* [PATCH 02/10] ARM: dts: qcom: sdx55: correct rsc unit-address
2023-04-20 7:50 [PATCH 01/10] ARM: dts: qcom: ipq4019: correct syscon unit-address Krzysztof Kozlowski
@ 2023-04-20 7:50 ` Krzysztof Kozlowski
2023-04-20 10:45 ` Konrad Dybcio
2023-04-20 7:50 ` [PATCH 03/10] ARM: dts: qcom: msm8974: correct pronto unit-address Krzysztof Kozlowski
` (9 subsequent siblings)
10 siblings, 1 reply; 21+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-20 7:50 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc/rsc@17840000: simple-bus unit address format error, expected "17830000"
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/qcom-sdx55.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 72d82a9a6cc5..06c2646dd673 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -792,7 +792,7 @@ frame@17829000 {
};
};
- apps_rsc: rsc@17840000 {
+ apps_rsc: rsc@17830000 {
compatible = "qcom,rpmh-rsc";
reg = <0x17830000 0x10000>, <0x17840000 0x10000>;
reg-names = "drv-0", "drv-1";
--
2.34.1
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH 02/10] ARM: dts: qcom: sdx55: correct rsc unit-address
2023-04-20 7:50 ` [PATCH 02/10] ARM: dts: qcom: sdx55: correct rsc unit-address Krzysztof Kozlowski
@ 2023-04-20 10:45 ` Konrad Dybcio
0 siblings, 0 replies; 21+ messages in thread
From: Konrad Dybcio @ 2023-04-20 10:45 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 20.04.2023 09:50, Krzysztof Kozlowski wrote:
> Match unit-address to reg entry to fix dtbs W=1 warnings:
>
> Warning (simple_bus_reg): /soc/rsc@17840000: simple-bus unit address format error, expected "17830000"
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm/boot/dts/qcom-sdx55.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
> index 72d82a9a6cc5..06c2646dd673 100644
> --- a/arch/arm/boot/dts/qcom-sdx55.dtsi
> +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
> @@ -792,7 +792,7 @@ frame@17829000 {
> };
> };
>
> - apps_rsc: rsc@17840000 {
> + apps_rsc: rsc@17830000 {
> compatible = "qcom,rpmh-rsc";
> reg = <0x17830000 0x10000>, <0x17840000 0x10000>;
> reg-names = "drv-0", "drv-1";
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 03/10] ARM: dts: qcom: msm8974: correct pronto unit-address
2023-04-20 7:50 [PATCH 01/10] ARM: dts: qcom: ipq4019: correct syscon unit-address Krzysztof Kozlowski
2023-04-20 7:50 ` [PATCH 02/10] ARM: dts: qcom: sdx55: correct rsc unit-address Krzysztof Kozlowski
@ 2023-04-20 7:50 ` Krzysztof Kozlowski
2023-04-20 10:46 ` Konrad Dybcio
2023-04-20 7:50 ` [PATCH 04/10] ARM: dts: qcom: ipq8064: drop leading 0 from unit-address Krzysztof Kozlowski
` (8 subsequent siblings)
10 siblings, 1 reply; 21+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-20 7:50 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc/remoteproc@fb21b000: simple-bus unit address format error, expected "fb204000"
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 788d9540fab8..939449a0c695 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -707,7 +707,7 @@ rng@f9bff000 {
clock-names = "core";
};
- pronto: remoteproc@fb21b000 {
+ pronto: remoteproc@fb204000 {
compatible = "qcom,pronto-v2-pil", "qcom,pronto";
reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
reg-names = "ccu", "dxe", "pmu";
--
2.34.1
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH 03/10] ARM: dts: qcom: msm8974: correct pronto unit-address
2023-04-20 7:50 ` [PATCH 03/10] ARM: dts: qcom: msm8974: correct pronto unit-address Krzysztof Kozlowski
@ 2023-04-20 10:46 ` Konrad Dybcio
