Re: [PATCH 3/4] drm/msm/a6xx: Program the PDC sequencer on Adreno 620

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 10/16/26 2:53 PM, Ishu Brar via B4 Relay wrote:
> From: Ishu Brar <patches@brar.si>
> 
> Unlike the rest of the A650 family, the A620 does not get its PDC set up
> by AOP (the downstream devicetree has no pdc_in_aop for it). Without the
> sequence, the RSC never acks the second power-up ("Unable to power on
> the GPU RSC") and the device hangs.
> 
> Program the sequence from the driver, taking the xo, mx and cx resource
> addresses from cmd-db instead of the hardcoded ones.
> 
> Assisted-by: Claude
> Signed-off-by: Ishu Brar <patches@brar.si>
> ---

There's also this hunk in kgsl:

    _regwrite(cfg, PDC_GPU_TCS1_CMD0_ADDR + PDC_CMD_OFFSET * 2,
                        xo_resource_addr);

        _regwrite(cfg, PDC_GPU_TCS1_CMD0_DATA + PDC_CMD_OFFSET * 2, 0x0);


====
        if (vrm_resource_addr && adreno_is_a620(adreno_dev)) {
                _regwrite(cfg, PDC_GPU_TCS1_CMD0_MSGID + PDC_CMD_OFFSET * 3,
                                0x10108);
                _regwrite(cfg, PDC_GPU_TCS1_CMD0_ADDR + PDC_CMD_OFFSET * 3,
                                vrm_resource_addr + 0x4);
                _regwrite(cfg, PDC_GPU_TCS1_CMD0_DATA + PDC_CMD_OFFSET * 3,
                                0x0);
        }
====

        _regwrite(cfg, PDC_GPU_TCS3_CMD_ENABLE_BANK, 7);
        _regwrite(cfg, PDC_GPU_TCS3_CMD_WAIT_FOR_CMPL_BANK, 0);
        _regwrite(cfg, PDC_GPU_TCS3_CONTROL, 0);
        _regwrite(cfg, PDC_GPU_TCS3_CMD0_MSGID, 0x10108);


if vrm.soc exists (presumably because a620 shipped on a number of socs?)

Konrad