[PATCH v4 0/4] Add DT Support for USB on Shikra

[PATCH v4 0/4] Add DT Support for USB on Shikra

[Krishna Kurapati]

Shikra has two USB controllers. Adding both USB controllers support
in device mode in this series.

Changes in v4:
- Enable both controllers in CQS/CQM platform
- Fixed iface clock in usb_2 node
- Skipped adding RB tags obtained from Konrad since on CQM/CQS, second
  controller also is enabled in v4. Also specified dr_mode as peripheral
  for first controller.

Link to v3:
https://lore.kernel.org/all/20260716-shikra-usb-dt-v3-v3-0-13f73a0571bb@oss.qualcomm.com/

Changes in v3:
- USB changes were sent as part of consolidated submission in v2, but
  they were later dropped since bindings had to be updated.
- Remove double vote on USB3_PRIM_CLKREF and also removed xo clock.
- Uses &mpm as interrupt reference (sashiko bot)

Link to v2:
https://lore.kernel.org/all/20260519-shikra-dt-v2-0-c01b90fb4395@oss.qualcomm.com/

Changes in v2:
- Moved to using mpm interrupt handler for ss phy irq (sashiko bot)

Link to v1:
https://lore.kernel.org/all/20260512-shikra-dt-v1-0-716438330dd0@oss.qualcomm.com/

Binding dependencies:
- USB controller: https://lore.kernel.org/all/20260711-usb-shikra-v4-v4-1-9d59b9d9aff7@oss.qualcomm.com/ - (RB'd)
- QUSB2 Phy: https://lore.kernel.org/all/20260712-usb-shikra-phy-v6-v6-1-1b3e51bf1541@oss.qualcomm.com/ - (RB'd)
- QMP Phy: https://lore.kernel.org/all/20260712-usb-shikra-phy-v6-v6-2-1b3e51bf1541@oss.qualcomm.com/ - (RB'd)

Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
Krishna Kurapati (4):
      arm64: dts: qcom: Add support for usb nodes on Shikra
      arm64: dts: qcom: Enable USB controllers on Shikra CQS platform
      arm64: dts: qcom: Enable USB controllers on Shikra CQM platform
      arm64: dts: qcom: Enable USB controllers on Shikra IQS platform

 arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts |  35 +++++
 arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts |  35 +++++
 arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts |  35 +++++
 arch/arm64/boot/dts/qcom/shikra.dtsi        | 221 ++++++++++++++++++++++++++++
 4 files changed, 326 insertions(+)
---
base-commit: 7b3363bc5e08c0a7f64b5a822a9b6e2fbcfcc401
change-id: 20260719-usb-shikra-dt-v4-d2b083472aee

Best regards,
--  
Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>

[PATCH v4 1/4] arm64: dts: qcom: Add support for usb nodes on Shikra

[Krishna Kurapati]

Add support for both USB controllers and their respective phys on Shikra.

Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/shikra.dtsi | 221 +++++++++++++++++++++++++++++++++++
 1 file changed, 221 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
index 4e5bc9e17c8e..7f5d584fc17b 100644
--- a/arch/arm64/boot/dts/qcom/shikra.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interconnect/qcom,rpm-icc.h>
 #include <dt-bindings/interconnect/qcom,shikra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 
 / {
@@ -442,6 +443,85 @@ gcc: clock-controller@1400000 {
 			#power-domain-cells = <1>;
 		};
 
+		usb_1_hsphy: phy@1613000 {
+			compatible = "qcom,shikra-qusb2-phy";
+			reg = <0x0 0x01613000 0x0 0x180>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim_1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy: phy@1617000 {
+			compatible = "qcom,shikra-qusb2-phy";
+			reg = <0x0 0x01617000 0x0 0x180>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim_2>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_qmpphy: phy@1615000 {
+			compatible = "qcom,shikra-qmp-usb3-dp-phy";
+			reg = <0x0 0x01615000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_EN>,
+				 <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+
+			resets = <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>;
+			reset-names = "phy_phy",
+				      "dp_phy",
+				      "phy";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+			orientation-switch;
+
+			qcom,tcsr-reg = <&tcsr_regs 0xb244 0xb248>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+			};
+		};
+
 		system_noc: interconnect@1880000 {
 			compatible = "qcom,shikra-sys-noc";
 			reg = <0x0 0x01880000 0x0 0x6a080>;
@@ -493,6 +573,11 @@ qusb2_hstx_trim_1: hstx-trim@25b {
 				bits = <1 4>;
 			};
 