0 siblings, 0 replies; 21+ messages in thread
From: Konrad Dybcio @ 2023-04-20 10:46 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 20.04.2023 09:50, Krzysztof Kozlowski wrote:
> Match unit-address to reg entry to fix dtbs W=1 warnings:
>
> Warning (simple_bus_reg): /soc/remoteproc@fb21b000: simple-bus unit address format error, expected "fb204000"
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm/boot/dts/qcom-msm8974.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
> index 788d9540fab8..939449a0c695 100644
> --- a/arch/arm/boot/dts/qcom-msm8974.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
> @@ -707,7 +707,7 @@ rng@f9bff000 {
> clock-names = "core";
> };
>
> - pronto: remoteproc@fb21b000 {
> + pronto: remoteproc@fb204000 {
> compatible = "qcom,pronto-v2-pil", "qcom,pronto";
> reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
> reg-names = "ccu", "dxe", "pmu";
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 04/10] ARM: dts: qcom: ipq8064: drop leading 0 from unit-address
2023-04-20 7:50 [PATCH 01/10] ARM: dts: qcom: ipq4019: correct syscon unit-address Krzysztof Kozlowski
2023-04-20 7:50 ` [PATCH 02/10] ARM: dts: qcom: sdx55: correct rsc unit-address Krzysztof Kozlowski
2023-04-20 7:50 ` [PATCH 03/10] ARM: dts: qcom: msm8974: correct pronto unit-address Krzysztof Kozlowski
@ 2023-04-20 7:50 ` Krzysztof Kozlowski
2023-04-20 10:46 ` Konrad Dybcio
2023-04-20 7:50 ` [PATCH 05/10] ARM: dts: qcom: ipq8064: drop invalid GCC thermal-sensor unit-address Krzysztof Kozlowski
` (7 subsequent siblings)
10 siblings, 1 reply; 21+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-20 7:50 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
Unit-address should not start with 0:
Warning (simple_bus_reg): /soc/syscon@03000000: simple-bus unit address format error, expected "3000000"
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 621edf508a88..182018d79a7b 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -609,7 +609,7 @@ saw1: regulator@2099000 {
regulator;
};
- nss_common: syscon@03000000 {
+ nss_common: syscon@3000000 {
compatible = "syscon";
reg = <0x03000000 0x0000FFFF>;
};
--
2.34.1
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH 04/10] ARM: dts: qcom: ipq8064: drop leading 0 from unit-address
2023-04-20 7:50 ` [PATCH 04/10] ARM: dts: qcom: ipq8064: drop leading 0 from unit-address Krzysztof Kozlowski
@ 2023-04-20 10:46 ` Konrad Dybcio
0 siblings, 0 replies; 21+ messages in thread
From: Konrad Dybcio @ 2023-04-20 10:46 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 20.04.2023 09:50, Krzysztof Kozlowski wrote:
> Unit-address should not start with 0:
>
> Warning (simple_bus_reg): /soc/syscon@03000000: simple-bus unit address format error, expected "3000000"
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> arch/arm/boot/dts/qcom-ipq8064.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> index 621edf508a88..182018d79a7b 100644
> --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> @@ -609,7 +609,7 @@ saw1: regulator@2099000 {
> regulator;
> };
>
> - nss_common: syscon@03000000 {
> + nss_common: syscon@3000000 {
> compatible = "syscon";
> reg = <0x03000000 0x0000FFFF>;
some random uppercase hex, if you'd like to clean that up too!
Konrad
> };
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 05/10] ARM: dts: qcom: ipq8064: drop invalid GCC thermal-sensor unit-address
2023-04-20 7:50 [PATCH 01/10] ARM: dts: qcom: ipq4019: correct syscon unit-address Krzysztof Kozlowski
` (2 preceding siblings ...)
