,ipq8074-mdio
> + - qcom,ipq9574-mdio
> - const: qcom,ipq4019-mdio
>
> "#address-cells":
> @@ -30,19 +32,47 @@ properties:
>
> reg:
> minItems: 1
> - maxItems: 2
> + maxItems: 5
> description:
> - the first Address and length of the register set for the MDIO controller.
> - the second Address and length of the register for ethernet LDO, this second
> - address range is only required by the platform IPQ50xx.
> + the first Address and length of the register set for the MDIO controller,
> + the optional second, third and fourth address and length of the register
> + for ethernet LDO, these three address range are required by the platform
> + IPQ50xx/IPQ5332, the last address and length is for the CMN clock to
> + select the reference clock.
> +
> + reg-names:
> + minItems: 1
> + maxItems: 5
You must describe the items and constrain them per each variant.
>
> clocks:
> - items:
> - - description: MDIO clock source frequency fixed to 100MHZ
> + minItems: 1
> + maxItems: 5
> + description:
Doesn't this make all other variants with incorrect constraints?
> + MDIO system clock frequency fixed to 100MHZ, and the GCC uniphy
> + clocks enabled for resetting ethernet PHY.
>
> clock-names:
> - items:
> - - const: gcc_mdio_ahb_clk
> + minItems: 1
> + maxItems: 5
> +
> + phy-reset-gpio:
No, for multiple reasons. It's gpios first of all. Where do you see such
property? Where is the existing definition?
Then it is "reset-gpios" if this is MDIO. Why do you put phy properties
in MDIO?
> + minItems: 1
> + maxItems: 3
> + description:
> + GPIO used to reset the PHY, each GPIO is for resetting the connected
> + ethernet PHY device.
> +
> + phyaddr-fixup:
> + description: Register address for programing MDIO address of PHY devices
You did not test code which you sent.
> +
> + pcsaddr-fixup:
> + description: Register address for programing MDIO address of PCS devices
> +
> + mdio-clk-fixup:
> + description: The initialization clocks to be configured
> +
> + fixup:
> + description: The MDIO address of PHY/PCS device to be programed
Please do not send untested code.
...
> +
> + qca8kphy2: ethernet-phy@3 {
> + reg = <3>;
> + fixup;
> + };
> +
> + qca8kphy3: ethernet-phy@4 {
> + reg = <4>;
> + fixup;
> + };
> +
> + qca8kpcs0: pcsphy0@5 {
> + compatible = "qcom,qca8k_pcs";
> + reg = <5>;
> + fixup;
> + };
Fix indentation.
Best regards,
Krzysztof
next prev parent reply other threads:[~2023-11-16 11:56 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-15 3:25 [PATCH 0/9] add MDIO changes on " Luo Jie
2023-11-15 3:25 ` [PATCH 1/9] net: mdio: ipq4019: increase eth_ldo_rdy for " Luo Jie
2023-11-15 13:44 ` Andrew Lunn
2023-11-16 9:35 ` Jie Luo
2023-11-16 11:57 ` Krzysztof Kozlowski
2023-11-17 9:56 ` Jie Luo
2023-11-15 3:25 ` [PATCH 2/9] net: mdio: ipq4019: Enable the clocks " Luo Jie
2023-11-20 14:22 ` Konrad Dybcio
2023-11-21 10:28 ` Jie Luo
2023-11-21 14:04 ` Andrew Lunn
2023-11-23 11:02 ` Jie Luo
2023-11-27 9:37 ` Simon Horman
2023-11-28 7:07 ` Jie Luo
2023-11-15 3:25 ` [PATCH 3/9] net: mdio: ipq4019: Enable GPIO reset " Luo Jie
2023-11-15 15:11 ` Andrew Lunn
2023-11-16 11:13 ` Jie Luo
2023-11-16 11:19 ` Robert Marko
2023-11-16 11:29 ` Jie Luo
2023-11-16 17:20 ` Andrew Lunn
2023-11-17 9:59 ` Jie Luo
2023-12-04 8:53 ` Jie Luo
2023-11-15 3:25 ` [PATCH 4/9] net: mdio: ipq4019: configure CMN PLL clock for ipq5332 Luo Jie
2023-11-15 15:19 ` Andrew Lunn
2023-11-16 10:48 ` Jie Luo
2023-11-22 20:24 ` Konrad Dybcio
2023-11-15 3:25 ` [PATCH 5/9] net: mdio: ipq4019: support MDIO clock frequency divider Luo Jie
2023-11-15 15:22 ` Andrew Lunn
2023-11-16 10:47 ` Jie Luo
2023-11-15 3:25 ` [PATCH 6/9] net: mdio: ipq4019: Support qca8084 switch register access Luo Jie
2023-11-15 3:25 ` [PATCH 7/9] net: mdio: ipq4019: program phy address when "fixup" defined Luo Jie
2023-11-15 16:17 ` Andrew Lunn
2023-11-16 11:17 ` Jie Luo
2023-11-15 3:25 ` [PATCH 8/9] net: mdio: ipq4019: add qca8084 configurations Luo Jie
2023-11-15 16:20 ` Andrew Lunn
2023-11-15 17:01 ` Konrad Dybcio
2023-11-15 17:03 ` Robert Marko
2023-11-16 10:45 ` Jie Luo
2023-11-16 17:08 ` Andrew Lunn
2023-11-17 10:05 ` Jie Luo
2023-11-16 10:44 ` Jie Luo
2023-11-16 10:47 ` Jie Luo
2023-11-16 17:12 ` Andrew Lunn
2023-11-17 10:15 ` Jie Luo
2023-11-15 3:25 ` [PATCH 9/9] dt-bindings: net: ipq4019-mdio: Document ipq5332 platform Luo Jie
2023-11-15 4:20 ` Rob Herring
2023-11-15 14:35 ` Andrew Lunn
2023-11-16 11:22 ` Jie Luo
2023-11-16 11:56 ` Krzysztof Kozlowski [this message]
2023-11-17 10:36 ` Jie Luo
2023-11-17 10:40 ` Krzysztof Kozlowski
2023-11-17 11:20 ` Jie Luo
2023-11-17 12:43 ` Krzysztof Kozlowski
2023-11-18 8:07 ` Jie Luo
2023-11-18 15:36 ` Andrew Lunn
2023-11-20 9:00 ` Jie Luo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=834cbb58-3a88-4ba6-8db6-10440a4d0893@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=andrew@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=quic_luoj@quicinc.com \
--cc=quic_srichara@quicinc.com \
--cc=robert.marko@sartura.hr \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®