+			qusb2_hstx_trim_2: hstx-trim@25a {
+				reg = <0x25a 0x1>;
+				bits = <4 4>;
+			};
+
 			gpu_speed_bin: gpu-speed-bin@2006 {
 				reg = <0x2006 0x2>;
 				bits = <5 8>;
@@ -640,6 +725,142 @@ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 			};
 		};
 
+		usb_2: usb@4c00000 {
+			compatible = "qcom,shikra-dwc3", "qcom,snps-dwc3";
+			reg = <0x0 0x04c00000 0x0 0xfc100>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB20_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB2_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB20_SLEEP_CLK>,
+				 <&gcc GCC_USB20_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB20_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <133333333>;
+
+			interrupts-extended = <&intc GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&intc GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&intc GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&mpm 59 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 58 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq";
+
+			iommus = <&apps_smmu 0x140 0x0>;
+
+			maximum-speed = "high-speed";
+
+			phys = <&usb_2_hsphy>;
+			phy-names = "usb2-phy";
+
+			power-domains = <&gcc GCC_USB20_GDSC>;
+
+			qcom,select-utmi-as-pipe-clk;
+			resets = <&gcc GCC_USB20_BCR>;
+
+			snps,dis_u2_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,has-lpm-erratum;
+			snps,hird-threshold = /bits/ 8 <0x10>;
+
+			usb-role-switch;
+			wakeup-source;
+
+			status = "disabled";
+
+			port {
+				usb_2_dwc3_hs: endpoint {
+				};
+			};
+		};
+
+		usb_1: usb@4e00000 {
+			compatible = "qcom,shikra-dwc3", "qcom,snps-dwc3";
+			reg = <0x0 0x04e00000 0x0 0xfc100>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <133333333>;
+
+			interrupts-extended = <&intc GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&intc GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&mpm 91 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 90 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			iommus = <&apps_smmu 0x120 0x0>;
+
+			phys = <&usb_1_hsphy>, <&usb_qmpphy QMP_USB43DP_USB3_PHY>;
+			phy-names = "usb2-phy", "usb3-phy";
+
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_u3_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,has-lpm-erratum;
+			snps,hird-threshold = /bits/ 8 <0x10>;
+			snps,usb3_lpm_capable;
+			snps,parkmode-disable-ss-quirk;
+
+			usb-role-switch;
+
+			wakeup-source;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_dwc3_hs: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_dwc3_ss: endpoint {
+						remote-endpoint = <&usb_qmpphy_usb_ss_in>;
+					};
+				};
+			};
+		};
+
 		sram@c11e000 {
 			compatible = "qcom,shikra-imem", "mmio-sram";
 			reg = <0x0 0x0c11e000 0x0 0x1000>;

-- 
2.34.1

Re: [PATCH v4 1/4] arm64: dts: qcom: Add support for usb nodes on Shikra

[Dmitry Baryshkov]

On Tue, Jul 21, 2026 at 03:23:45PM +0530, Krishna Kurapati wrote:
> Add support for both USB controllers and their respective phys on Shikra.
> 
> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/shikra.dtsi | 221 +++++++++++++++++++++++++++++++++++
>  1 file changed, 221 insertions(+)
> 
> +
> +		usb_qmpphy: phy@1615000 {

Should be before usb_2_hsphy: phy@1617000.