2023-04-20 7:50 ` [PATCH 04/10] ARM: dts: qcom: ipq8064: drop leading 0 from unit-address Krzysztof Kozlowski
@ 2023-04-20 7:50 ` Krzysztof Kozlowski
2023-04-20 10:48 ` Konrad Dybcio
2023-04-20 7:50 ` [PATCH 06/10] ARM: dts: qcom: ipq8064: correct LED node names Krzysztof Kozlowski
` (6 subsequent siblings)
10 siblings, 1 reply; 21+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-20 7:50 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
GCC comes with syscon compatible so the thermal-sensor child node should
not have unit-address (bindings also do not expect it):
Warning (unit_address_vs_reg): /soc/clock-controller@900000/thermal-sensor@900000: node has a unit name, but no reg or ranges property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 182018d79a7b..49310520da1c 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -522,7 +522,7 @@ gcc: clock-controller@900000 {
#reset-cells = <1>;
#power-domain-cells = <1>;
- tsens: thermal-sensor@900000 {
+ tsens: thermal-sensor {
compatible = "qcom,ipq8064-tsens";
nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
--
2.34.1
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH 05/10] ARM: dts: qcom: ipq8064: drop invalid GCC thermal-sensor unit-address
2023-04-20 7:50 ` [PATCH 05/10] ARM: dts: qcom: ipq8064: drop invalid GCC thermal-sensor unit-address Krzysztof Kozlowski
@ 2023-04-20 10:48 ` Konrad Dybcio
0 siblings, 0 replies; 21+ messages in thread
From: Konrad Dybcio @ 2023-04-20 10:48 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 20.04.2023 09:50, Krzysztof Kozlowski wrote:
> GCC comes with syscon compatible so the thermal-sensor child node should
> not have unit-address (bindings also do not expect it):
>
> Warning (unit_address_vs_reg): /soc/clock-controller@900000/thermal-sensor@900000: node has a unit name, but no reg or ranges property
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm/boot/dts/qcom-ipq8064.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> index 182018d79a7b..49310520da1c 100644
> --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> @@ -522,7 +522,7 @@ gcc: clock-controller@900000 {
> #reset-cells = <1>;
> #power-domain-cells = <1>;
>
> - tsens: thermal-sensor@900000 {
> + tsens: thermal-sensor {
> compatible = "qcom,ipq8064-tsens";
>
> nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 06/10] ARM: dts: qcom: ipq8064: correct LED node names
2023-04-20 7:50 [PATCH 01/10] ARM: dts: qcom: ipq4019: correct syscon unit-address Krzysztof Kozlowski
` (3 preceding siblings ...)
2023-04-20 7:50 ` [PATCH 05/10] ARM: dts: qcom: ipq8064: drop invalid GCC thermal-sensor unit-address Krzysztof Kozlowski
@ 2023-04-20 7:50 ` Krzysztof Kozlowski
2023-04-20 10:48 ` Konrad Dybcio
2023-04-20 7:50 ` [PATCH 07/10] ARM: dts: qcom: ipq8064: align USB node names with bindings Krzysztof Kozlowski
` (5 subsequent siblings)
10 siblings, 1 reply; 21+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-20 7:50 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
GPIO LEDs is not a bus, so drop unit-address and also start suffix
numbering from 0:
Warning (unit_address_vs_reg): /soc/leds/led@7: node has a unit name, but no reg or ranges property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 2 +-
arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi | 10 +++++-----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index 47a5d1849c72..52eadefd2fb4 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -203,7 +203,7 @@ leds {
pinctrl-0 = <&leds_pins>;
pinctrl-names = "default";
- led@7 {
+ led-0 {
label = "rb3011:green:user";
color = <LED_COLOR_ID_GREEN>;
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
index 411c8d63c38e..c5abe7151f14 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -92,34 +92,34 @@ leds {
pinctrl-0 = <&leds_pins>;
pinctrl-names = "default";
- led@7 {
+ led-0 {
label = "led_usb1";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "usbdev";
default-state = "off";
};
- led@8 {
+ led-1 {
label = "led_usb3";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "usbdev";
default-state = "off";
};
- led@9 {
+ led-2 {
label = "status_led_fail";
function = LED_FUNCTION_STATUS;
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@26 {
+ led-3 {
label = "sata_led";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@53 {
+ led-4 {
label = "status_led_pass";
function = LED_FUNCTION_STATUS;
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
--
2.34.1
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH 06/10] ARM: dts: qcom: ipq8064: correct LED node names
2023-04-20 7:50 ` [PATCH 06/10] ARM: dts: qcom: ipq8064: correct LED node names Krzysztof Kozlowski
@ 2023-04-20 10:48 ` Konrad Dybcio
0 siblings, 0 replies; 21+ messages in thread
From: Konrad Dybcio @ 2023-04-20 10:48 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 20.04.2023 09:50, Krzysztof Kozlowski wrote:
> GPIO LEDs is not a bus, so drop unit-address and also start suffix
> numbering from 0:
>
> Warning (unit_address_vs_reg): /soc/leds/led@7: node has a unit name, but no reg or ranges property
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 2 +-
> arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi | 10 +++++-----
> 2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
> index 47a5d1849c72..52eadefd2fb4 100644
> --- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
> +++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
> @@ -203,7 +203,7 @@ leds {
> pinctrl-0 = <&leds_pins>;
> pinctrl-names = "default";
>
> - led@7 {
> + led-0 {
> label = "rb3011:green:user";
> color = <LED_COLOR_ID_GREEN>;
> gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
> index 411c8d63c38e..c5abe7151f14 100644
> --- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
> @@ -92,34 +92,34 @@ leds {
> pinctrl-0 = <&leds_pins>;
> pinctrl-names = "default";
>
> - led@7 {
> + led-0 {
> label = "led_usb1";
> gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "usbdev";
> default-state = "off";
> };
>
> - led@8 {
> + led-1 {
> label = "led_usb3";
> gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "usbdev";
> default-state = "off";
> };
>
> - led@9 {
> + led-2 {
> label = "status_led_fail";
> function = LED_FUNCTION_STATUS;
> gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
>
> - led@26 {
> + led-3 {
> label = "sata_led";
> gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
>
> - led@53 {
> + led-4 {
> label = "status_led_pass";
> function = LED_FUNCTION_STATUS;
> gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 07/10] ARM: dts: qcom: ipq8064: align USB node names with bindings
2023-04-20 7:50 [PATCH 01/10] ARM: dts: qcom: ipq4019: correct syscon unit-address Krzysztof Kozlowski
` (4 preceding siblings ...)
