mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Tom Lendacky <thomas.lendacky@amd.com>
To: <linux-kernel@vger.kernel.org>, <x86@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Andy Lutomirski <luto@kernel.org>,
	"Peter Zijlstra" <peterz@infradead.org>,
	Dan Williams <dan.j.williams@intel.com>,
	Michael Roth <michael.roth@amd.com>,
	Ashish Kalra <ashish.kalra@amd.com>
Subject: [PATCH v2 01/14] x86/sev: Rename snp_init() in the boot/compressed/sev.c file
Date: Fri, 8 Mar 2024 12:35:16 -0600	[thread overview]
Message-ID: <d558343480a78b53ac419ce67fc9f13d631672a4.1709922929.git.thomas.lendacky@amd.com> (raw)
In-Reply-To: <cover.1709922929.git.thomas.lendacky@amd.com>

The snp_init() function is local to the boot/compressed/sev.c file and is
not called from outside of the file. Change the name so that it is not
tied to the function definition in arch/x86/include/asm/sev.h. Move the
renamed snp_init() and related functions up in the file to avoid having to
add a forward declaration and make the function static, too.

This will allow the snp_init() function in arch/x86/kernel/sev.c to be
changed without having to make the same change in boot/compressed/sev.c.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
 arch/x86/boot/compressed/sev.c | 162 ++++++++++++++++-----------------
 1 file changed, 81 insertions(+), 81 deletions(-)

diff --git a/arch/x86/boot/compressed/sev.c b/arch/x86/boot/compressed/sev.c
index ec71846d28c9..bec0bbfc6403 100644
--- a/arch/x86/boot/compressed/sev.c
+++ b/arch/x86/boot/compressed/sev.c
@@ -413,6 +413,85 @@ void snp_check_features(void)
 	}
 }
 
+/* Search for Confidential Computing blob in the EFI config table. */
+static struct cc_blob_sev_info *find_cc_blob_efi(struct boot_params *bp)
+{
+	unsigned long cfg_table_pa;
+	unsigned int cfg_table_len;
+	int ret;
+
+	ret = efi_get_conf_table(bp, &cfg_table_pa, &cfg_table_len);
+	if (ret)
+		return NULL;
+
+	return (struct cc_blob_sev_info *)efi_find_vendor_table(bp, cfg_table_pa,
+								cfg_table_len,
+								EFI_CC_BLOB_GUID);
+}
+
+/*
+ * Initial set up of SNP relies on information provided by the
+ * Confidential Computing blob, which can be passed to the boot kernel
+ * by firmware/bootloader in the following ways:
+ *
+ * - via an entry in the EFI config table
+ * - via a setup_data structure, as defined by the Linux Boot Protocol
+ *
+ * Scan for the blob in that order.
+ */
+static struct cc_blob_sev_info *find_cc_blob(struct boot_params *bp)
+{
+	struct cc_blob_sev_info *cc_info;
+
+	cc_info = find_cc_blob_efi(bp);
+	if (cc_info)
+		goto found_cc_info;
+
+	cc_info = find_cc_blob_setup_data(bp);
+	if (!cc_info)
+		return NULL;
+
+found_cc_info:
+	if (cc_info->magic != CC_BLOB_SEV_HDR_MAGIC)
+		sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SNP_UNSUPPORTED);
+
+	return cc_info;
+}
+
+/*
+ * Indicate SNP based on presence of SNP-specific CC blob. Subsequent checks
+ * will verify the SNP CPUID/MSR bits.
+ */
+static bool snp_setup(struct boot_params *bp)
+{
+	struct cc_blob_sev_info *cc_info;
+
+	if (!bp)
+		return false;
+
+	cc_info = find_cc_blob(bp);
+	if (!cc_info)
+		return false;
+
+	/*
+	 * If a SNP-specific Confidential Computing blob is present, then
+	 * firmware/bootloader have indicated SNP support. Verifying this
+	 * involves CPUID checks which will be more reliable if the SNP
+	 * CPUID table is used. See comments over snp_setup_cpuid_table() for
+	 * more details.
+	 */
+	setup_cpuid_table(cc_info);
+
+	/*
+	 * Pass run-time kernel a pointer to CC info via boot_params so EFI
+	 * config table doesn't need to be searched again during early startup
+	 * phase.
+	 */
+	bp->cc_blob_address = (u32)(unsigned long)cc_info;
+
+	return true;
+}
+
 /*
  * sev_check_cpu_support - Check for SEV support in the CPU capabilities
  *
@@ -463,7 +542,7 @@ void sev_enable(struct boot_params *bp)
 		bp->cc_blob_address = 0;
 
 	/*
-	 * Do an initial SEV capability check before snp_init() which
+	 * Do an initial SEV capability check before snp_setup() which
 	 * loads the CPUID page and the same checks afterwards are done
 	 * without the hypervisor and are trustworthy.
 	 *
@@ -478,7 +557,7 @@ void sev_enable(struct boot_params *bp)
 	 * Setup/preliminary detection of SNP. This will be sanity-checked
 	 * against CPUID/MSR values later.
 	 */
-	snp = snp_init(bp);
+	snp = snp_setup(bp);
 