> +			compatible = "qcom,shikra-qmp-usb3-dp-phy";
> +			reg = <0x0 0x01615000 0x0 0x2000>;
> +
> @@ -493,6 +573,11 @@ qusb2_hstx_trim_1: hstx-trim@25b {
>  				bits = <1 4>;
>  			};
>  
> +			qusb2_hstx_trim_2: hstx-trim@25a {

Before 25b

> +				reg = <0x25a 0x1>;
> +				bits = <4 4>;
> +			};
> +
>  			gpu_speed_bin: gpu-speed-bin@2006 {
>  				reg = <0x2006 0x2>;
>  				bits = <5 8>;
> @@ -640,6 +725,142 @@ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
>  			};
>  		};
>  
> +		usb_2: usb@4c00000 {
> +			compatible = "qcom,shikra-dwc3", "qcom,snps-dwc3";
> +			reg = <0x0 0x04c00000 0x0 0xfc100>;

Here and in usb_1, missing interconnects.

> +

-- 
With best wishes
Dmitry

[PATCH v4 2/4] arm64: dts: qcom: Enable USB controllers on Shikra CQS platform

[Krishna Kurapati]

Enable both USB controllers in device mode on Shikra CQS platform.

Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 35 +++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
index b3f19a64d7ae..006e24a62f5c 100644
--- a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
@@ -38,3 +38,38 @@ &sdhc_1 {
 
 	status = "okay";
 };
+
+&usb_1 {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&pm4125_l12>;
+	vdda-pll-supply = <&pm4125_l13>;
+	vdda-phy-dpdm-supply = <&pm4125_l21>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&pm4125_l8>;
+	vdda-pll-supply = <&pm4125_l13>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&pm4125_l12>;
+	vdda-pll-supply = <&pm4125_l13>;
+	vdda-phy-dpdm-supply = <&pm4125_l21>;
+
+	status = "okay";
+};

-- 
2.34.1

Re: [PATCH v4 2/4] arm64: dts: qcom: Enable USB controllers on Shikra CQS platform

[Dmitry Baryshkov]

On Tue, Jul 21, 2026 at 03:23:46PM +0530, Krishna Kurapati wrote:
> Enable both USB controllers in device mode on Shikra CQS platform.
> 
> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 35 +++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
> index b3f19a64d7ae..006e24a62f5c 100644
> --- a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
> +++ b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
> @@ -38,3 +38,38 @@ &sdhc_1 {
>  
>  	status = "okay";
>  };
> +
> +&usb_1 {
> +	dr_mode = "peripheral";

Why is peripheral-only?

> +
> +	status = "okay";
> +};
> +

-- 
With best wishes
Dmitry

Re: [PATCH v4 2/4] arm64: dts: qcom: Enable USB controllers on Shikra CQS platform

[Krishna Kurapati]

On 7/22/2026 3:07 AM, Dmitry Baryshkov wrote:
> On Tue, Jul 21, 2026 at 03:23:46PM +0530, Krishna Kurapati wrote:
>> Enable both USB controllers in device mode on Shikra CQS platform.
>>
>> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
>> ---
>>   arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 35 +++++++++++++++++++++++++++++
>>   1 file changed, 35 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
>> index b3f19a64d7ae..006e24a62f5c 100644
>> --- a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
>> +++ b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
>> @@ -38,3 +38,38 @@ &sdhc_1 {
>>   
>>   	status = "okay";
>>   };
>> +
>> +&usb_1 {
>> +	dr_mode = "peripheral";
> 
> Why is peripheral-only?
> 

On First controller of CQS/CQM platforms, usb-role-swtich is controller 
by PM4125 and on second controller of CQS/CQM platforms, and both 
controllers of IQS, its controller by Cypress PD controller. I will push 
out the PM4125 changes in a different patch set since couple of issues 
are under debug. And the cypress pd controller changes are still under 
development. Hence enabled both controllers in device mode for now.

>> +
>> +	status = "okay";
>> +};
>> +
> 

Re: [PATCH v4 2/4] arm64: dts: qcom: Enable USB controllers on Shikra CQS platform

[Dmitry Baryshkov]