2023-04-20 7:50 ` [PATCH 06/10] ARM: dts: qcom: ipq8064: correct LED node names Krzysztof Kozlowski
@ 2023-04-20 7:50 ` Krzysztof Kozlowski
2023-04-20 10:48 ` Konrad Dybcio
2023-04-20 7:50 ` [PATCH 08/10] ARM: dts: qcom: apq8060-dragonboard: move regulators out of simple-bus Krzysztof Kozlowski
` (4 subsequent siblings)
10 siblings, 1 reply; 21+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-20 7:50 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
Bindings expect USB controller node names to be named "usb".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 49310520da1c..396938ec46cb 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -614,7 +614,7 @@ nss_common: syscon@3000000 {
reg = <0x03000000 0x0000FFFF>;
};
- usb3_0: usb3@100f8800 {
+ usb3_0: usb@100f8800 {
compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
#address-cells = <1>;
#size-cells = <1>;
@@ -629,7 +629,7 @@ usb3_0: usb3@100f8800 {
status = "disabled";
- dwc3_0: dwc3@10000000 {
+ dwc3_0: usb@10000000 {
compatible = "snps,dwc3";
reg = <0x10000000 0xcd00>;
interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
@@ -660,7 +660,7 @@ ss_phy_0: phy@100f8830 {
status = "disabled";
};
- usb3_1: usb3@110f8800 {
+ usb3_1: usb@110f8800 {
compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
#address-cells = <1>;
#size-cells = <1>;
@@ -675,7 +675,7 @@ usb3_1: usb3@110f8800 {
status = "disabled";
- dwc3_1: dwc3@11000000 {
+ dwc3_1: usb@11000000 {
compatible = "snps,dwc3";
reg = <0x11000000 0xcd00>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
--
2.34.1
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH 07/10] ARM: dts: qcom: ipq8064: align USB node names with bindings
2023-04-20 7:50 ` [PATCH 07/10] ARM: dts: qcom: ipq8064: align USB node names with bindings Krzysztof Kozlowski
@ 2023-04-20 10:48 ` Konrad Dybcio
0 siblings, 0 replies; 21+ messages in thread
From: Konrad Dybcio @ 2023-04-20 10:48 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 20.04.2023 09:50, Krzysztof Kozlowski wrote:
> Bindings expect USB controller node names to be named "usb".
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> index 49310520da1c..396938ec46cb 100644
> --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> @@ -614,7 +614,7 @@ nss_common: syscon@3000000 {
> reg = <0x03000000 0x0000FFFF>;
> };
>
> - usb3_0: usb3@100f8800 {
> + usb3_0: usb@100f8800 {
> compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -629,7 +629,7 @@ usb3_0: usb3@100f8800 {
>
> status = "disabled";
>
> - dwc3_0: dwc3@10000000 {
> + dwc3_0: usb@10000000 {
> compatible = "snps,dwc3";
> reg = <0x10000000 0xcd00>;
> interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
> @@ -660,7 +660,7 @@ ss_phy_0: phy@100f8830 {
> status = "disabled";
> };
>
> - usb3_1: usb3@110f8800 {
> + usb3_1: usb@110f8800 {
> compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -675,7 +675,7 @@ usb3_1: usb3@110f8800 {
>
> status = "disabled";
>
> - dwc3_1: dwc3@11000000 {
> + dwc3_1: usb@11000000 {
> compatible = "snps,dwc3";
> reg = <0x11000000 0xcd00>;
> interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 08/10] ARM: dts: qcom: apq8060-dragonboard: move regulators out of simple-bus
2023-04-20 7:50 [PATCH 01/10] ARM: dts: qcom: ipq4019: correct syscon unit-address Krzysztof Kozlowski
` (5 preceding siblings ...)
