Re: [PATCH v2 9/9] ARM64: xilinx: zynqmp: Add spi-buses property

[Krzysztof Kozlowski <krzk@kernel.org>]

On 17/06/2025 00:00, Sean Anderson wrote:
> Add the spi-buses property to the ZynqMP devicetrees. This is pretty
> simple, since all boards use the lower bus.
> 
> Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
> ---
> 
> (no changes since v1)
> 
>  arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts      | 1 +
>  arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts      | 1 +
>  arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 1 +
>  arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts | 1 +
>  arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts      | 1 +
>  arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts      | 1 +
>  arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts      | 1 +
>  arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts      | 1 +
>  arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts      | 1 +
>  arch/arm64/boot/dts/xilinx/zynqmp-zcu1275-revA.dts     | 1 +
>  10 files changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
> index bfa7ea6b9224..3d3cb656f38c 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
> @@ -132,6 +132,7 @@ &qspi { /* MIO 0-5 - U143 */
>  	spi_flash: flash@0 { /* MT25QU512A */
>  		compatible = "jedec,spi-nor"; /* 64MB */
>  		reg = <0>;
> +		spi-buses = <0>;

Default is 0, so this entire patch is noop. Commit msg should explain
that if noop is still needed for any reason.

Best regards,
Krzysztof