On Wed, Jul 22, 2026 at 07:22:47AM +0530, Krishna Kurapati wrote:
> 
> 
> On 7/22/2026 3:07 AM, Dmitry Baryshkov wrote:
> > On Tue, Jul 21, 2026 at 03:23:46PM +0530, Krishna Kurapati wrote:
> > > Enable both USB controllers in device mode on Shikra CQS platform.
> > > 
> > > Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
> > > ---
> > >   arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 35 +++++++++++++++++++++++++++++
> > >   1 file changed, 35 insertions(+)
> > > 
> > > diff --git a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
> > > index b3f19a64d7ae..006e24a62f5c 100644
> > > --- a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
> > > +++ b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
> > > @@ -38,3 +38,38 @@ &sdhc_1 {
> > >   	status = "okay";
> > >   };
> > > +
> > > +&usb_1 {
> > > +	dr_mode = "peripheral";
> > 
> > Why is peripheral-only?
> > 
> 
> On First controller of CQS/CQM platforms, usb-role-swtich is controller by
> PM4125 and on second controller of CQS/CQM platforms, and both controllers
> of IQS, its controller by Cypress PD controller. I will push out the PM4125
> changes in a different patch set since couple of issues are under debug. And
> the cypress pd controller changes are still under development. Hence enabled
> both controllers in device mode for now.

That needs to be explained in the commit messages.

> 
> > > +
> > > +	status = "okay";
> > > +};
> > > +
> > 
> 

-- 
With best wishes
Dmitry

Re: [PATCH v4 2/4] arm64: dts: qcom: Enable USB controllers on Shikra CQS platform

[Krishna Kurapati]

On 7/22/2026 11:03 AM, Dmitry Baryshkov wrote:
> On Wed, Jul 22, 2026 at 07:22:47AM +0530, Krishna Kurapati wrote:
>>
>>
>> On 7/22/2026 3:07 AM, Dmitry Baryshkov wrote:
>>> On Tue, Jul 21, 2026 at 03:23:46PM +0530, Krishna Kurapati wrote:
>>>> Enable both USB controllers in device mode on Shikra CQS platform.
>>>>
>>>> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
>>>> ---
>>>>    arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 35 +++++++++++++++++++++++++++++
>>>>    1 file changed, 35 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
>>>> index b3f19a64d7ae..006e24a62f5c 100644
>>>> --- a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
>>>> +++ b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
>>>> @@ -38,3 +38,38 @@ &sdhc_1 {
>>>>    	status = "okay";
>>>>    };
>>>> +
>>>> +&usb_1 {
>>>> +	dr_mode = "peripheral";
>>>
>>> Why is peripheral-only?
>>>
>>
>> On First controller of CQS/CQM platforms, usb-role-swtich is controller by
>> PM4125 and on second controller of CQS/CQM platforms, and both controllers
>> of IQS, its controller by Cypress PD controller. I will push out the PM4125
>> changes in a different patch set since couple of issues are under debug. And
>> the cypress pd controller changes are still under development. Hence enabled
>> both controllers in device mode for now.
> 
> That needs to be explained in the commit messages.
> 

Since putting in commit message that there is a PD controller or the 
PM4125 will take care of OTG would be out of context, in cover letter 
can i mention that the above information, and state that future patches 
will enable OTG.

Regards,
Krishna,

Re: [PATCH v4 2/4] arm64: dts: qcom: Enable USB controllers on Shikra CQS platform

[Dmitry Baryshkov]

On Wed, Jul 22, 2026 at 12:33:55PM +0530, Krishna Kurapati wrote:
> 
> 
> On 7/22/2026 11:03 AM, Dmitry Baryshkov wrote:
> > On Wed, Jul 22, 2026 at 07:22:47AM +0530, Krishna Kurapati wrote:
> > > 
> > > 
> > > On 7/22/2026 3:07 AM, Dmitry Baryshkov wrote:
> > > > On Tue, Jul 21, 2026 at 03:23:46PM +0530, Krishna Kurapati wrote:
> > > > > Enable both USB controllers in device mode on Shikra CQS platform.
> > > > > 
> > > > > Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
> > > > > ---
> > > > >    arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 35 +++++++++++++++++++++++++++++
> > > > >    1 file changed, 35 insertions(+)
> > > > > 
> > > > > diff --git a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
> > > > > index b3f19a64d7ae..006e24a62f5c 100644
> > > > > --- a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
> > > > > +++ b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
> > > > > @@ -38,3 +38,38 @@ &sdhc_1 {
> > > > >    	status = "okay";
> > > > >    };
> > > > > +
> > > > > +&usb_1 {
> > > > > +	dr_mode = "peripheral";
> > > > 
> > > > Why is peripheral-only?
> > > > 
> > > 
> > > On First controller of CQS/CQM platforms, usb-role-swtich is controller by
> > > PM4125 and on second controller of CQS/CQM platforms, and both controllers
> > > of IQS, its controller by Cypress PD controller. I will push out the PM4125
> > > changes in a different patch set since couple of issues are under debug. And
> > > the cypress pd controller changes are still under development. Hence enabled
> > > both controllers in device mode for now.
> > 
> > That needs to be explained in the commit messages.
> > 
> 
> Since putting in commit message that there is a PD controller or the PM4125