2023-04-20 7:50 ` [PATCH 07/10] ARM: dts: qcom: ipq8064: align USB node names with bindings Krzysztof Kozlowski
@ 2023-04-20 7:50 ` Krzysztof Kozlowski
2023-04-20 10:49 ` Konrad Dybcio
2023-04-20 7:50 ` [PATCH 09/10] ARM: dts: qcom: msm8960-cdp: move regulator " Krzysztof Kozlowski
` (3 subsequent siblings)
10 siblings, 1 reply; 21+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-20 7:50 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
Regulators is not a bus, so drop incomplete simple-bus usage to fix dtbs
W=1 warnings:
Warning (simple_bus_reg): /regulators/regulator-fixed: missing or empty reg/ranges property
Warning (simple_bus_reg): /regulators/xc622a331mrg: missing or empty reg/ranges property
Warning (simple_bus_reg): /regulators/nds332p: missing or empty reg/ranges property
Warning (simple_bus_reg): /regulators/txb0104rgyr: missing or empty reg/ranges property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../arm/boot/dts/qcom-apq8060-dragonboard.dts | 80 +++++++++----------
1 file changed, 38 insertions(+), 42 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 8e4b61e4d4b1..e830cb2395aa 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -18,50 +18,46 @@ chosen {
stdout-path = "serial0:115200n8";
};
- regulators {
- compatible = "simple-bus";
-
- /* Main power of the board: 3.7V */
- vph: regulator-fixed {
- compatible = "regulator-fixed";
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
- regulator-name = "VPH";
- regulator-type = "voltage";
- regulator-always-on;
- regulator-boot-on;
- };
-
- /* GPIO controlled ethernet power regulator */
- dragon_veth: xc622a331mrg {
- compatible = "regulator-fixed";
- regulator-name = "XC6222A331MR-G";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vph>;
- gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- pinctrl-names = "default";
- pinctrl-0 = <&dragon_veth_gpios>;
- regulator-always-on;
- };
+ /* Main power of the board: 3.7V */
+ vph: regulator-fixed {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-name = "VPH";
+ regulator-type = "voltage";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* GPIO controlled ethernet power regulator */
+ dragon_veth: xc622a331mrg {
+ compatible = "regulator-fixed";
+ regulator-name = "XC6222A331MR-G";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vph>;
+ gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dragon_veth_gpios>;
+ regulator-always-on;
+ };
- /* VDDvario fixed regulator */
- dragon_vario: nds332p {
- compatible = "regulator-fixed";
- regulator-name = "NDS332P";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&pm8058_s3>;
- };
+ /* VDDvario fixed regulator */
+ dragon_vario: nds332p {
+ compatible = "regulator-fixed";
+ regulator-name = "NDS332P";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&pm8058_s3>;
+ };
- /* This is a levelshifter for SDCC5 */
- dragon_vio_txb: txb0104rgyr {
- compatible = "regulator-fixed";
- regulator-name = "Dragon SDCC levelshifter";
- vin-supply = <&pm8058_l14>;
- regulator-always-on;
- };
+ /* This is a levelshifter for SDCC5 */
+ dragon_vio_txb: txb0104rgyr {
+ compatible = "regulator-fixed";
+ regulator-name = "Dragon SDCC levelshifter";
+ vin-supply = <&pm8058_l14>;
+ regulator-always-on;
};
/*
--
2.34.1
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH 08/10] ARM: dts: qcom: apq8060-dragonboard: move regulators out of simple-bus
2023-04-20 7:50 ` [PATCH 08/10] ARM: dts: qcom: apq8060-dragonboard: move regulators out of simple-bus Krzysztof Kozlowski
@ 2023-04-20 10:49 ` Konrad Dybcio
0 siblings, 0 replies; 21+ messages in thread
