mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Moger, Babu" <bmoger@amd.com>
To: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>,
	Fenghua Yu <fenghua.yu@intel.com>,
	Reinette Chatre <reinette.chatre@intel.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	x86@kernel.org, "H. Peter Anvin" <hpa@zytor.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/4] x86/resctrl: Enable non-contiguous bits in Intel CAT
Date: Wed, 27 Sep 2023 17:34:27 -0500	[thread overview]
Message-ID: <9751cbaf-8653-d32a-6058-13c251c59b3d@amd.com> (raw)
In-Reply-To: <918e147601697b1d4b8f8589f5751e05d6ceccdf.1695371055.git.maciej.wieczor-retman@intel.com>

Hi Maciej,

How about this subject line?

x86/resctrl: Enable non-contiguous CBMs on Intel CAT

On 9/22/2023 3:48 AM, Maciej Wieczor-Retman wrote:
> The setting for non-contiguous 1s support in Intel CAT is

> hardcoded to false. On these systems, writing non-contiguous
> 1s into the schemata file will fail before resctrl passes
> the value to the hardware.
>
> In Intel CAT CPUID.0x10.1:ECX[3] and CPUID.0x10.2:ECX[3] stopped
> being reserved and now carry information about non-contiguous 1s
> value support for L3 and L2 cache respectively. The CAT
> capacity bitmask (CBM) supports a non-contiguous 1s value if
> the bit is set.
>
> Replace the hardcoded non-contiguous support value with
> the support learned from the hardware. Add hardcoded non-contiguous
> support value to Haswell probe since it can't make use of CPUID for
> Cache allocation.
>
> Originally-by: Fenghua Yu <fenghua.yu@intel.com>
> Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
> ---
> Changelog v2:
> - Rewrite part of a comment concerning Haswell. (Reinette)
>
>   arch/x86/kernel/cpu/resctrl/core.c        |  9 ++++++---
>   arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 10 ++++++----
>   arch/x86/kernel/cpu/resctrl/internal.h    |  9 +++++++++
>   3 files changed, 21 insertions(+), 7 deletions(-)
>
> diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
> index 030d3b409768..c783a873147c 100644
> --- a/arch/x86/kernel/cpu/resctrl/core.c
> +++ b/arch/x86/kernel/cpu/resctrl/core.c
> @@ -152,6 +152,7 @@ static inline void cache_alloc_hsw_probe(void)
>   	r->cache.cbm_len = 20;
>   	r->cache.shareable_bits = 0xc0000;
>   	r->cache.min_cbm_bits = 2;
> +	r->cache.arch_has_sparse_bitmaps = false;

Is this change required?

This is always set to false in rdt_init_res_defs_intel().

>   	r->alloc_capable = true;
>   
>   	rdt_alloc_capable = true;
> @@ -267,15 +268,18 @@ static void rdt_get_cache_alloc_cfg(int idx, struct rdt_resource *r)
>   {
>   	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
>   	union cpuid_0x10_1_eax eax;
> +	union cpuid_0x10_x_ecx ecx;
>   	union cpuid_0x10_x_edx edx;
> -	u32 ebx, ecx;
> +	u32 ebx;
>   
> -	cpuid_count(0x00000010, idx, &eax.full, &ebx, &ecx, &edx.full);
> +	cpuid_count(0x00000010, idx, &eax.full, &ebx, &ecx.full, &edx.full);
>   	hw_res->num_closid = edx.split.cos_max + 1;
>   	r->cache.cbm_len = eax.split.cbm_len + 1;
>   	r->default_ctrl = BIT_MASK(eax.split.cbm_len + 1) - 1;
>   	r->cache.shareable_bits = ebx & r->default_ctrl;
>   	r->data_width = (r->cache.cbm_len + 3) / 4;
> +	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
> +		r->cache.arch_has_sparse_bitmaps = ecx.split.noncont;
>   	r->alloc_capable = true;
>   }
>   
> @@ -872,7 +876,6 @@ static __init void rdt_init_res_defs_intel(void)
>   
>   		if (r->rid == RDT_RESOURCE_L3 ||
>   		    r->rid == RDT_RESOURCE_L2) {
> -			r->cache.arch_has_sparse_bitmaps = false;

Why do you have to remove this one here?   This seems like a right place 
to initialize.