There is no PD controller on PM4125

> will take care of OTG would be out of context, in cover letter can i mention
> that the above information, and state that future patches will enable OTG.

Cover letter doesn't get recorded in the Git history. No.

-- 
With best wishes
Dmitry

[PATCH v4 3/4] arm64: dts: qcom: Enable USB controllers on Shikra CQM platform

[Krishna Kurapati]

Enable both USB controllers in device mode on Shikra CQM platform.

Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts | 35 +++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
index 0a52ab9b7a4c..e58b40389ad3 100644
--- a/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
@@ -38,3 +38,38 @@ &sdhc_1 {
 
 	status = "okay";
 };
+
+&usb_1 {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&pm4125_l12>;
+	vdda-pll-supply = <&pm4125_l13>;
+	vdda-phy-dpdm-supply = <&pm4125_l21>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&pm4125_l8>;
+	vdda-pll-supply = <&pm4125_l13>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&pm4125_l12>;
+	vdda-pll-supply = <&pm4125_l13>;
+	vdda-phy-dpdm-supply = <&pm4125_l21>;
+
+	status = "okay";
+};

-- 
2.34.1

Re: [PATCH v4 3/4] arm64: dts: qcom: Enable USB controllers on Shikra CQM platform

[Dmitry Baryshkov]

On Tue, Jul 21, 2026 at 03:23:47PM +0530, Krishna Kurapati wrote:
> Enable both USB controllers in device mode on Shikra CQM platform.
> 
> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts | 35 +++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
> index 0a52ab9b7a4c..e58b40389ad3 100644
> --- a/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
> +++ b/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
> @@ -38,3 +38,38 @@ &sdhc_1 {
>  
>  	status = "okay";
>  };
> +
> +&usb_1 {
> +	dr_mode = "peripheral";

Why?

> +
> +	status = "okay";
> +};
> +

-- 
With best wishes
Dmitry

[PATCH v4 4/4] arm64: dts: qcom: Enable USB controllers on Shikra IQS platform

[Krishna Kurapati]

Enable both usb controllers in device mode on Shikra IQS platform.

Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts | 35 +++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
index 3003a47bd759..2d4e34ec3b82 100644
--- a/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
@@ -38,3 +38,38 @@ &sdhc_1 {
 
 	status = "okay";
 };
+
+&usb_1 {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&pm8150_l4>;
+	vdda-pll-supply = <&pm8150_l12>;
+	vdda-phy-dpdm-supply = <&pm8150_l13>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&pm8150_l6>;
+	vdda-pll-supply = <&pm8150_l12>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&pm8150_l4>;
+	vdda-pll-supply = <&pm8150_l12>;
+	vdda-phy-dpdm-supply = <&pm8150_l13>;
+
+	status = "okay";
+};

-- 
2.34.1

Re: [PATCH v4 4/4] arm64: dts: qcom: Enable USB controllers on Shikra IQS platform

[Dmitry Baryshkov]

On Tue, Jul 21, 2026 at 03:23:48PM +0530, Krishna Kurapati wrote:
> Enable both usb controllers in device mode on Shikra IQS platform.
> 
> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts | 35 +++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
> index 3003a47bd759..2d4e34ec3b82 100644
> --- a/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
> +++ b/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
> @@ -38,3 +38,38 @@ &sdhc_1 {
>  
>  	status = "okay";
>  };
> +
> +&usb_1 {
> +	dr_mode = "peripheral";

Why?

> +
> +	status = "okay";
> +};
> +

-- 
With best wishes
Dmitry