From: Konrad Dybcio @ 2023-04-20 10:49 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 20.04.2023 09:50, Krzysztof Kozlowski wrote:
> Regulators is not a bus, so drop incomplete simple-bus usage to fix dtbs
> W=1 warnings:
>
> Warning (simple_bus_reg): /regulators/regulator-fixed: missing or empty reg/ranges property
> Warning (simple_bus_reg): /regulators/xc622a331mrg: missing or empty reg/ranges property
> Warning (simple_bus_reg): /regulators/nds332p: missing or empty reg/ranges property
> Warning (simple_bus_reg): /regulators/txb0104rgyr: missing or empty reg/ranges property
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../arm/boot/dts/qcom-apq8060-dragonboard.dts | 80 +++++++++----------
> 1 file changed, 38 insertions(+), 42 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
> index 8e4b61e4d4b1..e830cb2395aa 100644
> --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
> +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
> @@ -18,50 +18,46 @@ chosen {
> stdout-path = "serial0:115200n8";
> };
>
> - regulators {
> - compatible = "simple-bus";
> -
> - /* Main power of the board: 3.7V */
> - vph: regulator-fixed {
> - compatible = "regulator-fixed";
> - regulator-min-microvolt = <3700000>;
> - regulator-max-microvolt = <3700000>;
> - regulator-name = "VPH";
> - regulator-type = "voltage";
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - /* GPIO controlled ethernet power regulator */
> - dragon_veth: xc622a331mrg {
> - compatible = "regulator-fixed";
> - regulator-name = "XC6222A331MR-G";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&vph>;
> - gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>;
> - enable-active-high;
> - pinctrl-names = "default";
> - pinctrl-0 = <&dragon_veth_gpios>;
> - regulator-always-on;
> - };
> + /* Main power of the board: 3.7V */
> + vph: regulator-fixed {
> + compatible = "regulator-fixed";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> + regulator-name = "VPH";
> + regulator-type = "voltage";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + /* GPIO controlled ethernet power regulator */
> + dragon_veth: xc622a331mrg {
These names could also be fixed up, but that's for another day..
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> + compatible = "regulator-fixed";
> + regulator-name = "XC6222A331MR-G";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&vph>;
> + gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + pinctrl-names = "default";
> + pinctrl-0 = <&dragon_veth_gpios>;
> + regulator-always-on;
> + };
>
> - /* VDDvario fixed regulator */
> - dragon_vario: nds332p {
> - compatible = "regulator-fixed";
> - regulator-name = "NDS332P";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - vin-supply = <&pm8058_s3>;
> - };
> + /* VDDvario fixed regulator */
> + dragon_vario: nds332p {
> + compatible = "regulator-fixed";
> + regulator-name = "NDS332P";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + vin-supply = <&pm8058_s3>;
> + };
>
> - /* This is a levelshifter for SDCC5 */
> - dragon_vio_txb: txb0104rgyr {
> - compatible = "regulator-fixed";
> - regulator-name = "Dragon SDCC levelshifter";
> - vin-supply = <&pm8058_l14>;
> - regulator-always-on;
> - };
> + /* This is a levelshifter for SDCC5 */
> + dragon_vio_txb: txb0104rgyr {
> + compatible = "regulator-fixed";
> + regulator-name = "Dragon SDCC levelshifter";
> + vin-supply = <&pm8058_l14>;
> + regulator-always-on;
> };
>
> /*
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 09/10] ARM: dts: qcom: msm8960-cdp: move regulator out of simple-bus
2023-04-20 7:50 [PATCH 01/10] ARM: dts: qcom: ipq4019: correct syscon unit-address Krzysztof Kozlowski
` (6 preceding siblings ...)