Thanks

Babu


>   			r->cache.arch_has_per_cpu_cfg = false;
>   			r->cache.min_cbm_bits = 1;
>   		} else if (r->rid == RDT_RESOURCE_MBA) {
> diff --git a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
> index b44c487727d4..f076f12cf8e8 100644
> --- a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
> +++ b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
> @@ -87,10 +87,12 @@ int parse_bw(struct rdt_parse_data *data, struct resctrl_schema *s,
>   
>   /*
>    * Check whether a cache bit mask is valid.
> - * For Intel the SDM says:
> - *	Please note that all (and only) contiguous '1' combinations
> - *	are allowed (e.g. FFFFH, 0FF0H, 003CH, etc.).
> - * Additionally Haswell requires at least two bits set.
> + * On Intel CPUs, non-contiguous 1s value support is indicated by CPUID:
> + *   - CPUID.0x10.1:ECX[3]: L3 non-contiguous 1s value supported if 1
> + *   - CPUID.0x10.2:ECX[3]: L2 non-contiguous 1s value supported if 1
> + *
> + * Haswell does not support a non-contiguous 1s value and additionally
> + * requires at least two bits set.
>    * AMD allows non-contiguous bitmasks.
>    */
>   static bool cbm_validate(char *buf, u32 *data, struct rdt_resource *r)
> diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
> index 85ceaf9a31ac..c47ef2f13e8e 100644
> --- a/arch/x86/kernel/cpu/resctrl/internal.h
> +++ b/arch/x86/kernel/cpu/resctrl/internal.h
> @@ -492,6 +492,15 @@ union cpuid_0x10_3_eax {
>   	unsigned int full;
>   };
>   
> +/* CPUID.(EAX=10H, ECX=ResID).ECX */
> +union cpuid_0x10_x_ecx {
> +	struct {
> +		unsigned int reserved:3;
> +		unsigned int noncont:1;
> +	} split;
> +	unsigned int full;
> +};
> +
>   /* CPUID.(EAX=10H, ECX=ResID).EDX */
>   union cpuid_0x10_x_edx {
>   	struct {

  parent reply	other threads:[~2023-09-27 22:34 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-22  8:47 [PATCH v2 0/4] x86/resctrl: Non-contiguous bitmasks " Maciej Wieczor-Retman
2023-09-22  8:48 ` [PATCH v2 1/4] x86/resctrl: Enable non-contiguous bits " Maciej Wieczor-Retman
2023-09-22 14:14   ` Peter Newman
2023-09-27  9:20     ` Maciej Wieczór-Retman
2023-09-27 10:08       ` Peter Newman
2023-09-27 10:44         ` Maciej Wieczór-Retman
2023-09-27 15:03           ` Tony Luck
2023-09-27 22:34   ` Moger, Babu [this message]
2023-09-28  7:06     ` Maciej Wieczór-Retman
2023-09-28 15:08       ` Moger, Babu
2023-09-28 15:53         ` Reinette Chatre
2023-09-28 16:28           ` Moger, Babu
2023-09-22  8:48 ` [PATCH v2 2/4] x86/resctrl: Add sparse_masks file in info Maciej Wieczor-Retman
2023-09-28 20:47   ` Reinette Chatre
2023-09-29  6:22     ` Maciej Wieczór-Retman
2023-09-22  8:48 ` [PATCH v2 3/4] Documentation/x86: Document resctrl's new sparse_masks Maciej Wieczor-Retman
2023-09-27 22:47   ` Moger, Babu
2023-09-27 22:58     ` Reinette Chatre
2023-09-27 23:02       ` Fenghua Yu
2023-09-28 13:59         ` Moger, Babu
2023-09-22  8:48 ` [PATCH v2 4/4] x86/resctrl: Rename arch_has_sparse_bitmaps Maciej Wieczor-Retman
2023-09-28 20:47   ` Reinette Chatre
2023-09-29  6:20     ` Maciej Wieczór-Retman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9751cbaf-8653-d32a-6058-13c251c59b3d@amd.com \
    --to=bmoger@amd.com \
    --cc=babu.moger@amd.com \
    --cc=bp@alien8.de \
    --cc=dave.hansen@linux.intel.com \
    --cc=fenghua.yu@intel.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maciej.wieczor-retman@intel.com \
    --cc=mingo@redhat.com \
    --cc=reinette.chatre@intel.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®