 	/* Now repeat the checks with the SNP CPUID table. */
 
@@ -535,85 +614,6 @@ u64 sev_get_status(void)
 	return m.q;
 }
 
-/* Search for Confidential Computing blob in the EFI config table. */
-static struct cc_blob_sev_info *find_cc_blob_efi(struct boot_params *bp)
-{
-	unsigned long cfg_table_pa;
-	unsigned int cfg_table_len;
-	int ret;
-
-	ret = efi_get_conf_table(bp, &cfg_table_pa, &cfg_table_len);
-	if (ret)
-		return NULL;
-
-	return (struct cc_blob_sev_info *)efi_find_vendor_table(bp, cfg_table_pa,
-								cfg_table_len,
-								EFI_CC_BLOB_GUID);
-}
-
-/*
- * Initial set up of SNP relies on information provided by the
- * Confidential Computing blob, which can be passed to the boot kernel
- * by firmware/bootloader in the following ways:
- *
- * - via an entry in the EFI config table
- * - via a setup_data structure, as defined by the Linux Boot Protocol
- *
- * Scan for the blob in that order.
- */
-static struct cc_blob_sev_info *find_cc_blob(struct boot_params *bp)
-{
-	struct cc_blob_sev_info *cc_info;
-
-	cc_info = find_cc_blob_efi(bp);
-	if (cc_info)
-		goto found_cc_info;
-
-	cc_info = find_cc_blob_setup_data(bp);
-	if (!cc_info)
-		return NULL;
-
-found_cc_info:
-	if (cc_info->magic != CC_BLOB_SEV_HDR_MAGIC)
-		sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SNP_UNSUPPORTED);
-
-	return cc_info;
-}
-
-/*
- * Indicate SNP based on presence of SNP-specific CC blob. Subsequent checks
- * will verify the SNP CPUID/MSR bits.
- */
-bool snp_init(struct boot_params *bp)
-{
-	struct cc_blob_sev_info *cc_info;
-
-	if (!bp)
-		return false;
-
-	cc_info = find_cc_blob(bp);
-	if (!cc_info)
-		return false;
-
-	/*
-	 * If a SNP-specific Confidential Computing blob is present, then
-	 * firmware/bootloader have indicated SNP support. Verifying this
-	 * involves CPUID checks which will be more reliable if the SNP
-	 * CPUID table is used. See comments over snp_setup_cpuid_table() for
-	 * more details.
-	 */
-	setup_cpuid_table(cc_info);
-
-	/*
-	 * Pass run-time kernel a pointer to CC info via boot_params so EFI
-	 * config table doesn't need to be searched again during early startup
-	 * phase.
-	 */
-	bp->cc_blob_address = (u32)(unsigned long)cc_info;
-
-	return true;
-}
-
 void sev_prep_identity_maps(unsigned long top_level_pgt)
 {
 	/*
-- 
2.43.2


  reply	other threads:[~2024-03-08 18:35 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-08 18:35 [PATCH v2 00/14] Provide SEV-SNP support for running under an SVSM Tom Lendacky
2024-03-08 18:35 ` Tom Lendacky [this message]
2024-03-10 21:25   ` [PATCH v2 01/14] x86/sev: Rename snp_init() in the boot/compressed/sev.c file Borislav Petkov
2024-03-11 16:16     ` Tom Lendacky
2024-03-08 18:35 ` [PATCH v2 02/14] x86/sev: Make the VMPL0 checking function more generic Tom Lendacky
2024-03-08 18:35 ` [PATCH v2 03/14] x86/sev: Check for the presence of an SVSM in the SNP Secrets page Tom Lendacky
2024-03-09  0:33   ` Dionna Amalie Glaze
2024-03-11 14:50     ` Tom Lendacky
2024-03-08 18:35 ` [PATCH v2 04/14] x86/sev: Use kernel provided SVSM Calling Areas Tom Lendacky
2024-03-08 18:35 ` [PATCH v2 05/14] x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0 Tom Lendacky
2024-03-08 18:35 ` [PATCH v2 06/14] x86/sev: Use the SVSM to create a vCPU when not in VMPL0 Tom Lendacky
2024-03-08 18:35 ` [PATCH v2 07/14] x86/sev: Provide SVSM discovery support Tom Lendacky
2024-03-08 18:35 ` [PATCH v2 08/14] x86/sev: Provide guest VMPL level to userspace Tom Lendacky
2024-03-08 18:35 ` [PATCH v2 09/14] virt: sev-guest: Choose the VMPCK key based on executing VMPL Tom Lendacky
2024-03-08 18:35 ` [PATCH v2 10/14] configfs-tsm: Allow the privlevel_floor attribute to be updated Tom Lendacky
2024-03-08 18:35 ` [PATCH v2 11/14] x86/sev: Extend the config-fs attestation support for an SVSM Tom Lendacky
2024-03-10  6:06   ` Kuppuswamy, Sathyanarayanan
2024-03-11 16:16     ` Tom Lendacky
2024-03-12  5:57       ` Kuppuswamy Sathyanarayanan
2024-03-12 13:29         ` Tom Lendacky
2024-03-08 18:35 ` [PATCH v2 12/14] fs/configfs: Add a callback to determine attribute visibility Tom Lendacky
2024-03-11 19:58   ` Tom Lendacky
2024-03-13 21:37   ` Joel Becker
2024-03-14 14:23     ` Tom Lendacky
2024-03-21  2:40       ` Dan Williams
2024-03-08 18:35 ` [PATCH v2 13/14] x86/sev: Hide SVSM attestation entries if not running under an SVSM Tom Lendacky
2024-03-23 17:24   ` Kuppuswamy, Sathyanarayanan
2024-03-25 14:05     ` Tom Lendacky
2024-03-26  1:10       ` Kuppuswamy Sathyanarayanan
2024-03-08 18:35 ` [PATCH v2 14/14] x86/sev: Allow non-VMPL0 execution when an SVSM is present Tom Lendacky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d558343480a78b53ac419ce67fc9f13d631672a4.1709922929.git.thomas.lendacky@amd.com \
    --to=thomas.lendacky@amd.com \
    --cc=ashish.kalra@amd.com \
    --cc=bp@alien8.de \
    --cc=dan.j.williams@intel.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=michael.roth@amd.com \
    --cc=mingo@redhat.com \
    --cc=peterz@infradead.org \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®