2023-04-20 7:50 ` [PATCH 08/10] ARM: dts: qcom: apq8060-dragonboard: move regulators out of simple-bus Krzysztof Kozlowski
@ 2023-04-20 7:50 ` Krzysztof Kozlowski
2023-04-20 10:49 ` Konrad Dybcio
2023-04-20 7:50 ` [PATCH 10/10] ARM: dts: qcom: apq8084: correct thermal sensor unit-address Krzysztof Kozlowski
` (2 subsequent siblings)
10 siblings, 1 reply; 21+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-20 7:50 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
Regulators is not a bus, so drop incomplete simple-bus usage to fix dtbs
W=1 warning:
Warning (simple_bus_reg): /regulators/gpio-regulator: missing or empty reg/ranges property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/qcom-msm8960-cdp.dts | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 8fa2befa629a..6c1bc3818883 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -15,16 +15,12 @@ chosen {
stdout-path = "serial0:115200n8";
};
- regulators {
- compatible = "simple-bus";
-
- ext_l2: gpio-regulator {
- compatible = "regulator-fixed";
- regulator-name = "ext_l2";
- gpio = <&msmgpio 91 0>;
- startup-delay-us = <10000>;
- enable-active-high;
- };
+ ext_l2: gpio-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "ext_l2";
+ gpio = <&msmgpio 91 0>;
+ startup-delay-us = <10000>;
+ enable-active-high;
};
};
--
2.34.1
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH 09/10] ARM: dts: qcom: msm8960-cdp: move regulator out of simple-bus
2023-04-20 7:50 ` [PATCH 09/10] ARM: dts: qcom: msm8960-cdp: move regulator " Krzysztof Kozlowski
@ 2023-04-20 10:49 ` Konrad Dybcio
0 siblings, 0 replies; 21+ messages in thread
From: Konrad Dybcio @ 2023-04-20 10:49 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 20.04.2023 09:50, Krzysztof Kozlowski wrote:
> Regulators is not a bus, so drop incomplete simple-bus usage to fix dtbs
> W=1 warning:
>
> Warning (simple_bus_reg): /regulators/gpio-regulator: missing or empty reg/ranges property
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm/boot/dts/qcom-msm8960-cdp.dts | 16 ++++++----------
> 1 file changed, 6 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
> index 8fa2befa629a..6c1bc3818883 100644
> --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
> +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
> @@ -15,16 +15,12 @@ chosen {
> stdout-path = "serial0:115200n8";
> };
>
> - regulators {
> - compatible = "simple-bus";
> -
> - ext_l2: gpio-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "ext_l2";
> - gpio = <&msmgpio 91 0>;
> - startup-delay-us = <10000>;
> - enable-active-high;
> - };
> + ext_l2: gpio-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "ext_l2";
> + gpio = <&msmgpio 91 0>;
> + startup-delay-us = <10000>;
> + enable-active-high;
> };
> };
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 10/10] ARM: dts: qcom: apq8084: correct thermal sensor unit-address
2023-04-20 7:50 [PATCH 01/10] ARM: dts: qcom: ipq4019: correct syscon unit-address Krzysztof Kozlowski
` (7 preceding siblings ...)
2023-04-20 7:50 ` [PATCH 09/10] ARM: dts: qcom: msm8960-cdp: move regulator " Krzysztof Kozlowski
@ 2023-04-20 7:50 ` Krzysztof Kozlowski
2023-04-20 10:50 ` Konrad Dybcio
2023-04-20 10:45 ` [PATCH 01/10] ARM: dts: qcom: ipq4019: correct syscon unit-address Konrad Dybcio
2023-05-25 4:54 ` (subset) " Bjorn Andersson
10 siblings, 1 reply; 21+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-20 7:50 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc/thermal-sensor@fc4a8000: simple-bus unit address format error, expected "fc4a9000"
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/qcom-apq8084.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 83839e1ec4d1..8f178bc87e1d 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -507,7 +507,7 @@ tsens_s4_p2_backup: s4-p2_backup@44e {
};
};
- tsens: thermal-sensor@fc4a8000 {
+ tsens: thermal-sensor@fc4a9000 {
compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
reg = <0xfc4a9000 0x1000>, /* TM */
<0xfc4a8000 0x1000>; /* SROT */
--
2.34.1
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH 10/10] ARM: dts: qcom: apq8084: correct thermal sensor unit-address
2023-04-20 7:50 ` [PATCH 10/10] ARM: dts: qcom: apq8084: correct thermal sensor unit-address Krzysztof Kozlowski
@ 2023-04-20 10:50 ` Konrad Dybcio
0 siblings, 0 replies; 21+ messages in thread
From: Konrad Dybcio @ 2023-04-20 10:50 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 20.04.2023 09:50, Krzysztof Kozlowski wrote:
> Match unit-address to reg entry to fix dtbs W=1 warnings:
>
> Warning (simple_bus_reg): /soc/thermal-sensor@fc4a8000: simple-bus unit address format error, expected "fc4a9000"
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm/boot/dts/qcom-apq8084.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
> index 83839e1ec4d1..8f178bc87e1d 100644
> --- a/arch/arm/boot/dts/qcom-apq8084.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
> @@ -507,7 +507,7 @@ tsens_s4_p2_backup: s4-p2_backup@44e {
> };
> };
>
> - tsens: thermal-sensor@fc4a8000 {
> + tsens: thermal-sensor@fc4a9000 {
> compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
> reg = <0xfc4a9000 0x1000>, /* TM */
> <0xfc4a8000 0x1000>; /* SROT */
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 01/10] ARM: dts: qcom: ipq4019: correct syscon unit-address
2023-04-20 7:50 [PATCH 01/10] ARM: dts: qcom: ipq4019: correct syscon unit-address Krzysztof Kozlowski
` (8 preceding siblings ...)
2023-04-20 7:50 ` [PATCH 10/10] ARM: dts: qcom: apq8084: correct thermal sensor unit-address Krzysztof Kozlowski
@ 2023-04-20 10:45 ` Konrad Dybcio
2023-05-25 4:54 ` (subset) " Bjorn Andersson
10 siblings, 0 replies; 21+ messages in thread
From: Konrad Dybcio @ 2023-04-20 10:45 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 20.04.2023 09:50, Krzysztof Kozlowski wrote:
> Match unit-address to reg entry to fix dtbs W=1 warnings:
>
> Warning (simple_bus_reg): /soc/syscon@1fcb000: simple-bus unit address format error, expected "1fc0000"
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm/boot/dts/qcom-sdx55.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
> index 342c3d14001e..72d82a9a6cc5 100644
> --- a/arch/arm/boot/dts/qcom-sdx55.dtsi
> +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
> @@ -515,7 +515,7 @@ tcsr_mutex: hwlock@1f40000 {
> #hwlock-cells = <1>;
> };
>
> - tcsr: syscon@1fcb000 {
> + tcsr: syscon@1fc0000 {
> compatible = "qcom,sdx55-tcsr", "syscon";
> reg = <0x01fc0000 0x1000>;
> };
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: (subset) [PATCH 01/10] ARM: dts: qcom: ipq4019: correct syscon unit-address
2023-04-20 7:50 [PATCH 01/10] ARM: dts: qcom: ipq4019: correct syscon unit-address Krzysztof Kozlowski
` (9 preceding siblings ...)
2023-04-20 10:45 ` [PATCH 01/10] ARM: dts: qcom: ipq4019: correct syscon unit-address Konrad Dybcio
@ 2023-05-25 4:54 ` Bjorn Andersson
10 siblings, 0 replies; 21+ messages in thread
From: Bjorn Andersson @ 2023-05-25 4:54 UTC (permalink / raw)
To: Krzysztof Kozlowski, linux-kernel, linux-arm-msm, Konrad Dybcio,
devicetree, Krzysztof Kozlowski, Rob Herring, Andy Gross
On Thu, 20 Apr 2023 09:50:44 +0200, Krzysztof Kozlowski wrote:
> Match unit-address to reg entry to fix dtbs W=1 warnings:
>
> Warning (simple_bus_reg): /soc/syscon@1fcb000: simple-bus unit address format error, expected "1fc0000"
>
>
Applied, thanks!
[01/10] ARM: dts: qcom: ipq4019: correct syscon unit-address
commit: 2c7a2700bad5f735b76acaaf721752f33e030497
[02/10] ARM: dts: qcom: sdx55: correct rsc unit-address
commit: 59cf17540e48ab6c37289f0333bdf0b9c639ba80
[03/10] ARM: dts: qcom: msm8974: correct pronto unit-address
commit: 547c0034b40ee18e5e4b48501b935f0ab8f70a37
[04/10] ARM: dts: qcom: ipq8064: drop leading 0 from unit-address
commit: 038b8980077bf02c82324aefd6b69e00f5b8a1a2
[05/10] ARM: dts: qcom: ipq8064: drop invalid GCC thermal-sensor unit-address
commit: 0dd882ae3dd9cfb51d5dc5083da3af7a35db1355
[06/10] ARM: dts: qcom: ipq8064: correct LED node names
commit: 740e5ecb78d4426526cb2b3f49d0043225a8bed9
[07/10] ARM: dts: qcom: ipq8064: align USB node names with bindings
commit: c13ba9b148716160a2cbbc7620944a976b6b1491
[08/10] ARM: dts: qcom: apq8060-dragonboard: move regulators out of simple-bus
commit: f0e401e15d3eab570f92fab2c9ce56a2564fa828
[09/10] ARM: dts: qcom: msm8960-cdp: move regulator out of simple-bus
commit: 71abfd7a0a100010d32edb28917f437537afbb7f
[10/10] ARM: dts: qcom: apq8084: correct thermal sensor unit-address
commit: a8311da44f38a2f52cb4cf44710c95c1e6f2f6ec
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 21+ messages in thread